Reference record for OID 1.3.6.1.2.1.127.1.10.1.2


parent
1.3.6.1.2.1.127.1.10.1 (docsIetfQosPHSEntry)
node code
2
node name
docsIetfQosPHSMask
dot oid
1.3.6.1.2.1.127.1.10.1.2
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsIetfQosMIB(127) docsIetfQosMIBObjects(1) docsIetfQosPHSTable(10) docsIetfQosPHSEntry(1) docsIetfQosPHSMask(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsIetfQosMIB(127) docsIetfQosMIBObjects(1) docsIetfQosPHSTable(10) docsIetfQosPHSEntry(1) docsIetfQosPHSMask(2)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) docsIetfQosMIB(127) docsIetfQosMIBObjects(1) docsIetfQosPHSTable(10) docsIetfQosPHSEntry(1) docsIetfQosPHSMask(2)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) docsIetfQosMIB(127) docsIetfQosMIBObjects(1) docsIetfQosPHSTable(10) docsIetfQosPHSEntry(1) docsIetfQosPHSMask(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsIetfQosMIB(127) docsIetfQosMIBObjects(1) docsIetfQosPHSTable(10) docsIetfQosPHSEntry(1) docsIetfQosPHSMask(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsIetfQosMIB(127) docsIetfQosMIBObjects(1) docsIetfQosPHSTable(10) docsIetfQosPHSEntry(1) docsIetfQosPHSMask(2)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/docsIetfQosMIB/docsIetfQosMIBObjects/docsIetfQosPHSTable/docsIetfQosPHSEntry/docsIetfQosPHSMask
  • /iso/identified-organization/dod/internet/mgmt/mib/docsIetfQosMIB/docsIetfQosMIBObjects/docsIetfQosPHSTable/docsIetfQosPHSEntry/docsIetfQosPHSMask
  • /iso/org/dod/internet/mgmt/mib-2/docsIetfQosMIB/docsIetfQosMIBObjects/docsIetfQosPHSTable/docsIetfQosPHSEntry/docsIetfQosPHSMask
  • /iso/org/dod/internet/mgmt/mib/docsIetfQosMIB/docsIetfQosMIBObjects/docsIetfQosPHSTable/docsIetfQosPHSEntry/docsIetfQosPHSMask
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/docsIetfQosMIB/docsIetfQosMIBObjects/docsIetfQosPHSTable/docsIetfQosPHSEntry/docsIetfQosPHSMask
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/docsIetfQosMIB/docsIetfQosMIBObjects/docsIetfQosPHSTable/docsIetfQosPHSEntry/docsIetfQosPHSMask
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/127/1/10/1/2

    Description by circitor

    Payload header suppression mask defines the
    bit mask that is used in combination with the
    docsIetfQosPHSField. It defines which bytes in
    the header must be suppressed/restored by the
    sending or receiving device.

    Each bit of this bit mask corresponds to a byte
    in the docsIetfQosPHSField, with the least



    significant bit corresponding to the first byte
    of the docsIetfQosPHSField.

    Each bit of the bit mask specifies whether
    the corresponding byte should be suppressed
    in the packet. A bit value of '1' indicates that
    the byte should be suppressed by the sending
    device and restored by the receiving device.
    A bit value of '0' indicates that
    the byte should not be suppressed by the sending
    device or restored by the receiving device.

    If the bit mask does not contain a bit for each
    byte in the docsIetfQosPHSField, then the bit mask
    is extended with bit values of '1' to be the
    necessary length.

    Parsed from file DOCS-IETF-QOS-MIB.mib
    Module: DOCS-IETF-QOS-MIB

    Description by cisco_v1

    Payload header suppression mask defines the
    bit mask that is used in combination with the
    docsIetfQosPHSField. It defines which bytes in
    the header must be suppressed/restored by the
    sending or receiving device.

    Each bit of this bit mask corresponds to a byte
    in the docsIetfQosPHSField, with the least
    significant bit corresponding to the first byte
    of the docsIetfQosPHSField.

    Each bit of the bit mask specifies whether
    the corresponding byte should be suppressed
    in the packet. A bit value of '1' indicates that
    the byte should be suppressed by the sending
    device and restored by the receiving device.
    A bit value of '0' indicates that
    the byte should not be suppressed by the sending
    device or restored by the receiving device.

    If the bit mask does not contain a bit for each
    byte in the docsIetfQosPHSField, then the bit mask
    is extended with bit values of '1' to be the
    necessary length.

    Description by mibdepot

    Payload header suppression mask defines the
    bit mask that is used in combination with the
    docsIetfQosPHSField. It defines which bytes in
    the header must be suppressed/restored by the
    sending or receiving device.

    Each bit of this bit mask corresponds to a byte
    in the docsIetfQosPHSField, with the least
    significant bit corresponding to the first byte
    of the docsIetfQosPHSField.

    Each bit of the bit mask specifies whether
    the corresponding byte should be suppressed
    in the packet. A bit value of '1' indicates that
    the byte should be suppressed by the sending
    device and restored by the receiving device.
    A bit value of '0' indicates that
    the byte should not be suppressed by the sending
    device or restored by the receiving device.

    If the bit mask does not contain a bit for each
    byte in the docsIetfQosPHSField, then the bit mask
    is extended with bit values of '1' to be the
    necessary length.

    Parsed from file rfc4323-IPCDN-DOCSIS-QoS.mib.txt
    Company: None
    Module: DOCS-IETF-QOS-MIB

    Description by cisco

    Payload header suppression mask defines the
    bit mask that is used in combination with the
    docsIetfQosPHSField. It defines which bytes in
    the header must be suppressed/restored by the
    sending or receiving device.

    Each bit of this bit mask corresponds to a byte
    in the docsIetfQosPHSField, with the least
    significant bit corresponding to the first byte
    of the docsIetfQosPHSField.

    Each bit of the bit mask specifies whether
    the corresponding byte should be suppressed
    in the packet. A bit value of '1' indicates that
    the byte should be suppressed by the sending
    device and restored by the receiving device.
    A bit value of '0' indicates that
    the byte should not be suppressed by the sending
    device or restored by the receiving device.

    If the bit mask does not contain a bit for each
    byte in the docsIetfQosPHSField, then the bit mask
    is extended with bit values of '1' to be the
    necessary length.

    Information by circitor

    docsIetfQosPHSMask          OBJECT-TYPE
    SYNTAX          OCTET STRING(SIZE(0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION    "Payload header suppression mask defines the
                    bit mask that is used in combination with the
                    docsIetfQosPHSField.  It defines which bytes in
                    the header must be suppressed/restored by the
                    sending or receiving device.

                    Each bit of this bit mask corresponds to a byte
                    in the docsIetfQosPHSField, with the least



                    significant bit corresponding to the first byte
                    of the docsIetfQosPHSField.

                    Each bit of the bit mask specifies whether
                    the corresponding byte should be suppressed
                    in the packet.  A bit value of '1' indicates that
                    the byte should be suppressed by the sending
                    device and restored by the receiving device.
                    A bit value of '0' indicates that
                    the byte should not be suppressed by the sending
                    device or restored by the receiving device.

                    If the bit mask does not contain a bit for each
                    byte in the docsIetfQosPHSField, then the bit mask
                    is extended with bit values of '1' to be the
                    necessary length."
    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.3"
    ::= { docsIetfQosPHSEntry 2 }

    Information by cisco_v1

    docsIetfQosPHSMask OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(0..32))
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Payload header suppression mask defines the
         bit mask that is used in combination with the
         docsIetfQosPHSField.  It defines which bytes in
         the header must be suppressed/restored by the
         sending or receiving device.
        
         Each bit of this bit mask corresponds to a byte
         in the docsIetfQosPHSField, with the least
         significant bit corresponding to the first byte
         of the docsIetfQosPHSField.
        
         Each bit of the bit mask specifies whether
         the corresponding byte should be suppressed
         in the packet.  A bit value of '1' indicates that
         the byte should be suppressed by the sending
         device and restored by the receiving device.
         A bit value of '0' indicates that
         the byte should not be suppressed by the sending
         device or restored by the receiving device.
        
         If the bit mask does not contain a bit for each
         byte in the docsIetfQosPHSField, then the bit mask
         is extended with bit values of '1' to be the
         necessary length."
    REFERENCE
        "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.3"
    ::= { docsIetfQosPHSEntry 2 }

    Information by oid_info

    Vendor: Cisco Systems
    Module: DOCS-IETF-QOS-MIB (DOCS-IETF-QOS-MIB-V1SMI.my)
    Type: TABULAR
    Access: read-only
    Syntax: OCTET STRING
    ( SIZE (
    0..32 ) )

    Automatically extracted from www.mibdepot.com

    Information by mibdepot

    docsIetfQosPHSMask          OBJECT-TYPE
    SYNTAX          OCTET STRING(SIZE(0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION    "Payload header suppression mask defines the
                    bit mask that is used in combination with the
                    docsIetfQosPHSField.  It defines which bytes in
                    the header must be suppressed/restored by the
                    sending or receiving device.

                    Each bit of this bit mask corresponds to a byte
                    in the docsIetfQosPHSField, with the least
                    significant bit corresponding to the first byte
                    of the docsIetfQosPHSField.

                    Each bit of the bit mask specifies whether
                    the corresponding byte should be suppressed
                    in the packet.  A bit value of '1' indicates that
                    the byte should be suppressed by the sending
                    device and restored by the receiving device.
                    A bit value of '0' indicates that
                    the byte should not be suppressed by the sending
                    device or restored by the receiving device.

                    If the bit mask does not contain a bit for each
                    byte in the docsIetfQosPHSField, then the bit mask
                    is extended with bit values of '1' to be the
                    necessary length."
    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.3"
    ::= { docsIetfQosPHSEntry 2 }

    Information by cisco

    docsIetfQosPHSMask          OBJECT-TYPE
    SYNTAX          OCTET STRING(SIZE(0..32))
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION    "Payload header suppression mask defines the
                    bit mask that is used in combination with the
                    docsIetfQosPHSField.  It defines which bytes in
                    the header must be suppressed/restored by the
                    sending or receiving device.

                    Each bit of this bit mask corresponds to a byte
                    in the docsIetfQosPHSField, with the least
                    significant bit corresponding to the first byte
                    of the docsIetfQosPHSField.

                    Each bit of the bit mask specifies whether
                    the corresponding byte should be suppressed
                    in the packet.  A bit value of '1' indicates that
                    the byte should be suppressed by the sending
                    device and restored by the receiving device.
                    A bit value of '0' indicates that
                    the byte should not be suppressed by the sending
                    device or restored by the receiving device.

                    If the bit mask does not contain a bit for each
                    byte in the docsIetfQosPHSField, then the bit mask
                    is extended with bit values of '1' to be the
                    necessary length."
    REFERENCE       "SP-RFIv2.0-I06-040804, Appendix C.2.2.10.3"
    ::= { docsIetfQosPHSEntry 2 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (4)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.127.1.10.1.1 docsIetfQosPHSField 0 0 Payload header suppression field defines the
    bytes of the header that must be
    suppressed/restored by the sending/receiving
    device.…
    1.3.6.1.2.1.127.1.10.1.3 docsIetfQosPHSSize 0 0 Payload header suppression size specifies the
    number of bytes in the header to be suppressed
    and restored.

    The value of this objec…
    1.3.6.1.2.1.127.1.10.1.4 docsIetfQosPHSVerify 0 0 Payload header suppression verification value. If
    'true', the sender must verify docsIetfQosPHSField
    is the same as what is cont…
    1.3.6.1.2.1.127.1.10.1.5 docsIetfQosPHSIndex 0 0 Payload header suppression index uniquely
    references the PHS rule for a given service flow.