This is a configured set of administrative groups
specified as a bit vector (i.e., bit n is 1 if group
n is in the set, where n = 0 is the LSB). For each
link that this path goes through, the link must have
at least one of the groups specified in IncludeAny
to be acceptable. If IncludeAny is zero, all links
are acceptable.
Parsed from file TE-MIB.mib
Module: TE-MIB
Vendor: IETF RFCs
Module: TE-MIB (rfc3970-Traffic-Engineering-TE.mib)
Type: TABULAR
Access: read-create
Syntax: Unsigned32
Automatically extracted from www.mibdepot.com
tePathIncludeAny OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This is a configured set of administrative groups specified as a bit vector (i.e., bit n is 1 if group n is in the set, where n = 0 is the LSB). For each link that this path goes through, the link must have at least one of the groups specified in IncludeAny to be acceptable. If IncludeAny is zero, all links are acceptable. " DEFVAL { 0 } ::= { tePathEntry 8 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.122.1.3.1.1 | tePathIndex, teAdminGroupNumber | 0 | 0 | Index of the administrative group. |
| 1.3.6.1.2.1.122.1.3.1.2 | tePathName, teAdminGroupName | 0 | 0 | Name of the administrative group. |
| 1.3.6.1.2.1.122.1.3.1.3 | tePathRowStatus, teAdminGroupRowStatus | 0 | 0 | The status of this conceptual row. The value of this object has no effect on whether other objects in this conceptual row can be m… |
| 1.3.6.1.2.1.122.1.3.1.4 | tePathStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
| 1.3.6.1.2.1.122.1.3.1.5 | tePathType | 0 | 0 | tePathtype |
| 1.3.6.1.2.1.122.1.3.1.6 | tePathConfiguredRoute | 0 | 0 | The route that this TE path is configured to follow; i.e., an ordered list of hops. The value of this object gives the primary i… |
| 1.3.6.1.2.1.122.1.3.1.7 | tePathBandwidth | 0 | 0 | The configured bandwidth for this Tunnel, in units of thousands of bits per second (Kbps). |
| 1.3.6.1.2.1.122.1.3.1.9 | tePathIncludeAll | 0 | 0 | This is a configured set of administrative groups specified as a bit vector (i.e., bit n is 1 if group n is in the set, where n =… |
| 1.3.6.1.2.1.122.1.3.1.10 | tePathExclude | 0 | 0 | This is a configured set of administrative groups specified as a bit vector (i.e., bit n is 1 if group n is in the set, where n =… |
| 1.3.6.1.2.1.122.1.3.1.11 | tePathSetupPriority | 0 | 0 | The setup priority configured for this path, with 0 as the highest priority and 7 as the lowest. |
| 1.3.6.1.2.1.122.1.3.1.12 | tePathHoldPriority | 0 | 0 | The hold priority configured for this path, with 0 as the highest priority and 7 as the lowest. |
| 1.3.6.1.2.1.122.1.3.1.13 | tePathProperties | 0 | 0 | The set of configured properties for this path, expressed as a bit map. For example, if the path supports 'make before break', t… |
| 1.3.6.1.2.1.122.1.3.1.14 | tePathOperStatus | 0 | 0 | The operational status of the path: unknown: down: Signaling failed. testing: Administratively set aside for testing. do… |
| 1.3.6.1.2.1.122.1.3.1.15 | tePathAdminStatus | 0 | 0 | The operational status of the path: normal: Used normally for forwarding. testing: Administratively set aside for testin… |
| 1.3.6.1.2.1.122.1.3.1.16 | tePathComputedRoute | 0 | 0 | The route computed for this path, perhaps using some form of Constraint-based Routing. The algorithm is implementation dependent… |
| 1.3.6.1.2.1.122.1.3.1.17 | tePathRecordedRoute | 0 | 0 | The route actually used for this path, as recorded by the signaling protocol. This is again an ordered list of hops; each hop is… |