This attribute indicates the channel set for this Peer-to-Peer Event report. Country, Operating Class, and Channel Number together specify the channel frequency and spacing for this measurement request. Valid values of Operating Class are shown in Annex E.
Parsed from file 802_11mib.txt
Company: ieee
Module: IEEE802dot11-MIB
Vendor: IEEE
Module: IEEE802dot11-MIB (802_11mib)
Type: TABULAR
Access: read-only
Syntax: Unsigned32
(
1..255 )
Automatically extracted from www.mibdepot.com
dot11WirelessMGTEventPeerOperatingClass OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute indicates the channel set for this Peer-to-Peer Event report. Country, Operating Class, and Channel Number together specify the channel frequency and spacing for this measurement request. Valid values of Operating Class are shown in Annex E." ::= { dot11WirelessMGTEventEntry 23 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.2.840.10036.1.21.1.1 | dot11WirelessMGTEventIndex | 0 | 0 | This attribute contains an auxiliary index into the dot11WirelessMGTEventTable. |
| 1.2.840.10036.1.21.1.2 | dot11WirelessMGTEventMACAddress | 0 | 0 | This attribute is the MAC address of the STA providing the Event Report. |
| 1.2.840.10036.1.21.1.3 | dot11WirelessMGTEventType | 0 | 0 | This attribute indicates the request type of this WNM Event request. |
| 1.2.840.10036.1.21.1.4 | dot11WirelessMGTEventStatus | 0 | 0 | This attribute contains the status value included in the Event Report. |
| 1.2.840.10036.1.21.1.5 | dot11WirelessMGTEventTSF | 0 | 0 | This attribute contains the value of the Event timestamp field. |
| 1.2.840.10036.1.21.1.6 | dot11WirelessMGTEventUTCOffset | 0 | 0 | This attribute indicates the UTC Offset Time Value optionally included in the Event Report. |
| 1.2.840.10036.1.21.1.7 | dot11WirelessMGTEventTimeError | 0 | 0 | This attribute contains the value of the Event Time Error field optionally included in the Event Report. |
| 1.2.840.10036.1.21.1.8 | dot11WirelessMGTEventTransitionSourceBSSID | 0 | 0 | This attribute contains the value of the Source BSSID field in a Transition event report. |
| 1.2.840.10036.1.21.1.9 | dot11WirelessMGTEventTransitionTargetBSSID | 0 | 0 | This attribute contains the value of the Target BSSID field in a Transition event report. |
| 1.2.840.10036.1.21.1.10 | dot11WirelessMGTEventTransitionTime | 0 | 0 | This attribute indicates the transition time for the reported transition event in TUs. The Transition time is defined as the ti… |
| 1.2.840.10036.1.21.1.11 | dot11WirelessMGTEventTransitionReason | 0 | 0 | This attribute indicates the reason for the reported BSS Transition event. The format for this list of reasons is further detai… |
| 1.2.840.10036.1.21.1.12 | dot11WirelessMGTEventTransitionResult | 0 | 0 | This attribute indicates the result of the attempted transition and is set to one of the status codes specified in Table 8-37. |
| 1.2.840.10036.1.21.1.13 | dot11WirelessMGTEventTransitionSourceRCPI | 0 | 0 | This attribute indicates the received channel power of the most recently measured frame from the Source BSSID before the STA re… |
| 1.2.840.10036.1.21.1.14 | dot11WirelessMGTEventTransitionSourceRSNI | 0 | 0 | This attribute indicates the received signal-to-noise indication of the most recently measured frame from the Source BSSID befo… |
| 1.2.840.10036.1.21.1.15 | dot11WirelessMGTEventTransitionTargetRCPI | 0 | 0 | This attribute indicates the received channel power of the first measured frame just after STA reassociates to the Target BSSID… |
| 1.2.840.10036.1.21.1.16 | dot11WirelessMGTEventTransitionTargetRSNI | 0 | 0 | This attribute indicates the received signal-to-noise indication of the first measured frame just after STA reassociates to the… |
| 1.2.840.10036.1.21.1.17 | dot11WirelessMGTEventRSNATargetBSSID | 0 | 0 | This attribute contains the value of the Target BSSID field in an RSNA event report. |
| 1.2.840.10036.1.21.1.18 | dot11WirelessMGTEventRSNAAuthenticationType | 0 | 0 | This attribute indicates the AKM suite, as defined in Table 8-101. The first three octets indicate the OUI. The last octet indi… |
| 1.2.840.10036.1.21.1.19 | dot11WirelessMGTEventRSNAEAPMethod | 0 | 0 | This attribute indicates a value that identifies the EAP Method. When the Authentication Type field is set to the value of eith… |
| 1.2.840.10036.1.21.1.20 | dot11WirelessMGTEventRSNAResult | 0 | 0 | This attribute indicates the result of the RSNA event and is set to one of the status codes specified in Table 8-37. |
| 1.2.840.10036.1.21.1.21 | dot11WirelessMGTEventRSNARSNElement | 0 | 0 | This attribute contains the entire contents of the negotiated RSNE at the time of the authentication attempt. The format of the… |
| 1.2.840.10036.1.21.1.22 | dot11WirelessMGTEventPeerSTAAddress | 0 | 0 | This attribute indicates the MAC address of the peer STA or IBSS BSSID is equal to the indicated MAC address. If this event is … |
| 1.2.840.10036.1.21.1.24 | dot11WirelessMGTEventPeerChannelNumber | 0 | 0 | This attribute indicates the current operating channel for this Peer-to-Peer Event report. The Channel Number is only defined w… |
| 1.2.840.10036.1.21.1.25 | dot11WirelessMGTEventPeerSTATxPower | 0 | 0 | This attribute indicates the STA transmit power used for the Peer-to-Peer link. The STA Tx Power field indicates the target tra… |
| 1.2.840.10036.1.21.1.26 | dot11WirelessMGTEventPeerConnectionTime | 0 | 0 | This attribute indicates a value representing the connection time for the reported Peer-to-Peer event. If the Peer Status is 0,… |
| 1.2.840.10036.1.21.1.27 | dot11WirelessMGTEventPeerPeerStatus | 0 | 0 | This attribute indicates the Peer link connection status as indicated in Table 8-139. See 8.4.2.70.4. |
| 1.2.840.10036.1.21.1.28 | dot11WirelessMGTEventWNMLog | 0 | 0 | This attribute contains the entire syslog message, consisting of the PRI, HEADER, and MSG portion of a WNM Log message as descr… |