Reference record for OID 1.3.6.1.2.1.10.251.1.5.1.4.1.3



parent
1.3.6.1.2.1.10.251.1.5.1.4.1 (xdsl2LineConfProfModeSpecBandUsEntry)
node code
3
node name
xdsl2LConfProfUpboPsdB
dot oid
1.3.6.1.2.1.10.251.1.5.1.4.1.3
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfModeSpecBandUsTable(4) xdsl2LineConfProfModeSpecBandUsEntry(1) xdsl2LConfProfUpboPsdB(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfModeSpecBandUsTable(4) xdsl2LineConfProfModeSpecBandUsEntry(1) xdsl2LConfProfUpboPsdB(3)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfModeSpecBandUsTable(4) xdsl2LineConfProfModeSpecBandUsEntry(1) xdsl2LConfProfUpboPsdB(3)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfModeSpecBandUsTable(4) xdsl2LineConfProfModeSpecBandUsEntry(1) xdsl2LConfProfUpboPsdB(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfModeSpecBandUsTable(4) xdsl2LineConfProfModeSpecBandUsEntry(1) xdsl2LConfProfUpboPsdB(3)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) transmission(10) vdsl2MIB(251) xdsl2Objects(1) xdsl2Profile(5) xdsl2ProfileLine(1) xdsl2LineConfProfModeSpecBandUsTable(4) xdsl2LineConfProfModeSpecBandUsEntry(1) xdsl2LConfProfUpboPsdB(3)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/transmission/vdsl2MIB/xdsl2Objects/xdsl2Profile/xdsl2ProfileLine/xdsl2LineConfProfModeSpecBandUsTable/xdsl2LineConfProfModeSpecBandUsEntry/xdsl2LConfProfUpboPsdB
  • /iso/identified-organization/dod/internet/mgmt/mib/transmission/vdsl2MIB/xdsl2Objects/xdsl2Profile/xdsl2ProfileLine/xdsl2LineConfProfModeSpecBandUsTable/xdsl2LineConfProfModeSpecBandUsEntry/xdsl2LConfProfUpboPsdB
  • /iso/org/dod/internet/mgmt/mib-2/transmission/vdsl2MIB/xdsl2Objects/xdsl2Profile/xdsl2ProfileLine/xdsl2LineConfProfModeSpecBandUsTable/xdsl2LineConfProfModeSpecBandUsEntry/xdsl2LConfProfUpboPsdB
  • /iso/org/dod/internet/mgmt/mib/transmission/vdsl2MIB/xdsl2Objects/xdsl2Profile/xdsl2ProfileLine/xdsl2LineConfProfModeSpecBandUsTable/xdsl2LineConfProfModeSpecBandUsEntry/xdsl2LConfProfUpboPsdB
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/transmission/vdsl2MIB/xdsl2Objects/xdsl2Profile/xdsl2ProfileLine/xdsl2LineConfProfModeSpecBandUsTable/xdsl2LineConfProfModeSpecBandUsEntry/xdsl2LConfProfUpboPsdB
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/transmission/vdsl2MIB/xdsl2Objects/xdsl2Profile/xdsl2ProfileLine/xdsl2LineConfProfModeSpecBandUsTable/xdsl2LineConfProfModeSpecBandUsEntry/xdsl2LConfProfUpboPsdB
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/10/251/1/5/1/4/1/3

    Description by circitor

    This configuration parameter defines the 'b' reference
    parameter of the UPBO reference PSD used to compute the
    upstream power back-off for the upstream band. A UPBO PSD
    defined for each band shall consist of two parameters [a, b].
    Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
    (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
    dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
    dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
    0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'

    expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
    xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
    a special configuration to disable UPBO in the respective
    upstream band.

    Parsed from file VDSL2-LINE-MIB.mib
    Module: VDSL2-LINE-MIB

    Description by cisco_v1

    This configuration parameter defines the 'b' reference
    parameter of the UPBO reference PSD used to compute the
    upstream power back-off for the upstream band. A UPBO PSD
    defined for each band shall consist of two parameters [a, b].
    Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
    (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
    dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
    dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
    0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'

    expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
    xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
    a special configuration to disable UPBO in the respective
    upstream band.

    Description by oid_info

    xdsl2LConfProfUpboPsdB OBJECT-TYPE
    SYNTAX Integer32(0..4095)
    UNITS "0.01 dBm/Hz"
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "This configuration parameter defines the \b\ reference
    parameter of the UPBO reference PSD used to compute the
    upstream power back-off for the upstream band. A UPBO PSD
    defined for each band shall consist of two parameters [a, b].
    Parameter \a\ (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
    (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
    dBm/Hz; and parameter \b\ (xdsl2LConfProfUpboPsdB) ranges from 0
    dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
    0.01 dBm/Hz. The UPBO reference PSD at the frequency \f\
    expressed in MHz shall be equal to \-a-b(SQRT(f))\. Setting
    xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
    a special configuration to disable UPBO in the respective
    upstream band."
    REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
    DEFVAL { 0 }
    View at oid-info.com

    Description by mibdepot

    This configuration parameter defines the 'b' reference
    parameter of the UPBO reference PSD used to compute the
    upstream power back-off for the upstream band. A UPBO PSD
    defined for each band shall consist of two parameters [a, b].
    Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
    (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
    dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
    dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
    0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'

    expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
    xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
    a special configuration to disable UPBO in the respective
    upstream band.

    Parsed from file VDSL2-LINE-MIB.my.txt
    Company: None
    Module: VDSL2-LINE-MIB

    Description by cisco

    This configuration parameter defines the 'b' reference
    parameter of the UPBO reference PSD used to compute the
    upstream power back-off for the upstream band. A UPBO PSD
    defined for each band shall consist of two parameters [a, b].
    Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
    (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
    dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
    dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
    0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f'

    expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
    xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
    a special configuration to disable UPBO in the respective
    upstream band.

    Information by circitor

    xdsl2LConfProfUpboPsdB  OBJECT-TYPE
   SYNTAX      Integer32(0..4095)
   UNITS       "0.01 dBm/Hz"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
      "This configuration parameter defines the 'b' reference
       parameter of the UPBO reference PSD used to compute the
       upstream power back-off for the upstream band.  A UPBO PSD
       defined for each band shall consist of two parameters [a, b].
       Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
       (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
       dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
       dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
       0.01 dBm/Hz.  The UPBO reference PSD at the frequency 'f'

       expressed in MHz shall be equal to '-a-b(SQRT(f))'.  Setting
       xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
       a special configuration to disable UPBO in the respective
       upstream band."
   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
   DEFVAL      { 0 }
  ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }

    Information by cisco_v1

    xdsl2LConfProfUpboPsdB OBJECT-TYPE
    SYNTAX INTEGER(0..4095)


    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This configuration parameter defines the 'b' reference
         parameter of the UPBO reference PSD used to compute the
         upstream power back-off for the upstream band.  A UPBO PSD
         defined for each band shall consist of two parameters [a, b].
         Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
         (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
         dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
         dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
         0.01 dBm/Hz.  The UPBO reference PSD at the frequency 'f'
        
         expressed in MHz shall be equal to '-a-b(SQRT(f))'.  Setting
         xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
         a special configuration to disable UPBO in the respective
         upstream band."
    REFERENCE
        "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
    DEFVAL { 0 }
    ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }

    Information by oid_info

    Automatically extracted from RFC5650

    Information by mibdepot

    xdsl2LConfProfUpboPsdB  OBJECT-TYPE
   SYNTAX      Integer32(0..4095)
   UNITS       "0.01 dBm/Hz"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
      "This configuration parameter defines the 'b' reference
       parameter of the UPBO reference PSD used to compute the
       upstream power back-off for the upstream band.  A UPBO PSD
       defined for each band shall consist of two parameters [a, b].
       Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
       (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
       dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
       dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
       0.01 dBm/Hz.  The UPBO reference PSD at the frequency 'f'

       expressed in MHz shall be equal to '-a-b(SQRT(f))'.  Setting
       xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
       a special configuration to disable UPBO in the respective
       upstream band."
   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
   DEFVAL      { 0 }
  ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }

    Information by cisco

    xdsl2LConfProfUpboPsdB  OBJECT-TYPE
   SYNTAX      Integer32(0..4095)
   UNITS       "0.01 dBm/Hz"
   MAX-ACCESS  read-create
   STATUS      current
   DESCRIPTION
      "This configuration parameter defines the 'b' reference
       parameter of the UPBO reference PSD used to compute the
       upstream power back-off for the upstream band.  A UPBO PSD
       defined for each band shall consist of two parameters [a, b].
       Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
       (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of 0.01
       dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0
       dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of
       0.01 dBm/Hz.  The UPBO reference PSD at the frequency 'f'

       expressed in MHz shall be equal to '-a-b(SQRT(f))'.  Setting
       xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is
       a special configuration to disable UPBO in the respective
       upstream band."
   REFERENCE   "ITU-T G.997.1, paragraph #7.3.1.2.14 (UPBOPSD-pb)"
   DEFVAL      { 0 }
  ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (3)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.10.251.1.5.1.4.1.1 xdsl2LConfProfXdslBandUs 0 0 Each value identifies a specific band in the upstream
    transmission direction (excluding the US0 band).
    1.3.6.1.2.1.10.251.1.5.1.4.1.2 xdsl2LConfProfUpboPsdA 0 0 This configuration parameter defines the 'a' reference
    parameter of the UPBO reference PSD used to compute the
    upstream power bac…
    1.3.6.1.2.1.10.251.1.5.1.4.1.4 xdsl2LConfProfModeSpecBandUsRowStatus 0 0 This object is used to create a new row or to modify or
    delete an existing row in this table.

    This row is activated by setting th…