scsiLuState OBJECT-TYPE
SYNTAX BITS {
dataLost(0),
dynamicReconfigurationInProgress(1),
exposed(2),
fractionallyExposed(3),
partiallyExposed(4),
protectedRebuild(5),
protectionDisabled(6),
rebuild(7),
recalculate(8),
spareInUse(9),
verifyInProgress(10)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the state of a logical unit and its
meaning according to the bit position:
0 Data lost: Within the logical unit data has been lost.
1 Dynamic reconfiguration in progress: The logical unit is
being reconfigured. In this state all data is still
protected.
2 Exposed: Within the logical unit data is not protected.
In this state all data is still valid; however, loss
of data or data availability is unavoidable in the
event of a failure.
3 Fractionally exposed: Within the logical unit part of
the data is not protected. In this state all data is
still valid; however, a failure may cause a loss of
data or a loss of data availability.
4 Partially exposed: Within the logical unit one or more
underlying storage devices have failed. In this state
all data is still protected.
5 Protected rebuild: The logical unit is in the process of
a rebuild operation. In this state all data is
protected.
6 Protection disabled: Within the logical unit the data
protection method has been disabled.
In this state all data is still valid; however,
loss of data or data availability is unavoidable
in the event of a failure.
7 Rebuild: The data protection method is in the process of
rebuilding data. In this state data is not protected.
8 Recalculate: The logical unit is in the process of a
recalculate operation.
9 Spare in use: Within the logical unit a storage device
in full or part is being used to store data. In this
state all data is still protected.
10 Verify in progress: Within the logical unit data is
being verified."
REFERENCE
"SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
6.3.1.8 REPORT STATES service action [SCC2]"
View at oid-info.com
This object represents the state of a logical unit and its
meaning according to the bit position:
0 Data lost: Within the logical unit data has been lost.
1 Dynamic reconfiguration in progress: The logical unit is
being reconfigured. In this state all data is still
protected.
2 Exposed: Within the logical unit data is not protected.
In this state all data is still valid; however, loss
of data or data availability is unavoidable in the
event of a failure.
3 Fractionally exposed: Within the logical unit part of
the data is not protected. In this state all data is
still valid; however, a failure may cause a loss of
data or a loss of data availability.
4 Partially exposed: Within the logical unit one or more
underlying storage devices have failed. In this state
all data is still protected.
5 Protected rebuild: The logical unit is in the process of
a rebuild operation. In this state all data is
protected.
6 Protection disabled: Within the logical unit the data
protection method has been disabled.
In this state all data is still valid; however,
loss of data or data availability is unavoidable
in the event of a failure.
7 Rebuild: The data protection method is in the process of
rebuilding data. In this state data is not protected.
8 Recalculate: The logical unit is in the process of a
recalculate operation.
9 Spare in use: Within the logical unit a storage device
in full or part is being used to store data. In this
state all data is still protected.
10 Verify in progress: Within the logical unit data is
being verified.
Parsed from file rfc4455-Small-Computer-System-Interface-SCSI-Entities.mib.txt
Company: None
Module: SCSI-MIB
This object represents the state of a logical unit and its
meaning according to the bit position:
0 Data lost: Within the logical unit data has been lost.
1 Dynamic reconfiguration in progress: The logical unit is
being reconfigured. In this state all data is still
protected.
2 Exposed: Within the logical unit data is not protected.
In this state all data is still valid; however, loss
of data or data availability is unavoidable in the
event of a failure.
3 Fractionally exposed: Within the logical unit part of
the data is not protected. In this state all data is
still valid; however, a failure may cause a loss of
data or a loss of data availability.
4 Partially exposed: Within the logical unit one or more
underlying storage devices have failed. In this state
all data is still protected.
5 Protected rebuild: The logical unit is in the process of
a rebuild operation. In this state all data is
protected.
6 Protection disabled: Within the logical unit the data
protection method has been disabled.
In this state all data is still valid; however,
loss of data or data availability is unavoidable
in the event of a failure.
7 Rebuild: The data protection method is in the process of
rebuilding data. In this state data is not protected.
8 Recalculate: The logical unit is in the process of a
recalculate operation.
9 Spare in use: Within the logical unit a storage device
in full or part is being used to store data. In this
state all data is still protected.
10 Verify in progress: Within the logical unit data is
being verified.
Parsed from file SCSI-MIB.mib
Module: SCSI-MIB
Automatically extracted from RFC4455
scsiLuState OBJECT-TYPE SYNTAX BITS { dataLost(0), dynamicReconfigurationInProgress(1), exposed(2), fractionallyExposed(3), partiallyExposed(4), protectedRebuild(5), protectionDisabled(6), rebuild(7), recalculate(8), spareInUse(9), verifyInProgress(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of a logical unit and its meaning according to the bit position: 0 Data lost: Within the logical unit data has been lost. 1 Dynamic reconfiguration in progress: The logical unit is being reconfigured. In this state all data is still protected. 2 Exposed: Within the logical unit data is not protected. In this state all data is still valid; however, loss of data or data availability is unavoidable in the event of a failure. 3 Fractionally exposed: Within the logical unit part of the data is not protected. In this state all data is still valid; however, a failure may cause a loss of data or a loss of data availability. 4 Partially exposed: Within the logical unit one or more underlying storage devices have failed. In this state all data is still protected. 5 Protected rebuild: The logical unit is in the process of a rebuild operation. In this state all data is protected. 6 Protection disabled: Within the logical unit the data protection method has been disabled. In this state all data is still valid; however, loss of data or data availability is unavoidable in the event of a failure. 7 Rebuild: The data protection method is in the process of rebuilding data. In this state data is not protected. 8 Recalculate: The logical unit is in the process of a recalculate operation. 9 Spare in use: Within the logical unit a storage device in full or part is being used to store data. In this state all data is still protected. 10 Verify in progress: Within the logical unit data is being verified." REFERENCE "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998 6.3.1.8 REPORT STATES service action [SCC2]" ::= { scsiLuEntry 9 }
scsiLuState OBJECT-TYPE SYNTAX BITS { dataLost(0), dynamicReconfigurationInProgress(1), exposed(2), fractionallyExposed(3), partiallyExposed(4), protectedRebuild(5), protectionDisabled(6), rebuild(7), recalculate(8), spareInUse(9), verifyInProgress(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the state of a logical unit and its meaning according to the bit position: 0 Data lost: Within the logical unit data has been lost. 1 Dynamic reconfiguration in progress: The logical unit is being reconfigured. In this state all data is still protected. 2 Exposed: Within the logical unit data is not protected. In this state all data is still valid; however, loss of data or data availability is unavoidable in the event of a failure. 3 Fractionally exposed: Within the logical unit part of the data is not protected. In this state all data is still valid; however, a failure may cause a loss of data or a loss of data availability. 4 Partially exposed: Within the logical unit one or more underlying storage devices have failed. In this state all data is still protected. 5 Protected rebuild: The logical unit is in the process of a rebuild operation. In this state all data is protected. 6 Protection disabled: Within the logical unit the data protection method has been disabled. In this state all data is still valid; however, loss of data or data availability is unavoidable in the event of a failure. 7 Rebuild: The data protection method is in the process of rebuilding data. In this state data is not protected. 8 Recalculate: The logical unit is in the process of a recalculate operation. 9 Spare in use: Within the logical unit a storage device in full or part is being used to store data. In this state all data is still protected. 10 Verify in progress: Within the logical unit data is being verified." REFERENCE "SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998 6.3.1.8 REPORT STATES service action [SCC2]" ::= { scsiLuEntry 9 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.139.2.4.1.1.1 | scsiLuIndex | 0 | 0 | This object represents an arbitrary integer used to uniquely identify a particular logical unit within a particular SCSI target d… |
| 1.3.6.1.2.1.139.2.4.1.1.2 | scsiLuDefaultLun | 0 | 0 | This object represents the default Logical Unit Number (LUN) for this logical unit; if a SCSI initiator device has not been confi… |
| 1.3.6.1.2.1.139.2.4.1.1.3 | scsiLuWwnName | 0 | 0 | This object represents the World Wide Name of this LU that is the device identifier of the Vital Product Data (VPD) page name; if… |
| 1.3.6.1.2.1.139.2.4.1.1.4 | scsiLuVendorId | 0 | 0 | This object represents a string identifying the vendor of this LU as reported in the Standard INQUIRY data. |
| 1.3.6.1.2.1.139.2.4.1.1.5 | scsiLuProductId | 0 | 0 | This object represents a string identifying the product for this LU as reported in the Standard INQUIRY data. |
| 1.3.6.1.2.1.139.2.4.1.1.6 | scsiLuRevisionId | 0 | 0 | This object represents a string defining the product revision of this LU as reported in the Standard INQUIRY data. |
| 1.3.6.1.2.1.139.2.4.1.1.7 | scsiLuPeripheralType | 0 | 0 | This object is the value returned by SCSI Standard INQUIRY data. It can be: direct-access device, sequential-access device, prin… |
| 1.3.6.1.2.1.139.2.4.1.1.8 | scsiLuStatus | 0 | 0 | This object represents the status of this logical unit: - unknown(1): The status of this logical unit cannot be determined. - avai… |
| 1.3.6.1.2.1.139.2.4.1.1.10 | scsiLuInCommands | 0 | 0 | This object represents the number of commands received by this logical unit. Discontinuities in the value of this counter can occ… |
| 1.3.6.1.2.1.139.2.4.1.1.11 | scsiLuReadMegaBytes | 0 | 0 | This object represents the amount of data in megabytes read from this logical unit. Discontinuities in the value of this counter … |
| 1.3.6.1.2.1.139.2.4.1.1.12 | scsiLuWrittenMegaBytes | 0 | 0 | This object represents the amount of data in megabytes written to this logical unit. Discontinuities in the value of this counter… |
| 1.3.6.1.2.1.139.2.4.1.1.13 | scsiLuInResets | 0 | 0 | This object represents the number of times that this logical unit received - a LOGICAL UNIT RESET or TARGET RESET task management… |
| 1.3.6.1.2.1.139.2.4.1.1.14 | scsiLuOutTaskSetFullStatus | 0 | 0 | This object represents the number of Task Set full statuses issued for this logical unit. Discontinuities in the value of this co… |
| 1.3.6.1.2.1.139.2.4.1.1.15 | scsiLuHSInCommands | 0 | 0 | This object represents the number of commands received by this logical unit. This object provides support for systems that can q… |
| 1.3.6.1.2.1.139.2.4.1.1.16 | scsiLuLastCreation | 0 | 0 | This object indicates the value of sysUpTime when this row was last created. |