This object specifies the last IP address of the range of
IP addresses being mapped to. If only a single address is
being mapped to, the value of this object is equal to the
value of natAddrMapGlobalAddrFrom. For a static NAT, the
number of addresses in the range defined by
natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be
equal to the number of addresses in the range defined by
natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo.
The value of this object must be greater than or equal to
the value of the natAddrMapGlobalAddrFrom object.
The type of this address is determined by the value of
the natAddrMapGlobalAddrType object.
Parsed from file NAT-MIB.mib
Module: NAT-MIB
natAddrMapGlobalAddrTo OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the last IP address of the range of
IP addresses being mapped to. If only a single address is
being mapped to, the value of this object is equal to the
value of natAddrMapGlobalAddrFrom. For a static NAT, the
number of addresses in the range defined by
natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be
equal to the number of addresses in the range defined by
natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo.
The value of this object must be greater than or equal to
the value of the natAddrMapGlobalAddrFrom object.
The type of this address is determined by the value of
the natAddrMapGlobalAddrType object."
View at oid-info.com
This object specifies the last IP address of the range of
IP addresses being mapped to. If only a single address is
being mapped to, the value of this object is equal to the
value of natAddrMapGlobalAddrFrom. For a static NAT, the
number of addresses in the range defined by
natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be
equal to the number of addresses in the range defined by
natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo.
The value of this object must be greater than or equal to
the value of the natAddrMapGlobalAddrFrom object.
The type of this address is determined by the value of
the natAddrMapGlobalAddrType object.
Parsed from file tiaranet-nat.mib.txt
Company: None
Module: NAT-MIB
This object specifies the last IP address of the range
of IP addresses being mapped to. If only a single
address is being mapped to, the value of this object is
equal to the value of natAddrMapGlobalAddrFrom. For a
static NAT, the number of addresses in the range defined
by natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo
must be equal to the number of addresses in the range
defined by natAddrMapLocalAddrFrom and
natAddrMapLocalAddrTo. The value of this object must be
greater than or equal to the value of the
natAddrMapGlobalAddrFrom object.
The type of this address is determined by the value of
the natAddrMapGlobalAddrType object.
natAddrMapGlobalAddrTo OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the last IP address of the range of IP addresses being mapped to. If only a single address is being mapped to, the value of this object is equal to the value of natAddrMapGlobalAddrFrom. For a static NAT, the number of addresses in the range defined by natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be equal to the number of addresses in the range defined by natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. The value of this object must be greater than or equal to the value of the natAddrMapGlobalAddrFrom object. The type of this address is determined by the value of the natAddrMapGlobalAddrType object." ::= { natAddrMapEntry 12 }
Automatically extracted from RFC4008
natAddrMapGlobalAddrTo OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object specifies the last IP address of the range of IP addresses being mapped to. If only a single address is being mapped to, the value of this object is equal to the value of natAddrMapGlobalAddrFrom. For a static NAT, the number of addresses in the range defined by natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be equal to the number of addresses in the range defined by natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. The value of this object must be greater than or equal to the value of the natAddrMapGlobalAddrFrom object. The type of this address is determined by the value of the natAddrMapGlobalAddrType object." ::= { natAddrMapEntry 12 }
natAddrMapGlobalAddrTo OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object specifies the last IP address of the range of IP addresses being mapped to. If only a single address is being mapped to, the value of this object is equal to the value of natAddrMapGlobalAddrFrom. For a static NAT, the number of addresses in the range defined by natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo must be equal to the number of addresses in the range defined by natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. The value of this object must be greater than or equal to the value of the natAddrMapGlobalAddrFrom object. The type of this address is determined by the value of the natAddrMapGlobalAddrType object." ::= { natAddrMapEntry 12 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.123.1.4.1.1 | natAddrMapIndex | 0 | 0 | Along with ifIndex, this object uniquely identifies an entry in the natAddrMapTable. Address map entries are applied in the order… |
1.3.6.1.2.1.123.1.4.1.2 | natAddrMapName | 0 | 0 | Name identifying all map entries in the table associated with the same interface. All map entries with the same ifIndex MUST hav… |
1.3.6.1.2.1.123.1.4.1.3 | natAddrMapEntryType | 0 | 0 | This parameter can be used to set up static or dynamic address maps. |
1.3.6.1.2.1.123.1.4.1.4 | natAddrMapTranslationEntity | 0 | 0 | The end-point entity (source or destination) in inbound or outbound sessions (i.e., first packets) that may be translated by an a… |
1.3.6.1.2.1.123.1.4.1.5 | natAddrMapLocalAddrType | 0 | 0 | This object specifies the address type used for natAddrMapLocalAddrFrom and natAddrMapLocalAddrTo. |
1.3.6.1.2.1.123.1.4.1.6 | natAddrMapLocalAddrFrom | 0 | 0 | This object specifies the first IP address of the range of IP addresses mapped by this translation entry. The value of this obje… |
1.3.6.1.2.1.123.1.4.1.7 | natAddrMapLocalAddrTo | 0 | 0 | This object specifies the last IP address of the range of IP addresses mapped by this translation entry. If only a single addres… |
1.3.6.1.2.1.123.1.4.1.8 | natAddrMapLocalPortFrom | 0 | 0 | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row… |
1.3.6.1.2.1.123.1.4.1.9 | natAddrMapLocalPortTo | 0 | 0 | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row… |
1.3.6.1.2.1.123.1.4.1.10 | natAddrMapGlobalAddrType | 0 | 0 | This object specifies the address type used for natAddrMapGlobalAddrFrom and natAddrMapGlobalAddrTo. |
1.3.6.1.2.1.123.1.4.1.11 | natAddrMapGlobalAddrFrom | 0 | 0 | This object specifies the first IP address of the range of IP addresses being mapped to. The value of this object must be less t… |
1.3.6.1.2.1.123.1.4.1.13 | natAddrMapGlobalPortFrom | 0 | 0 | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row… |
1.3.6.1.2.1.123.1.4.1.14 | natAddrMapGlobalPortTo | 0 | 0 | If this conceptual row describes a Basic NAT address mapping, then the value of this object must be zero. If this conceptual row… |
1.3.6.1.2.1.123.1.4.1.15 | natAddrMapProtocol | 0 | 0 | This object specifies a bitmap of protocol identifiers. |
1.3.6.1.2.1.123.1.4.1.16 | natAddrMapInTranslates | 0 | 0 | The number of inbound packets pertaining to this address map entry that were translated. Discontinuities in the value of this cou… |
1.3.6.1.2.1.123.1.4.1.17 | natAddrMapOutTranslates | 0 | 0 | The number of outbound packets pertaining to this address map entry that were translated. Discontinuities in the value of this co… |
1.3.6.1.2.1.123.1.4.1.18 | natAddrMapDiscards | 0 | 0 | The number of packets pertaining to this address map entry that were dropped due to lack of addresses in the address pool identif… |
1.3.6.1.2.1.123.1.4.1.19 | natAddrMapAddrUsed | 0 | 0 | The number of addresses pertaining to this address map that are currently being used from the NAT pool. The value of this object … |
1.3.6.1.2.1.123.1.4.1.20 | natAddrMapStorageType | 0 | 0 | The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columna… |
1.3.6.1.2.1.123.1.4.1.21 | natAddrMapRowStatus | 0 | 0 | The status of this conceptual row. Until instances of all corresponding columns are appropriately configured, the value of the cor… |