tripMIBReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for TRIP entities that
implement this MIB module in read only mode. Such TRIP
entities can then only be monitored, but not be
configured via this MIB module.
In read-only mode, the manager will not be able to add,
remove or modify rows to any table, however the TRIP
application may modify, remove or add rows to a table.
There is one INDEX object that cannot be represented in
the form of OBJECT clauses in SMIv2, but for which there
is a compliance requirement, expressed in OBJECT clause
form in this description:
-- OBJECT tripRouteTypeAddrInetType
-- SYNTAX InetAddressType (ipv4(1), ipv6(2),
-- ipv4z(3), ipv6z(4))
-- DESCRIPTION
-- This MIB requires support for global and
-- non-global ipv4 and ipv6 addresses.
--
-- OBJECT tripRouteTypeAddr
-- SYNTAX InetAddress (SIZE (4 | 8 | 16 | 20))
-- DESCRIPTION
-- This MIB requires support for global and
-- non-global IPv4 and IPv6 addresses.
--
"
MODULE -- this module
MANDATORY-GROUPS { tripConfigGroup,
tripPeerTableConfigGroup,
tripRouteGroup,
tripItadTopologyGroup,
tripPeerTableStatsGroup }
GROUP tripNotificationGroup
DESCRIPTION
"This group is OPTIONAL. A TRIP entity can choose not to
send any notifications. If this group is implemented,
the tripNotifObjectGroup MUST also be implemented."
GROUP tripNotifObjectGroup
DESCRIPTION
"This group is OPTIONAL. A TRIP entity can choose not to
send any notifications. If this group is implemented,
the tripNotificationGroup MUST also be implemented."
OBJECT tripCfgItad
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripCfgAdminStatus
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when implemented in read-only mode."
OBJECT tripCfgPort
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripCfgMinItadOriginationInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripCfgMinRouteAdvertisementInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripCfgMaxPurgeTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripCfgDisableTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripCfgStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripSupportedCommunityItad
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripSupportedCommunityStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripSupportedCommunityRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only
status that needs to be supported."
OBJECT tripPeerAdminStatus
MIN-ACCESS not-accessible
DESCRIPTION
"Object is not needed when implemented in read-only mode."
OBJECT tripPeerConnectRetryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerMaxRetryInterval
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerHoldTimeConfigured
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerKeepAliveConfigured
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerMaxPurgeTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerDisableTime
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerStorage
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT tripPeerRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and active is the only
status that needs to be supported."
MODULE NETWORK-SERVICES-MIB
MANDATORY-GROUPS { applRFC2788Group }
View at oid-info.com
The compliance statement for TRIP entities that
implement this MIB module in read only mode. Such TRIP
entities can then only be monitored, but not be
configured via this MIB module.
In read-only mode, the manager will not be able to add,
remove or modify rows to any table, however the TRIP
application may modify, remove or add rows to a table.
There is one INDEX object that cannot be represented in
the form of OBJECT clauses in SMIv2, but for which there
is a compliance requirement, expressed in OBJECT clause
form in this description:
Parsed from file rfc3872-Telephony-Routing-over-IP-TRIP.mib-2.txt
Company: None
Module: TRIP-MIB
The compliance statement for TRIP entities that
implement this MIB module in read only mode. Such TRIP
entities can then only be monitored, but not be
configured via this MIB module.
In read-only mode, the manager will not be able to add,
remove or modify rows to any table, however the TRIP
application may modify, remove or add rows to a table.
There is one INDEX object that cannot be represented in
the form of OBJECT clauses in SMIv2, but for which there
is a compliance requirement, expressed in OBJECT clause
form in this description:
Parsed from file TRIP-MIB.mib
Module: TRIP-MIB
Automatically extracted from RFC3872
tripMIBReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for TRIP entities that implement this MIB module in read only mode. Such TRIP entities can then only be monitored, but not be configured via this MIB module. In read-only mode, the manager will not be able to add, remove or modify rows to any table, however the TRIP application may modify, remove or add rows to a table. There is one INDEX object that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there is a compliance requirement, expressed in OBJECT clause form in this description: " MODULE MANDATORY-GROUPS { tripConfigGroup, tripPeerTableConfigGroup, tripRouteGroup, tripItadTopologyGroup, tripPeerTableStatsGroup } GROUP tripNotificationGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotifObjectGroup MUST also be implemented." GROUP tripNotifObjectGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotificationGroup MUST also be implemented." OBJECT tripCfgItad MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgAdminStatus MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when implemented in read-only mode." OBJECT tripCfgPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMinItadOriginationInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMinRouteAdvertisementInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMaxPurgeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgDisableTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityItad MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT tripPeerAdminStatus MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when implemented in read-only mode." OBJECT tripPeerConnectRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerMaxRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerHoldTimeConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerKeepAliveConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerMaxPurgeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerDisableTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." MODULE NETWORK-SERVICES-MIB MANDATORY-GROUPS { applRFC2788Group } ::= { tripMIBCompliances 2 }
tripMIBReadOnlyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for TRIP entities that implement this MIB module in read only mode. Such TRIP entities can then only be monitored, but not be configured via this MIB module. In read-only mode, the manager will not be able to add, remove or modify rows to any table, however the TRIP application may modify, remove or add rows to a table. There is one INDEX object that cannot be represented in the form of OBJECT clauses in SMIv2, but for which there is a compliance requirement, expressed in OBJECT clause form in this description: " MODULE MANDATORY-GROUPS { tripConfigGroup, tripPeerTableConfigGroup, tripRouteGroup, tripItadTopologyGroup, tripPeerTableStatsGroup } GROUP tripNotificationGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotifObjectGroup MUST also be implemented." GROUP tripNotifObjectGroup DESCRIPTION "This group is OPTIONAL. A TRIP entity can choose not to send any notifications. If this group is implemented, the tripNotificationGroup MUST also be implemented." OBJECT tripCfgItad MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgAdminStatus MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when implemented in read-only mode." OBJECT tripCfgPort MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMinItadOriginationInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMinRouteAdvertisementInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgMaxPurgeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgDisableTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripCfgStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityItad MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripSupportedCommunityRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." OBJECT tripPeerAdminStatus MIN-ACCESS not-accessible DESCRIPTION "Object is not needed when implemented in read-only mode." OBJECT tripPeerConnectRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerMaxRetryInterval MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerHoldTimeConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerKeepAliveConfigured MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerMaxPurgeTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerDisableTime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerStorage MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT tripPeerRowStatus SYNTAX RowStatus { active(1) } MIN-ACCESS read-only DESCRIPTION "Write access is not required, and active is the only status that needs to be supported." MODULE NETWORK-SERVICES-MIB MANDATORY-GROUPS { applRFC2788Group } ::= { tripMIBCompliances 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.116.2.1.1 | tripMIBFullCompliance | 0 | 0 | The compliance statement for TRIP entities that implement this MIB module in read-write mode, such that it can be used for both m… |