Reference record for OID 1.3.6.1.2.1.132.3.0.5


parent
1.3.6.1.2.1.132.3.0 (docsDevCmtsNotifs)
node code
5
node name
docsDevCmtsDynServRspFailNotif
dot oid
1.3.6.1.2.1.132.3.0.5
type
NOTIFICATION-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDevNotifMIB(132) 3(3) docsDevCmtsNotifs(0) docsDevCmtsDynServRspFailNotif(5)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsDevNotifMIB(132) 3(3) docsDevCmtsNotifs(0) docsDevCmtsDynServRspFailNotif(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDevNotifMIB(132) 3(3) docsDevCmtsNotifs(0) docsDevCmtsDynServRspFailNotif(5)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) docsDevNotifMIB(132) 3(3) docsDevCmtsNotifs(0) docsDevCmtsDynServRspFailNotif(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) docsDevNotifMIB(132) 3(3) docsDevCmtsNotifs(0) docsDevCmtsDynServRspFailNotif(5)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) docsDevNotifMIB(132) 3(3) docsDevCmtsNotifs(0) docsDevCmtsDynServRspFailNotif(5)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/docsDevNotifMIB/3/docsDevCmtsNotifs/docsDevCmtsDynServRspFailNotif
  • /iso/identified-organization/dod/internet/mgmt/mib/docsDevNotifMIB/3/docsDevCmtsNotifs/docsDevCmtsDynServRspFailNotif
  • /iso/org/dod/internet/mgmt/mib-2/docsDevNotifMIB/3/docsDevCmtsNotifs/docsDevCmtsDynServRspFailNotif
  • /iso/org/dod/internet/mgmt/mib/docsDevNotifMIB/3/docsDevCmtsNotifs/docsDevCmtsDynServRspFailNotif
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/docsDevNotifMIB/3/docsDevCmtsNotifs/docsDevCmtsDynServRspFailNotif
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/docsDevNotifMIB/3/docsDevCmtsNotifs/docsDevCmtsDynServRspFailNotif
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/132/3/0/5

    Description by circitor

    A notification to report the failure of a dynamic service
    response during the dynamic services process
    that was detected by the CMTS.

    This notification sends additional information about
    the event by including the following objects in its
    varbinding list.
    - docsDevEvLevel: the priority level associated with the
    event.
    - docsDevEvId: the unique identifier of the event that
    occurred.
    - docsDevEvText: a textual description of the event.
    - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
    with which this notification is associated.
    - ifPhysAddress: the MAC address of the CMTS
    (if there is a cable card/interface in the CMTS,
    then it is actually the MAC address of the cable
    interface that connected to the CM) cable interface
    connected to the CM.
    - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
    that the reporting CM is operating in.
    - docsIfDocsisBaseCapability: the highest
    version of the DOCSIS specification (1.0, 1.1, 2.0)
    that the device is capable of supporting.
    - docsIfCmtsCmStatusModulationType: the upstream
    modulation methodology used by the CM.

    Parsed from file DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB.mib
    Module: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB

    Description by oid_info

    docsDevCmtsDynServRspFailNotif NOTIFICATION-TYPE
    OBJECTS {
    docsDevEvLevel,
    docsDevEvId,
    docsDevEvText,
    docsIfCmtsCmStatusMacAddress,
    ifPhysAddress,
    docsIfCmtsCmStatusDocsisRegMode,
    docsIfDocsisBaseCapability,
    docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION
    "A notification to report the failure of a dynamic service
    response during the dynamic services process
    that was detected by the CMTS.
    This notification sends additional information about
    the event by including the following objects in its
    varbinding list.
    - docsDevEvLevel: the priority level associated with the
    event.
    - docsDevEvId: the unique identifier of the event that
    occurred.
    - docsDevEvText: a textual description of the event.
    - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
    with which this notification is associated.
    - ifPhysAddress: the MAC address of the CMTS
    (if there is a cable card/interface in the CMTS,
    then it is actually the MAC address of the cable
    interface that connected to the CM) cable interface
    connected to the CM.
    - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
    that the reporting CM is operating in.
    - docsIfDocsisBaseCapability: the highest
    version of the DOCSIS specification (1.0, 1.1, 2.0)
    that the device is capable of supporting.
    - docsIfCmtsCmStatusModulationType: the upstream
    modulation methodology used by the CM.
    "
    View at oid-info.com

    Description by mibdepot

    A notification to report the failure of a dynamic service
    response during the dynamic services process
    that was detected by the CMTS.

    This notification sends additional information about
    the event by including the following objects in its
    varbinding list.
    - docsDevEvLevel: the priority level associated with the
    event.
    - docsDevEvId: the unique identifier of the event that
    occurred.
    - docsDevEvText: a textual description of the event.
    - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
    with which this notification is associated.
    - ifPhysAddress: the MAC address of the CMTS
    (if there is a cable card/interface in the CMTS,
    then it is actually the MAC address of the cable
    interface that connected to the CM) cable interface
    connected to the CM.
    - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
    that the reporting CM is operating in.
    - docsIfDocsisBaseCapability: the highest
    version of the DOCSIS specification (1.0, 1.1, 2.0)
    that the device is capable of supporting.
    - docsIfCmtsCmStatusModulationType: the upstream
    modulation methodology used by the CM.

    Parsed from file rfc4547-DOCSIS-Event-Notification.mib.txt
    Company: None
    Module: DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB

    Description by cisco

    A notification to report the failure of a dynamic service
    response during the dynamic services process
    that was detected by the CMTS.

    This notification sends additional information about
    the event by including the following objects in its
    varbinding list.
    - docsDevEvLevel: the priority level associated with the
    event.
    - docsDevEvId: the unique identifier of the event that
    occurred.
    - docsDevEvText: a textual description of the event.
    - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
    with which this notification is associated.
    - ifPhysAddress: the MAC address of the CMTS
    (if there is a cable card/interface in the CMTS,
    then it is actually the MAC address of the cable
    interface that connected to the CM) cable interface
    connected to the CM.
    - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
    that the reporting CM is operating in.
    - docsIfDocsisBaseCapability: the highest
    version of the DOCSIS specification (1.0, 1.1, 2.0)
    that the device is capable of supporting.
    - docsIfCmtsCmStatusModulationType: the upstream
    modulation methodology used by the CM.

    Information by circitor

    docsDevCmtsDynServRspFailNotif NOTIFICATION-TYPE
    OBJECTS {
        docsDevEvLevel,
        docsDevEvId,
        docsDevEvText,
        docsIfCmtsCmStatusMacAddress,
        ifPhysAddress,
        docsIfCmtsCmStatusDocsisRegMode,
        docsIfDocsisBaseCapability,
        docsIfCmtsCmStatusModulationType
    }
    STATUS current
    DESCRIPTION



        "A notification to report the failure of a dynamic service
         response during the dynamic services process
         that was detected by the CMTS.

         This notification sends additional information about
         the event by including the following objects in its
         varbinding list.
         - docsDevEvLevel: the priority level associated with the
           event.
         - docsDevEvId: the unique identifier of the event that
           occurred.
         - docsDevEvText: a textual description of the event.
         - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
           with which this notification is associated.
         - ifPhysAddress: the MAC address of the CMTS
           (if there is a cable card/interface in the CMTS,
           then it is actually the MAC address of the cable
           interface that connected to the CM) cable interface
           connected to the CM.
         - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
           that the reporting CM is operating in.
         - docsIfDocsisBaseCapability: the highest
           version of the DOCSIS specification (1.0, 1.1, 2.0)
           that the device is capable of supporting.
         - docsIfCmtsCmStatusModulationType: the upstream
           modulation methodology used by the CM.
        "
    ::= { docsDevCmtsNotifs 5 }

    Information by mibdepot

    docsDevCmtsDynServRspFailNotif NOTIFICATION-TYPE
       OBJECTS {
           docsDevEvLevel,
           docsDevEvId,
           docsDevEvText,
           docsIfCmtsCmStatusMacAddress,
           ifPhysAddress,
           docsIfCmtsCmStatusDocsisRegMode,
           docsIfDocsisBaseCapability,
           docsIfCmtsCmStatusModulationType
       }
       STATUS current
       DESCRIPTION
           "A notification to report the failure of a dynamic service
            response during the dynamic services process
            that was detected by the CMTS.

            This notification sends additional information about
            the event by including the following objects in its
            varbinding list.
            - docsDevEvLevel: the priority level associated with the
              event.
            - docsDevEvId: the unique identifier of the event that
              occurred.
            - docsDevEvText: a textual description of the event.
            - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
              with which this notification is associated.
            - ifPhysAddress: the MAC address of the CMTS
              (if there is a cable card/interface in the CMTS,
              then it is actually the MAC address of the cable
              interface that connected to the CM) cable interface
              connected to the CM.
            - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
              that the reporting CM is operating in.
            - docsIfDocsisBaseCapability: the highest
              version of the DOCSIS specification (1.0, 1.1, 2.0)
              that the device is capable of supporting.
            - docsIfCmtsCmStatusModulationType: the upstream
              modulation methodology used by the CM.
           "
       ::= { docsDevCmtsNotifs 5 }

    Information by cisco

    docsDevCmtsDynServRspFailNotif NOTIFICATION-TYPE
       OBJECTS {
           docsDevEvLevel,
           docsDevEvId,
           docsDevEvText,
           docsIfCmtsCmStatusMacAddress,
           ifPhysAddress,
           docsIfCmtsCmStatusDocsisRegMode,
           docsIfDocsisBaseCapability,
           docsIfCmtsCmStatusModulationType
       }
       STATUS current
       DESCRIPTION

           "A notification to report the failure of a dynamic service
            response during the dynamic services process
            that was detected by the CMTS.

            This notification sends additional information about
            the event by including the following objects in its
            varbinding list.
            - docsDevEvLevel: the priority level associated with the
              event.
            - docsDevEvId: the unique identifier of the event that
              occurred.
            - docsDevEvText: a textual description of the event.
            - docsIfCmtsCmStatusMacAddress: the MAC address of the CM
              with which this notification is associated.
            - ifPhysAddress: the MAC address of the CMTS
              (if there is a cable card/interface in the CMTS,
              then it is actually the MAC address of the cable
              interface that connected to the CM) cable interface
              connected to the CM.
            - docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
              that the reporting CM is operating in.
            - docsIfDocsisBaseCapability: the highest
              version of the DOCSIS specification (1.0, 1.1, 2.0)
              that the device is capable of supporting.
            - docsIfCmtsCmStatusModulationType: the upstream
              modulation methodology used by the CM.
           "
       ::= { docsDevCmtsNotifs 5 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (11)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.132.3.0.1 docsDevCmtsInitRegReqFailNotif 0 0 A notification to report the failure of a registration
    request from a CM during the CM initialization
    process that was detected o…
    1.3.6.1.2.1.132.3.0.2 docsDevCmtsInitRegRspFailNotif 0 0 A notification to report the failure of a registration
    response during the CM initialization
    process that was detected by the CMT…
    1.3.6.1.2.1.132.3.0.3 docsDevCmtsInitRegAckFailNotif 0 0 A notification to report the failure of a registration
    acknowledgement from the CM during the CM
    initialization process that was …
    1.3.6.1.2.1.132.3.0.4 docsDevCmtsDynServReqFailNotif 0 0 A notification to report the failure of a dynamic service
    request during the dynamic services process
    that was detected by the CM…
    1.3.6.1.2.1.132.3.0.6 docsDevCmtsDynServAckFailNotif 0 0 A notification to report the failure of a dynamic service
    acknowledgement during the dynamic services
    process that was detected b…
    1.3.6.1.2.1.132.3.0.7 docsDevCmtsBpiInitNotif 0 0 A notification to report the failure of a BPI
    initialization attempt during the CM registration process
    that was detected by the …
    1.3.6.1.2.1.132.3.0.8 docsDevCmtsBPKMNotif 0 0 A notification to report the failure of a BPKM operation
    that is detected by the CMTS.

    This notification sends additional informa…
    1.3.6.1.2.1.132.3.0.9 docsDevCmtsDynamicSANotif 0 0 A notification to report the failure of a dynamic security
    association operation that is detected by the CMTS.

    This notification …
    1.3.6.1.2.1.132.3.0.10 docsDevCmtsDCCReqFailNotif 0 0 A notification to report the failure of a dynamic channel
    change request during the dynamic channel
    change process and is detecte…
    1.3.6.1.2.1.132.3.0.11 docsDevCmtsDCCRspFailNotif 0 0 A notification to report the failure of a dynamic channel
    change response during the dynamic channel
    change process and is detect…
    1.3.6.1.2.1.132.3.0.12 docsDevCmtsDCCAckFailNotif 0 0 A notification to report the failure of a dynamic channel
    change acknowledgement during the dynamic channel
    change process and is…