The Authentication Key. If the Area's Authorization
Type is simplePassword, and the key length is shorter
than 8 octets, the agent will left adjust and zero fill
to 8 octets.
When read, ospfIfAuthKey always returns an Octet String
of length zero.
Parsed from file RFC1253-MIB.mib
Module: RFC1253-MIB
The cleartext password used as an OSPF
authentication key when simplePassword security
is enabled. This object does not access any OSPF
cryptogaphic (e.g., MD5) authentication key under
any circumstance.
If the key length is shorter than 8 octets, the
agent will left adjust and zero fill to 8 octets.
Unauthenticated interfaces need no authentication
key, and simple password authentication cannot use
a key of more than 8 octets.
Note that the use of simplePassword authentication
is NOT recommended when there is concern regarding
attack upon the OSPF system. SimplePassword
authentication is only sufficient to protect against
accidental misconfigurations because it re-uses
cleartext passwords [RFC1704].
When read, ospfIfAuthKey always returns an octet
string of length zero.
The Authentication Key. If the Area's Author-
ization Type is simplePassword, and the key
length is shorter than 8 octets, the agent will
left adjust and zero fill to 8 octets.
Note that unauthenticated interfaces need no
authentication key, and simple password authen-
tication cannot use a key of more than 8 oc-
tets. Larger keys are useful only with authen-
tication mechanisms not specified in this docu-
ment.
When read, ospfIfAuthKey always returns an Oc-
tet String of length zero.
Parsed from file mib_txt_12_3_1_5.txt
Company: None
Module: ACC-MIB
The cleartext password used as an OSPF
authentication key when simplePassword security
is enabled. This object does not access any OSPF
cryptogaphic (e.g., MD5) authentication key under
any circumstance.
If the key length is shorter than 8 octets, the
agent will left adjust and zero fill to 8 octets.
Unauthenticated interfaces need no authentication
key, and simple password authentication cannot use
a key of more than 8 octets.
Note that the use of simplePassword authentication
is NOT recommended when there is concern regarding
attack upon the OSPF system. SimplePassword
authentication is only sufficient to protect against
accidental misconfigurations because it re-uses
cleartext passwords [RFC1704].
When read, ospfIfAuthKey always returns an octet
string of length zero.
ospfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The Authentication Key. If the Area's Authorization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, ospfIfAuthKey always returns an Octet String of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'h } ::= { ospfIfEntry 16 }
ospfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords [RFC1704]. When read, ospfIfAuthKey always returns an octet string of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'H } ::= { ospfIfEntry 16 }
Vendor: 3Com
Module: OSPF-MIB (OSPF-MIB.mib)
Type: TABULAR
Access: read-create
Syntax: OCTET STRING
( SIZE (
0..256 ) )
Automatically extracted from www.mibdepot.com
ospfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory ::= { ospfIfEntry 16 }
ospfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The cleartext password used as an OSPF authentication key when simplePassword security is enabled. This object does not access any OSPF cryptogaphic (e.g., MD5) authentication key under any circumstance. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. Note that the use of simplePassword authentication is NOT recommended when there is concern regarding attack upon the OSPF system. SimplePassword authentication is only sufficient to protect against accidental misconfigurations because it re-uses cleartext passwords [RFC1704]. When read, ospfIfAuthKey always returns an octet string of length zero." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'H } ::= { ospfIfEntry 16 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.14.7.1.1 | ospfIfIpAddress | 0 | 0 | The IP address of this OSPF interface. |
| 1.3.6.1.2.1.14.7.1.2 | ospfAddressLessIf | 0 | 0 | For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces w… |
| 1.3.6.1.2.1.14.7.1.3 | ospfIfAreaId | 0 | 0 | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.2.1.14.7.1.4 | ospfIfType | 0 | 0 | ospfIftype |
| 1.3.6.1.2.1.14.7.1.5 | ospfIfAdminStat | 0 | 0 | The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an interna… |
| 1.3.6.1.2.1.14.7.1.6 | ospfIfRtrPriority | 0 | 0 | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. … |
| 1.3.6.1.2.1.14.7.1.7 | ospfIfTransitDelay | 0 | 0 | ospfIftransitDelay |
| 1.3.6.1.2.1.14.7.1.8 | ospfIfRetransInterval | 0 | 0 | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value … |
| 1.3.6.1.2.1.14.7.1.9 | ospfIfHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same fo… |
| 1.3.6.1.2.1.14.7.1.10 | ospfIfRtrDeadInterval | 0 | 0 | The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should … |
| 1.3.6.1.2.1.14.7.1.11 | ospfIfPollInterval | 0 | 0 | The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. |
| 1.3.6.1.2.1.14.7.1.12 | ospfIfState | 0 | 0 | The OSPF Interface State. |
| 1.3.6.1.2.1.14.7.1.13 | ospfIfDesignatedRouter | 0 | 0 | The IP Address of the Designated Router. |
| 1.3.6.1.2.1.14.7.1.14 | ospfIfBackupDesignatedRouter | 0 | 0 | The IP Address of the Backup Designated Router. |
| 1.3.6.1.2.1.14.7.1.15 | ospfIfEvents | 0 | 0 | The number of times this OSPF interface has changed its state, or an error has occurred. |
| 1.3.6.1.2.1.14.7.1.17 | ospfIfStatus | 0 | 0 | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The int… |
| 1.3.6.1.2.1.14.7.1.18 | ospfIfMulticastForwarding | 0 | 0 | The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data … |
| 1.3.6.1.2.1.14.7.1.19 | ospfIfDemand | 0 | 0 | Indicates whether Demand OSPF procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) s… |
| 1.3.6.1.2.1.14.7.1.20 | ospfIfAuthType | 0 | 0 | ospfIfAuthtype |
| 1.3.6.1.2.1.14.7.1.21 | ospfIfLsaCount | 0 | 0 | The total number of link-local link state advertisements in this interface's link-local link state database. |
| 1.3.6.1.2.1.14.7.1.22 | ospfIfLsaCksumSum | 0 | 0 | The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state databa… |
| 1.3.6.1.2.1.14.7.1.23 | ospfIfDesignatedRouterId | 0 | 0 | The Router ID of the designated router. |
| 1.3.6.1.2.1.14.7.1.24 | ospfIfBackupDesignatedRouterId | 0 | 0 | The Router ID of the backup designated router. |