docsSubMgtBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for CMTS devices that implement
CMTS centric subscriber management.
This compliance statement applies to implementations that
support DOCSIS 1.0/1.1/2.0, which are not IPv6 capable."
MODULE DIFFSERV-MIB -- RFC3289
MANDATORY-GROUPS {
diffServMIBDataPathGroup,
diffServMIBClfrGroup,
diffServMIBClfrElementGroup,
diffServMIBMultiFieldClfrGroup,
diffServMIBActionGroup,
diffServMIBAlgDropGroup,
diffServMIBCounterGroup
}
OBJECT diffServDataPathStatus -- same as RFC3289
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServClfrStatus -- same as RFC3289
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServClfrElementStatus -- same as RFC3289
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServMultiFieldClfrAddrType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
OBJECT diffServMultiFieldClfrSrcAddr
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
OBJECT diffServMultiFieldClfrDstAddr
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
OBJECT diffServAlgDropStatus -- same as RFC3289
SYNTAX RowStatus { active(1) }
WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
DESCRIPTION
"Support for createAndWait and notInService is not required."
OBJECT diffServDataPathStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServClfrStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServClfrElementStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServMultiFieldClfrStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServActionStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServCountActStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServAlgDropStorage
SYNTAX StorageType { nonVolatile(3) }
DESCRIPTION
"An implementation is only required to support nonvolatile
storage."
OBJECT diffServAlgDropType
SYNTAX INTEGER { alwaysDrop(5) }
DESCRIPTION
"For DOCSIS subscriber management, this object is
only used to provide packet filtering. Implementations
need not support other values of this enumeration."
MODULE -- This module i.e., DOCS-IETF-SUBMGT-MIB
MANDATORY-GROUPS {
docsSubMgtGroup
}
OBJECT docsSubMgtCpeControlMaxCpeIp
SYNTAX Integer32(0..16)
DESCRIPTION
"An implementation is only required to support up to
sixteen addresses per modem."
OBJECT docsSubMgtCpeMaxIpDefault
SYNTAX Integer32(0..16)
DESCRIPTION
"An implementation is only required to support up to
sixteen addresses per modem."
OBJECT docsSubMgtCpeIpAddressType
SYNTAX InetAddressType { ipv4(1) }
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
OBJECT docsSubMgtCpeIpAddr
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
"An implementation is only required to support IPv4
addresses."
OBJECT docsSubMgtCmFilterSubDownstream
SYNTAX Integer32(0..30)
DESCRIPTION
"An implementation is only required to support thirty
filter groups."
OBJECT docsSubMgtCmFilterSubUpstream
SYNTAX Integer32(0..30)
DESCRIPTION
"An implementation is only required to support thirty
filter groups."
OBJECT docsSubMgtCmFilterCmDownstream
SYNTAX Integer32(0..30)
DESCRIPTION
"An implementation is only required to support thirty
filter groups."
OBJECT docsSubMgtCmFilterCmUpstream
SYNTAX Integer32(0..30)
DESCRIPTION
"An implementation is only required to support thirty
filter groups."
View at oid-info.com
The compliance statement for CMTS devices that implement
CMTS centric subscriber management.
This compliance statement applies to implementations that
support DOCSIS 1.0/1.1/2.0, which are not IPv6 capable.
Parsed from file rfc4036-DOCSIS-Cable-Modem-Termination-Systems.mib.txt
Company: None
Module: DOCS-IETF-SUBMGT-MIB
The compliance statement for CMTS devices that implement
CMTS centric subscriber management.
This compliance statement applies to implementations that
support DOCSIS 1.0/1.1/2.0, which are not IPv6 capable.
Parsed from file DOCS-IETF-SUBMGT-MIB.mib
Module: DOCS-IETF-SUBMGT-MIB
Automatically extracted from RFC4036
docsSubMgtBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for CMTS devices that implement CMTS centric subscriber management. This compliance statement applies to implementations that support DOCSIS 1.0/1.1/2.0, which are not IPv6 capable." MODULE DIFFSERV-MIB MANDATORY-GROUPS { diffServMIBDataPathGroup, diffServMIBClfrGroup, diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup, diffServMIBActionGroup, diffServMIBAlgDropGroup, diffServMIBCounterGroup } OBJECT diffServDataPathStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServClfrStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServClfrElementStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServMultiFieldClfrAddrType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT diffServMultiFieldClfrSrcAddr SYNTAX InetAddress (SIZE(4)) DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT diffServMultiFieldClfrDstAddr SYNTAX InetAddress (SIZE(4)) DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT diffServAlgDropStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServDataPathStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServClfrStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServClfrElementStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServMultiFieldClfrStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServActionStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServCountActStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServAlgDropStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServAlgDropType SYNTAX INTEGER { alwaysDrop(5) } DESCRIPTION "For DOCSIS subscriber management, this object is only used to provide packet filtering. Implementations need not support other values of this enumeration." MODULE MANDATORY-GROUPS { docsSubMgtGroup } OBJECT docsSubMgtCpeControlMaxCpeIp SYNTAX Integer32(0..16) DESCRIPTION "An implementation is only required to support up to sixteen addresses per modem." OBJECT docsSubMgtCpeMaxIpDefault SYNTAX Integer32(0..16) DESCRIPTION "An implementation is only required to support up to sixteen addresses per modem." OBJECT docsSubMgtCpeIpAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT docsSubMgtCpeIpAddr SYNTAX InetAddress (SIZE(4)) DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT docsSubMgtCmFilterSubDownstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." OBJECT docsSubMgtCmFilterSubUpstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." OBJECT docsSubMgtCmFilterCmDownstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." OBJECT docsSubMgtCmFilterCmUpstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." ::= { docsSubMgtCompliances 1 }
docsSubMgtBasicCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for CMTS devices that implement CMTS centric subscriber management. This compliance statement applies to implementations that support DOCSIS 1.0/1.1/2.0, which are not IPv6 capable." MODULE DIFFSERV-MIB MANDATORY-GROUPS { diffServMIBDataPathGroup, diffServMIBClfrGroup, diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup, diffServMIBActionGroup, diffServMIBAlgDropGroup, diffServMIBCounterGroup } OBJECT diffServDataPathStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServClfrStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServClfrElementStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServMultiFieldClfrAddrType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT diffServMultiFieldClfrSrcAddr SYNTAX InetAddress (SIZE(4)) DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT diffServMultiFieldClfrDstAddr SYNTAX InetAddress (SIZE(4)) DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT diffServAlgDropStatus SYNTAX RowStatus { active(1) } WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } DESCRIPTION "Support for createAndWait and notInService is not required." OBJECT diffServDataPathStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServClfrStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServClfrElementStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServMultiFieldClfrStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServActionStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServCountActStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServAlgDropStorage SYNTAX StorageType { nonVolatile(3) } DESCRIPTION "An implementation is only required to support nonvolatile storage." OBJECT diffServAlgDropType SYNTAX INTEGER { alwaysDrop(5) } DESCRIPTION "For DOCSIS subscriber management, this object is only used to provide packet filtering. Implementations need not support other values of this enumeration." MODULE MANDATORY-GROUPS { docsSubMgtGroup } OBJECT docsSubMgtCpeControlMaxCpeIp SYNTAX Integer32(0..16) DESCRIPTION "An implementation is only required to support up to sixteen addresses per modem." OBJECT docsSubMgtCpeMaxIpDefault SYNTAX Integer32(0..16) DESCRIPTION "An implementation is only required to support up to sixteen addresses per modem." OBJECT docsSubMgtCpeIpAddressType SYNTAX InetAddressType { ipv4(1) } DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT docsSubMgtCpeIpAddr SYNTAX InetAddress (SIZE(4)) DESCRIPTION "An implementation is only required to support IPv4 addresses." OBJECT docsSubMgtCmFilterSubDownstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." OBJECT docsSubMgtCmFilterSubUpstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." OBJECT docsSubMgtCmFilterCmDownstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." OBJECT docsSubMgtCmFilterCmUpstream SYNTAX Integer32(0..30) DESCRIPTION "An implementation is only required to support thirty filter groups." ::= { docsSubMgtCompliances 1 }