Reference record for OID 1.3.6.1.2.1.132.1.2

parent

1.3.6.1.2.1.132.1 (docsDevNotifControl)

node code

2

node name

docsDevCmtsNotifControl

dot oid

1.3.6.1.2.1.132.1.2

type

OBJECT-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDevNotifMIB(132) docsDevNotifControl(1) docsDevCmtsNotifControl(2)}

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsDevNotifMIB(132) docsDevNotifControl(1) docsDevCmtsNotifControl(2)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDevNotifMIB(132) docsDevNotifControl(1) docsDevCmtsNotifControl(2)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) docsDevNotifMIB(132) docsDevNotifControl(1) docsDevCmtsNotifControl(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDevNotifMIB(132) docsDevNotifControl(1) docsDevCmtsNotifControl(2)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsDevNotifMIB(132) docsDevNotifControl(1) docsDevCmtsNotifControl(2)}

iri oid

/iso/identified-organization/dod/internet/mgmt/mib-2/docsDevNotifMIB/docsDevNotifControl/docsDevCmtsNotifControl

/iso/identified-organization/dod/internet/mgmt/mib/docsDevNotifMIB/docsDevNotifControl/docsDevCmtsNotifControl

/iso/org/dod/internet/mgmt/mib-2/docsDevNotifMIB/docsDevNotifControl/docsDevCmtsNotifControl

/iso/org/dod/internet/mgmt/mib/docsDevNotifMIB/docsDevNotifControl/docsDevCmtsNotifControl

/iso/iso-identified-organization/dod/internet/mgmt/mib-2/docsDevNotifMIB/docsDevNotifControl/docsDevCmtsNotifControl

/iso/iso-identified-organization/dod/internet/mgmt/mib/docsDevNotifMIB/docsDevNotifControl/docsDevCmtsNotifControl

iri by oid_info

/ISO/Identified-Organization/6/1/2/1/132/1/2

Description by circitor

The object is used to enable specific CMTS notifications.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailNotif is enabled. If it is not set,
the notification is disabled. Note that notifications are
also under the control of the MIB modules defined in
RFC3413.




If the device is rebooted,the value of this object SHOULD
revert to the default value.

Parsed from file DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB.mib
Module: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB

Description by cisco_v1

The object is used to enable specific CMTS notifications.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailNotif is enabled. If it is not set,
the notification is disabled. Note that notifications are
also under the control of the MIB modules defined in
RFC3413.

If the device is rebooted,the value of this object SHOULD
revert to the default value.

Description by mibdepot

The object is used to enable specific CMTS notifications.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailNotif is enabled. If it is not set,
the notification is disabled. Note that notifications are
also under the control of the MIB modules defined in
RFC3413.

If the device is rebooted,the value of this object SHOULD
revert to the default value.

Parsed from file rfc4547-DOCSIS-Event-Notification.mib.txt
Company: None
Module: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB

Description by cisco

The object is used to enable specific CMTS notifications.
For example, if the first bit is set, then
docsDevCmtsInitRegRspFailNotif is enabled. If it is not set,
the notification is disabled. Note that notifications are
also under the control of the MIB modules defined in
RFC3413.

If the device is rebooted,the value of this object SHOULD
revert to the default value.

Information by circitor

docsDevCmtsNotifControl OBJECT-TYPE
    SYNTAX BITS {
        cmtsInitRegReqFailNotif( 0),
        cmtsInitRegRspFailNotif( 1),
        cmtsInitRegAckFailNotif( 2),
        cmtsDynServReqFailNotif( 3),
        cmtsDynServRspFailNotif( 4),
        cmtsDynServAckFailNotif( 5),
        cmtsBpiInitNotif( 6),
        cmtsBPKMNotif( 7),
        cmtsDynamicSANotif( 8),
        cmtsDCCReqFailNotif( 9),
        cmtsDCCRspFailNotif( 10),
        cmtsDCCAckFailNotif( 11)
    }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
       "The object is used to enable specific CMTS notifications.
        For example, if the first bit is set, then
        docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
        the notification is disabled.  Note that notifications are
        also under the control of the MIB modules defined in
        RFC3413.




        If the device is rebooted,the value of this object SHOULD
        revert to the default value.
       "
    DEFVAL { {} }
    ::= { docsDevNotifControl 2 }

Information by cisco_v1

docsDevCmtsNotifControl OBJECT-TYPE
    SYNTAX OCTET STRING(SIZE(1..2))
        
        
        
        
        
        
        
        
        
        
        
        
        
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The object is used to enable specific CMTS notifications.
         For example, if the first bit is set, then
         docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
         the notification is disabled.  Note that notifications are
         also under the control of the MIB modules defined in
         RFC3413.
        
         If the device is rebooted,the value of this object SHOULD
         revert to the default value."
    DEFVAL { '0000'h }
    ::= { docsDevNotifControl 2 }

Information by oid_info

Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

Information by mibdepot

docsDevCmtsNotifControl OBJECT-TYPE
       SYNTAX BITS {
           cmtsInitRegReqFailNotif( 0),
           cmtsInitRegRspFailNotif( 1),
           cmtsInitRegAckFailNotif( 2),
           cmtsDynServReqFailNotif( 3),
           cmtsDynServRspFailNotif( 4),
           cmtsDynServAckFailNotif( 5),
           cmtsBpiInitNotif( 6),
           cmtsBPKMNotif( 7),
           cmtsDynamicSANotif( 8),
           cmtsDCCReqFailNotif( 9),
           cmtsDCCRspFailNotif( 10),
           cmtsDCCAckFailNotif( 11)
       }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
          "The object is used to enable specific CMTS notifications.
           For example, if the first bit is set, then
           docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
           the notification is disabled.  Note that notifications are
           also under the control of the MIB modules defined in
           RFC3413.

           If the device is rebooted,the value of this object SHOULD
           revert to the default value.
          "
       DEFVAL { {} }
       ::= { docsDevNotifControl 2 }

Information by cisco

docsDevCmtsNotifControl OBJECT-TYPE
       SYNTAX BITS {
           cmtsInitRegReqFailNotif( 0),
           cmtsInitRegRspFailNotif( 1),
           cmtsInitRegAckFailNotif( 2),
           cmtsDynServReqFailNotif( 3),
           cmtsDynServRspFailNotif( 4),
           cmtsDynServAckFailNotif( 5),
           cmtsBpiInitNotif( 6),
           cmtsBPKMNotif( 7),
           cmtsDynamicSANotif( 8),
           cmtsDCCReqFailNotif( 9),
           cmtsDCCRspFailNotif( 10),
           cmtsDCCAckFailNotif( 11)
       }
       MAX-ACCESS read-write
       STATUS current
       DESCRIPTION
          "The object is used to enable specific CMTS notifications.
           For example, if the first bit is set, then
           docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
           the notification is disabled.  Note that notifications are
           also under the control of the MIB modules defined in
           RFC3413.

           If the device is rebooted,the value of this object SHOULD
           revert to the default value.
          "
       DEFVAL { {} }
       ::= { docsDevNotifControl 2 }

First Registration Authority (recovered by parent 1.3.6)

Defense Communication Agency

Current Registration Authority (recovered by parent 1.3.6.1.2)

Internet Assigned Numbers Authority

Children (1)

Brothers (1)