Defines the type of the QOS parameter set defined
by this row. active(1) indicates the Active QOS
parameter set, describing the service currently
being provided by the DOCSIS MAC domain to the
Service Flow. admitted(2) indicates the Admitted
QOS Parameter Set, describing services reserved by
the DOCSIS MAC domain for use by the service
flow. provisioned (3) describes the QOS Parameter
Set defined in the DOCSIS CM Configuration file for
the Service Flow.
Parsed from file DOCS-IETF-QOS-MIB.mib
Module: DOCS-IETF-QOS-MIB
Defines the type of the QOS parameter set defined
by this row. active(1) indicates the Active QOS
parameter set, describing the service currently
being provided by the DOCSIS MAC domain to the
Service Flow. admitted(2) indicates the Admitted
QOS Parameter Set, describing services reserved by
the DOCSIS MAC domain for use by the service
flow. provisioned (3) describes the QOS Parameter
Set defined in the DOCSIS CM Configuration file for
the Service Flow.
Defines the type of the QOS parameter set defined
by this row. active(1) indicates the Active QOS
parameter set, describing the service currently
being provided by the DOCSIS MAC domain to the
Service Flow. admitted(2) indicates the Admitted
QOS Parameter Set, describing services reserved by
the DOCSIS MAC domain for use by the service
flow. provisioned (3) describes the QOS Parameter
Set defined in the DOCSIS CM Configuration file for
the Service Flow.
Parsed from file rfc4323-IPCDN-DOCSIS-QoS.mib.txt
Company: None
Module: DOCS-IETF-QOS-MIB
Defines the type of the QOS parameter set defined
by this row. active(1) indicates the Active QOS
parameter set, describing the service currently
being provided by the DOCSIS MAC domain to the
Service Flow. admitted(2) indicates the Admitted
QOS Parameter Set, describing services reserved by
the DOCSIS MAC domain for use by the service
flow. provisioned (3) describes the QOS Parameter
Set defined in the DOCSIS CM Configuration file for
the Service Flow.
docsIetfQosParamSetType OBJECT-TYPE SYNTAX INTEGER { active (1), admitted (2), provisioned (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the type of the QOS parameter set defined by this row. active(1) indicates the Active QOS parameter set, describing the service currently being provided by the DOCSIS MAC domain to the Service Flow. admitted(2) indicates the Admitted QOS Parameter Set, describing services reserved by the DOCSIS MAC domain for use by the service flow. provisioned (3) describes the QOS Parameter Set defined in the DOCSIS CM Configuration file for the Service Flow." REFERENCE "SP-RFIv2.0-I06-040804, 8.1.5" ::= { docsIetfQosParamSetEntry 20 }
docsIetfQosParamSetType OBJECT-TYPE SYNTAX INTEGER { active(1), admitted(2), provisioned(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines the type of the QOS parameter set defined by this row. active(1) indicates the Active QOS parameter set, describing the service currently being provided by the DOCSIS MAC domain to the Service Flow. admitted(2) indicates the Admitted QOS Parameter Set, describing services reserved by the DOCSIS MAC domain for use by the service flow. provisioned (3) describes the QOS Parameter Set defined in the DOCSIS CM Configuration file for the Service Flow." REFERENCE "SP-RFIv2.0-I06-040804, 8.1.5" ::= { docsIetfQosParamSetEntry 20 }
Vendor: Cisco Systems
Module: DOCS-IETF-QOS-MIB (DOCS-IETF-QOS-MIB-V1SMI.my)
Type: TABULAR
Access: not-accessible
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
docsIetfQosParamSetType OBJECT-TYPE SYNTAX INTEGER { active (1), admitted (2), provisioned (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the type of the QOS parameter set defined by this row. active(1) indicates the Active QOS parameter set, describing the service currently being provided by the DOCSIS MAC domain to the Service Flow. admitted(2) indicates the Admitted QOS Parameter Set, describing services reserved by the DOCSIS MAC domain for use by the service flow. provisioned (3) describes the QOS Parameter Set defined in the DOCSIS CM Configuration file for the Service Flow." REFERENCE "SP-RFIv2.0-I06-040804, 8.1.5" ::= { docsIetfQosParamSetEntry 20 }
docsIetfQosParamSetType OBJECT-TYPE SYNTAX INTEGER { active (1), admitted (2), provisioned (3) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Defines the type of the QOS parameter set defined by this row. active(1) indicates the Active QOS parameter set, describing the service currently being provided by the DOCSIS MAC domain to the Service Flow. admitted(2) indicates the Admitted QOS Parameter Set, describing services reserved by the DOCSIS MAC domain for use by the service flow. provisioned (3) describes the QOS Parameter Set defined in the DOCSIS CM Configuration file for the Service Flow." REFERENCE "SP-RFIv2.0-I06-040804, 8.1.5" ::= { docsIetfQosParamSetEntry 20 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.127.1.2.1.1 | docsIetfQosParamSetServiceClassName | 0 | 0 | Refers to the Service Class Name from which the parameter set values were derived. If the referenced parameter is not present in … |
1.3.6.1.2.1.127.1.2.1.2 | docsIetfQosParamSetPriority | 0 | 0 | The relative priority of a Service Flow. Higher numbers indicate higher priority. This priority should only be used to differenti… |
1.3.6.1.2.1.127.1.2.1.3 | docsIetfQosParamSetMaxTrafficRate | 0 | 0 | Maximum sustained traffic rate allowed for this Service Flow in bits/sec. Must count all MAC frame data PDU from the bytes follo… |
1.3.6.1.2.1.127.1.2.1.4 | docsIetfQosParamSetMaxTrafficBurst | 0 | 0 | Specifies the token bucket size in bytes for this parameter set. The value is calculated from the byte following the MAC header … |
1.3.6.1.2.1.127.1.2.1.5 | docsIetfQosParamSetMinReservedRate | 0 | 0 | Specifies the guaranteed minimum rate in bits/sec for this parameter set. The value is calculated from the byte following the MA… |
1.3.6.1.2.1.127.1.2.1.6 | docsIetfQosParamSetMinReservedPkt | 0 | 0 | Specifies an assumed minimum packet size in bytes for which the docsIetfQosParamSetMinReservedRate will be provided. The value is… |
1.3.6.1.2.1.127.1.2.1.7 | docsIetfQosParamSetActiveTimeout | 0 | 0 | Specifies the maximum duration in seconds that resources remain unused on an active service flow before CMTS signals that both ac… |
1.3.6.1.2.1.127.1.2.1.8 | docsIetfQosParamSetAdmittedTimeout | 0 | 0 | Specifies the maximum duration in seconds that resources remain in admitted state before resources must be released. The value of … |
1.3.6.1.2.1.127.1.2.1.9 | docsIetfQosParamSetMaxConcatBurst | 0 | 0 | Specifies the maximum concatenated burst in bytes that an upstream Service Flow is allowed. The value is calculated from the FC b… |
1.3.6.1.2.1.127.1.2.1.10 | docsIetfQosParamSetSchedulingType | 0 | 0 | Specifies the upstream scheduling service used for upstream Service Flow. If the referenced parameter is not present in the corres… |
1.3.6.1.2.1.127.1.2.1.11 | docsIetfQosParamSetNomPollInterval | 0 | 0 | Specifies the nominal interval in microseconds between successive unicast request opportunities on an upstream Service Flow. This … |
1.3.6.1.2.1.127.1.2.1.12 | docsIetfQosParamSetTolPollJitter | 0 | 0 | Specifies the maximum amount of time in microseconds that the unicast request interval may be delayed from the nominal periodic sc… |
1.3.6.1.2.1.127.1.2.1.13 | docsIetfQosParamSetUnsolicitGrantSize | 0 | 0 | Specifies the unsolicited grant size in bytes. The grant size includes the entire MAC frame data PDU from the Frame Control byte … |
1.3.6.1.2.1.127.1.2.1.14 | docsIetfQosParamSetNomGrantInterval | 0 | 0 | Specifies the nominal interval in microseconds between successive data grant opportunities on an upstream Service Flow. The refere… |
1.3.6.1.2.1.127.1.2.1.15 | docsIetfQosParamSetTolGrantJitter | 0 | 0 | Specifies the maximum amount of time in microseconds that the transmission opportunities may be delayed from the nominal periodic… |
1.3.6.1.2.1.127.1.2.1.16 | docsIetfQosParamSetGrantsPerInterval | 0 | 0 | Specifies the number of data grants per Nominal Grant Interval (docsIetfQosParamSetNomGrantInterval). The referenced parameter is … |
1.3.6.1.2.1.127.1.2.1.17 | docsIetfQosParamSetTosAndMask | 0 | 0 | Specifies the AND mask for the IP TOS byte for overwriting IP packet's TOS value. The IP packet TOS byte is bitwise ANDed with do… |
1.3.6.1.2.1.127.1.2.1.18 | docsIetfQosParamSetTosOrMask | 0 | 0 | Specifies the OR mask for the IP TOS byte. See the description of docsIetfQosParamSetTosAndMask for further details. The IP TOS oc… |
1.3.6.1.2.1.127.1.2.1.19 | docsIetfQosParamSetMaxLatency | 0 | 0 | Specifies the maximum latency between the reception of a packet by the CMTS on its NSI and the forwarding of the packet to the RF… |
1.3.6.1.2.1.127.1.2.1.21 | docsIetfQosParamSetRequestPolicyOct | 0 | 0 | Specifies which transmit interval opportunities the CM omits for upstream transmission requests and packet transmissions. This o… |
1.3.6.1.2.1.127.1.2.1.22 | docsIetfQosParamSetBitMap | 0 | 0 | This object indicates the set of QOS Parameter Set parameters actually signaled in the DOCSIS registration or dynamic service req… |