Reference record for OID 1.3.6.1.2.1.10.131.1.1.2

parent

1.3.6.1.2.1.10.131.1.1 (tunnel)

node code

2

node name

tunnelConfigTable

dot oid

1.3.6.1.2.1.10.131.1.1.2

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) tunnelMIB(131) tunnelMIBObjects(1) tunnel(1) tunnelConfigTable(2)}

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) tunnelMIB(131) tunnelMIBObjects(1) tunnel(1) tunnelConfigTable(2)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) tunnelMIB(131) tunnelMIBObjects(1) tunnel(1) tunnelConfigTable(2)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) tunnelMIB(131) tunnelMIBObjects(1) tunnel(1) tunnelConfigTable(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) tunnelMIB(131) tunnelMIBObjects(1) tunnel(1) tunnelConfigTable(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) tunnelMIB(131) tunnelMIBObjects(1) tunnel(1) tunnelConfigTable(2)}

iri oid

/iso/identified-organization/dod/internet/mgmt/mib-2/transmission/tunnelMIB/tunnelMIBObjects/tunnel/tunnelConfigTable

/iso/identified-organization/dod/internet/mgmt/mib/transmission/tunnelMIB/tunnelMIBObjects/tunnel/tunnelConfigTable

/iso/org/dod/internet/mgmt/mib-2/transmission/tunnelMIB/tunnelMIBObjects/tunnel/tunnelConfigTable

/iso/org/dod/internet/mgmt/mib/transmission/tunnelMIB/tunnelMIBObjects/tunnel/tunnelConfigTable

/iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/tunnelMIB/tunnelMIBObjects/tunnel/tunnelConfigTable

/iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/tunnelMIB/tunnelMIBObjects/tunnel/tunnelConfigTable

iri by oid_info

/ISO/Identified-Organization/6/1/2/1/10/131/1/1/2

Description by circitor

The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value. It can also be used for row creation. Note
that every row in the tunnelIfTable with a fixed IPv4
destination address should have a corresponding row in
the tunnelConfigTable, regardless of whether it was
created via SNMP.
Since this table does not support IPv6, it is
deprecated in favor of tunnelInetConfigTable.

Parsed from file TUNNEL-MIB.mib
Module: TUNNEL-MIB

Description by cisco_v1

The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value. It can also be used for row creation. Note
that every row in the tunnelIfTable with a fixed IPv4
destination address should have a corresponding row in
the tunnelConfigTable, regardless of whether it was
created via SNMP.

Since this table does not support IPv6, it is
deprecated in favor of tunnelInetConfigTable.

Description by oid_info

tunnelConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF TunnelConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The (conceptual) table containing information on configured
tunnels. This table can be used to map a set of tunnel
endpoints to the associated ifIndex value. It can also be
used for row creation. Note that every row in the
tunnelIftable with a fixed destination address should have a
corresponding row in the tunnelConfigTable, regardless of
whether it was created via SNMP."
View at oid-info.com

Description by mibdepot

The (conceptual) table containing information on configured
tunnels. This table can be used to map a set of tunnel
endpoints to the associated ifIndex value. It can also be
used for row creation. Note that every row in the
tunnelIfTable with a fixed destination address should have a
corresponding row in the tunnelConfigTable, regardless of
whether it was created via SNMP.

Parsed from file TUNNEL-MIB.txt
Company: None
Module: TUNNEL-MIB

Description by cisco

The (conceptual) table containing information on
configured tunnels. This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value. It can also be used for row creation. Note
that every row in the tunnelIfTable with a fixed IPv4
destination address should have a corresponding row in
the tunnelConfigTable, regardless of whether it was
created via SNMP.

Since this table does not support IPv6, it is
deprecated in favor of tunnelInetConfigTable.

Information by circitor

tunnelConfigTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF TunnelConfigEntry
    MAX-ACCESS not-accessible
    STATUS     deprecated
    DESCRIPTION
						"The (conceptual) table containing information on
							configured tunnels.  This table can be used to map a
							set of tunnel endpoints to the associated ifIndex
							value.  It can also be used for row creation.  Note
							that every row in the tunnelIfTable with a fixed IPv4
							destination address should have a corresponding row in
							the tunnelConfigTable, regardless of whether it was
							created via SNMP.
							Since this table does not support IPv6, it is
							deprecated in favor of tunnelInetConfigTable."
		::= { tunnel 2 }

Information by cisco_v1

tunnelConfigTable OBJECT-TYPE
    SYNTAX SEQUENCE OF TunnelConfigEntry
    ACCESS not-accessible
    STATUS deprecated
    DESCRIPTION
        "The (conceptual) table containing information on
        configured tunnels.  This table can be used to map a
        set of tunnel endpoints to the associated ifIndex
        value.  It can also be used for row creation.  Note
        that every row in the tunnelIfTable with a fixed IPv4
        destination address should have a corresponding row in
        the tunnelConfigTable, regardless of whether it was
        created via SNMP.
        
        Since this table does not support IPv6, it is
        deprecated in favor of tunnelInetConfigTable."
    ::= { tunnel 2 }

Information by oid_info

Automatically extracted from RFC2667

Information by mibdepot

tunnelConfigTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF TunnelConfigEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
            "The (conceptual) table containing information on configured
            tunnels.  This table can be used to map a set of tunnel
            endpoints to the associated ifIndex value.  It can also be
            used for row creation.  Note that every row in the
            tunnelIfTable with a fixed destination address should have a
            corresponding row in the tunnelConfigTable, regardless of
            whether it was created via SNMP."
    ::= { tunnel 2 }

Information by cisco

tunnelConfigTable OBJECT-TYPE
       SYNTAX     SEQUENCE OF TunnelConfigEntry
       MAX-ACCESS not-accessible
       STATUS     deprecated
       DESCRIPTION
               "The (conceptual) table containing information on
               configured tunnels.  This table can be used to map a
               set of tunnel endpoints to the associated ifIndex
               value.  It can also be used for row creation.  Note
               that every row in the tunnelIfTable with a fixed IPv4
               destination address should have a corresponding row in
               the tunnelConfigTable, regardless of whether it was
               created via SNMP.

               Since this table does not support IPv6, it is
               deprecated in favor of tunnelInetConfigTable."
       ::= { tunnel 2 }

First Registration Authority (recovered by parent 1.3.6)

Defense Communication Agency

Current Registration Authority (recovered by parent 1.3.6.1.2)

Internet Assigned Numbers Authority

Children (1)

Brothers (2)