natv2PoolThresholdUsageLow OBJECT-TYPE
SYNTAX Integer32 (-1|0..100)
UNITS "Percent"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Threshold for reporting low utilization of the address pool.
Utilization at a given instant is calculated as the
percentage of ports allocated in port map entries for the
most-used protocol at that instant. If utilization is less
than or equal to natv2PoolThresholdUsageLow, an instance of
natv2NotificationPoolUsageLow may be triggered, unless
disabled by setting it to -1. Note the difference from the
disabling setting for other notifications. Reporting is
subject to the per-pool notification interval given by
natv2PoolNotificationInterval. If multiple notifications are
triggered during one interval, the agent MUST report only
the one with the lowest value of
natv2PoolNotifiedPortMapEntries and discard the others.
Implementation note: the percentage specified by this object
can be converted to a number of port map entries at
configuration time (after port and address ranges have been
configured or reconfigured) and compared to the current
value of natv2PoolNotifiedPortMapEntries."
REFERENCE
"RFC yyyy Section 3.1.2 and Section 3.3.6."
DEFVAL { -1 }
View at oid-info.com
Automatically extracted from draft-perrault-behave-natv2-mib-05.
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.123.2.3.1.2 | natv2PoolIndex | 0 | 0 | natv2PoolIndex OBJECT-TYPE SYNTAX Natv2PoolIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of an address pool… |
| 1.3.6.1.2.1.123.2.3.1.3 | natv2PoolRealm | 0 | 0 | natv2PoolRealm OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Address realm… |
| 1.3.6.1.2.1.123.2.3.1.4 | natv2PoolAddressType | 0 | 0 | natv2PoolAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "Address type supplie… |
| 1.3.6.1.2.1.123.2.3.1.5 | natv2PoolMinimumPort | 0 | 0 | natv2PoolMinimumPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum port number o… |
| 1.3.6.1.2.1.123.2.3.1.6 | natv2PoolMaximumPort | 0 | 0 | natv2PoolMaximumPort OBJECT-TYPE SYNTAX InetPortNumber MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum port number o… |
| 1.3.6.1.2.1.123.2.3.1.7 | natv2PoolAddressMapEntries | 0 | 0 | natv2PoolAddressMapEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of… |
| 1.3.6.1.2.1.123.2.3.1.8 | natv2PoolPortMapEntries | 0 | 0 | natv2PoolPortMapEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of en… |
| 1.3.6.1.2.1.123.2.3.1.9 | natv2PoolAddressMapCreations | 0 | 0 | natv2PoolAddressMapCreations OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current Perreault, et al. Expires Decembe… |
| 1.3.6.1.2.1.123.2.3.1.10 | natv2PoolPortMapCreations | 0 | 0 | natv2PoolPortMapCreations OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number o… |
| 1.3.6.1.2.1.123.2.3.1.11 | natv2PoolAddressMapFailureDrops | 0 | 0 | natv2PoolAddressMapFailureDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative nu… |
| 1.3.6.1.2.1.123.2.3.1.12 | natv2PoolPortMapFailureDrops | 0 | 0 | natv2PoolPortMapFailureDrops OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative numbe… |
| 1.3.6.1.2.1.123.2.3.1.13 | natv2PoolDiscontinuityTime | 0 | 0 | natv2PoolDiscontinuityTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current Perreault, et al. Expires December … |
| 1.3.6.1.2.1.123.2.3.1.15 | natv2PoolThresholdUsageHigh | 0 | 0 | natv2PoolThresholdUsageHigh OBJECT-TYPE SYNTAX Integer32 (-1|0..100) UNITS "Percent" MAX-ACCESS read-write STATUS current DESCR… |
| 1.3.6.1.2.1.123.2.3.1.16 | natv2PoolNotifiedPortMapEntries | 0 | 0 | natv2PoolNotifiedPortMapEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Numb… |
| 1.3.6.1.2.1.123.2.3.1.17 | natv2PoolNotifiedPortMapProtocol | 0 | 0 | natv2PoolNotifiedPortMapProtocol OBJECT-TYPE SYNTAX ProtocolNumber MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION … |
| 1.3.6.1.2.1.123.2.3.1.18 | natv2PoolNotificationInterval | 0 | 0 | natv2PoolNotificationInterval OBJECT-TYPE Perreault, et al. Expires December 18, 2015 [Page 56] SYNTAX Unsigned32 (1..3600) UNI… |