OID reference

bgpPeergrTtlSecurityMinTtl

1.2.826.42.1.1578918.5.65.1.5.7.1.68

Description

The minimum TTL (for IPv4) or Hop Limit (for IPv6) that must be set in a BGP packet received from this peer. This field is used to enable the Generalized TTL Security Mechanism (GTSM), as defined in RFC 5082. If set to 0, then no restriction is applied to received packets (that is, GTSM is not enabled). If set to any …

Full description and source information

Identification

Identifier and names

Parent
1.2.826.42.1.1578918.5.65.1.5.7.1 (bgpPeergrEntry)
Node code
68
Node name
bgpPeergrTtlSecurityMinTtl
Category
SNMP management object
Numeric OID
1.2.826.42.1.1578918.5.65.1.5.7.1.68
URN notation
urn:oid:1.2.826.42.1.1578918.5.65.1.5.7.1.68
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 2 826 42 1 1578918 5 65 1 5 7 1 68}

  • {iso(1) member-body(2) gb(826) 42 1 1578918 5 65 bgpMib(1) bgpPib(5) bgpPeergrTable(7) bgpPeergrEntry(1) bgpPeergrTtlSecurityMinTtl(68)}
  • {iso(1) memberBody(2) gb(826) 42 1 1578918 5 65 bgpMib(1) bgpPib(5) bgpPeergrTable(7) bgpPeergrEntry(1) bgpPeergrTtlSecurityMinTtl(68)}
OID-IRI notation
  • /1/2/826/42/1/1578918/5/65/1/5/7/1/68
  • /ISO/Member-Body/GB/42/1/1578918/5/65/1/5/7/1/68
  • /ISO/Member-Body/826/42/1/1578918/5/65/1/5/7/1/68
  • /ISO/2/826/42/1/1578918/5/65/1/5/7/1/68
Named path variants
  • /iso/member-body/gb/42/1/1578918/5/65/bgpMib/bgpPib/bgpPeergrTable/bgpPeergrEntry/bgpPeergrTtlSecurityMinTtl
  • /iso/memberBody/gb/42/1/1578918/5/65/bgpMib/bgpPib/bgpPeergrTable/bgpPeergrEntry/bgpPeergrTtlSecurityMinTtl

SNMP properties

Value type
Integer32
Maximum access defined by MIB
read-create
Status in MIB
current
Default value
0

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: bgpRmEntIndex, bgpPeergrIndex.

snmpwalk [connection options] DEVICE .1.2.826.42.1.1578918.5.65.1.5.7.1.68

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

The displayed source records contain one distinct definition. Compare its source records.

bgpPeergrTtlSecurityMinTtl OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION "The minimum TTL (for IPv4) or Hop Limit (for IPv6) that
                must be set in a BGP packet received from this peer.  This
                field is used to enable the Generalized TTL Security
                Mechanism (GTSM), as defined in RFC 5082.

                If set to 0, then no restriction is applied to received
                packets (that is, GTSM is not enabled).

                If set to any other value, then packets received from a
                peer with a TTL or Hop Limit less than the specified value
                will be dropped.  A non-zero value also means that DC-BGP
                will send packets to this peer with TTL set to 255, as
                specified in RFC 5082.  This overrides the TTL value
                specified in bgpPeerTtl or bgpPeergrTtl.

                Note that the typical use case for GTSM is for directly
                connected peers, where this field should be set to 254.
                Non-directly connected peers may still use this feature,
                with a lower value for this field, but the value must be
                chosen such that changes in the network topology do not
                cause packets to be dropped incorrectly.

                This field can be changed at any time.  However, if a peer
                is configured to use the peer group field and the field is
                changed while the peer is active, depending on the setting
                of the bgpPeergrResetPeerOnCfgChange field, the peer
                session may either be immediately reset, or the
                configuration change is not applied until the peer session
                is restarted."
    DEFVAL      { 0 }
    ::= {bgpPeergrEntry 68 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The minimum TTL (for IPv4) or Hop Limit (for IPv6) that must be set in a BGP packet received from this peer. This field is used to enable the Generalized TTL Security Mechanism (GTSM), as defined in RFC 5082. If set to 0, then no restriction is applied to received packets (that is, GTSM is not enabled). If set to any other value, then packets received from a peer with a TTL or Hop Limit less than the specified value will be dropped. A non-zero value also means that DC-BGP will send packets to this peer with TTL set to 255, as specified in RFC 5082. This overrides the TTL value specified in bgpPeerTtl or bgpPeergrTtl. Note that the typical use case for GTSM is for directly connected peers, where this field should be set to 254. Non-directly connected peers may still use this feature, with a lower value for this field, but the value must be chosen such that changes in the network topology do not cause packets to be dropped incorrectly. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is active, depending on the setting of the bgpPeergrResetPeerOnCfgChange field, the peer session may either be immediately reset, or the configuration change is not applied until the peer session is restarted.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

bgpPeergrTtlSecurityMinTtl · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: bgpPeergrTtlSecurityMinTtl

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "bgpPeergrTtlSecurityMinTtl",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-create",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The minimum TTL (for IPv4) or Hop Limit (for IPv6) that must be set in a BGP packet received from this peer. This field is used to enable the Generalized TTL Security Mechanism (GTSM), as defined in RFC 5082. If set to 0, then no restriction is applied to received packets (that is, GTSM is not enabled). If set to any other value, then packets received from a peer with a TTL or Hop Limit less than the specified value will be dropped. A non-zero value also means that DC-BGP will send packets to this peer with TTL set to 255, as specified in RFC 5082. This overrides the TTL value specified in bgpPeerTtl or bgpPeergrTtl. Note that the typical use case for GTSM is for directly connected peers, where this field should be set to 254. Non-directly connected peers may still use this feature, with a lower value for this field, but the value must be chosen such that changes in the network topology do not cause packets to be dropped incorrectly. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is active, depending on the setting of the bgpPeergrResetPeerOnCfgChange field, the peer session may either be immediately reset, or the configuration change is not applied until the peer session is restarted.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "bgpPeergrEntry",
    "68",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-create"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The minimum TTL (for IPv4) or Hop Limit (for IPv6) that must be set in a BGP packet received from this peer. This field is used to enable the Generalized TTL Security Mechanism (GTSM), as defined in RFC 5082. If set to 0, then no restriction is applied to received packets (that is, GTSM is not enabled). If set to any other value, then packets received from a peer with a TTL or Hop Limit less than the specified value will be dropped. A non-zero value also means that DC-BGP will send packets to this peer with TTL set to 255, as specified in RFC 5082. This overrides the TTL value specified in bgpPeerTtl or bgpPeergrTtl. Note that the typical use case for GTSM is for directly connected peers, where this field should be set to 254. Non-directly connected peers may still use this feature, with a lower value for this field, but the value must be chosen such that changes in the network topology do not cause packets to be dropped incorrectly. This field can be changed at any time. However, if a peer is configured to use the peer group field and the field is changed while the peer is active, depending on the setting of the bgpPeergrResetPeerOnCfgChange field, the peer session may either be immediately reset, or the configuration change is not applied until the peer session is restarted."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.2.826)

The UK Name Registration Authority

Current Registration Authority (inferred from ancestor 1.2.826)

Mark Barratt or Vanessa Tatler

Siblings (69)

OIDNameDirect childrenDescendantsDescription
1.2.826.42.1.1578918.5.65.1.5.7.1.52 bgpPeergrDistListAclIn00
1.2.826.42.1.1578918.5.65.1.5.7.1.53 bgpPeergrDistListAclOut00
1.2.826.42.1.1578918.5.65.1.5.7.1.54 bgpPeergrDistListPlIn00
1.2.826.42.1.1578918.5.65.1.5.7.1.55 bgpPeergrDistListPlOut00
1.2.826.42.1.1578918.5.65.1.5.7.1.56 bgpPeergrFilterListIn00
1.2.826.42.1.1578918.5.65.1.5.7.1.57 bgpPeergrFilterListOut00
1.2.826.42.1.1578918.5.65.1.5.7.1.58 bgpPeergrAddrSourceIf00
1.2.826.42.1.1578918.5.65.1.5.7.1.59 bgpPeergrUseImportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.60 bgpPeergrImportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.61 bgpPeergrUseExportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.62 bgpPeergrExportLocalPref00
1.2.826.42.1.1578918.5.65.1.5.7.1.63 bgpPeergrSlowPeer00
1.2.826.42.1.1578918.5.65.1.5.7.1.64 bgpPeergrAddrSourceType00
1.2.826.42.1.1578918.5.65.1.5.7.1.65 bgpPeergrAddrSource00
1.2.826.42.1.1578918.5.65.1.5.7.1.66 bgpPeergrMaxPrfxClear00
1.2.826.42.1.1578918.5.65.1.5.7.1.67 bgpPeergrPrfxThresholdClear00
1.2.826.42.1.1578918.5.65.1.5.7.1.69 bgpPeergrRemovePrivateAs00
1.2.826.42.1.1578918.5.65.1.5.7.1.70 bgpPeergrResetPeerOnCfgChange00
1.2.826.42.1.1578918.5.65.1.5.7.1.71 bgpPeergrAdminStatus00