pktcMtaDevTimeServer OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object contains the Internet Address of the Time
Server used by an S-MTA for Time Synchronization. The type
of this address is determined by the value of the
pktcMtaDevTimeServerAddressType object.
When the latter has the value \ipv4(1)\, this object
contains the IP address of the Time Server used for Time
Synchronization.
In the case of an S-MTA, this object must be
populated with a value other than 0.0.0.0 as obtained
from DHCP option 4. The protocol by which the time of day
MUST be retrieved is defined in RFC 868.
In the case of an E-MTA, this object must contain a
value of 0.0.0.0 if the address type is \ipv4(1)\ since
an E-MTA does not use the Time Protocol for time
synchronization (an E-MTA uses the time retrieved by the
DOCSIS cable modem).
The behavior of this object when the value of
pktcMtaDevTimeServerAddressType is other than \ipv4(1)\
is not presently specified, but it may be specified in
future versions of this MIB module.
If a value is written into an instance of
pktcMtaDevTimeServer, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots."
REFERENCE
" RFC 868, Time Protocol;
RFC 2131, Dynamic Host Configuration Protocol;
RFC 2132, DHCP Options and BOOTP Vendor Extensions."
View at oid-info.com
This object contains the Internet Address of the Time
Server used by an S-MTA for Time Synchronization. The type
of this address is determined by the value of the
pktcMtaDevTimeServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the Time Server used for Time
Synchronization.
In the case of an S-MTA, this object must be
populated with a value other than 0.0.0.0 as obtained
from DHCP option 4. The protocol by which the time of day
MUST be retrieved is defined in RFC 868.
In the case of an E-MTA, this object must contain a
value of 0.0.0.0 if the address type is 'ipv4(1)' since
an E-MTA does not use the Time Protocol for time
synchronization (an E-MTA uses the time retrieved by the
DOCSIS cable modem).
The behavior of this object when the value of
pktcMtaDevTimeServerAddressType is other than 'ipv4(1)'
is not presently specified, but it may be specified in
future versions of this MIB module.
If a value is written into an instance of
pktcMtaDevTimeServer, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots.
Parsed from file rfc4682-IPCDN-MTA.mib.txt
Company: None
Module: PKTC-IETF-MTA-MIB
This object contains the Internet Address of the Time
Server used by an S-MTA for Time Synchronization. The type
of this address is determined by the value of the
pktcMtaDevTimeServerAddressType object.
When the latter has the value 'ipv4(1)', this object
contains the IP address of the Time Server used for Time
Synchronization.
In the case of an S-MTA, this object must be
populated with a value other than 0.0.0.0 as obtained
from DHCP option 4. The protocol by which the time of day
MUST be retrieved is defined in RFC 868.
In the case of an E-MTA, this object must contain a
value of 0.0.0.0 if the address type is 'ipv4(1)' since
an E-MTA does not use the Time Protocol for time
synchronization (an E-MTA uses the time retrieved by the
DOCSIS cable modem).
The behavior of this object when the value of
pktcMtaDevTimeServerAddressType is other than 'ipv4(1)'
is not presently specified, but it may be specified in
future versions of this MIB module.
If a value is written into an instance of
pktcMtaDevTimeServer, the agent MUST NOT retain the
supplied value across MTA re-initializations or reboots.
Parsed from file PKTC-IETF-MTA-MIB.mib
Module: PKTC-IETF-MTA-MIB
Automatically extracted from RFC4682
pktcMtaDevTimeServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION " This object contains the Internet Address of the Time Server used by an S-MTA for Time Synchronization. The type of this address is determined by the value of the pktcMtaDevTimeServerAddressType object. When the latter has the value 'ipv4(1)', this object contains the IP address of the Time Server used for Time Synchronization. In the case of an S-MTA, this object must be populated with a value other than 0.0.0.0 as obtained from DHCP option 4. The protocol by which the time of day MUST be retrieved is defined in RFC 868. In the case of an E-MTA, this object must contain a value of 0.0.0.0 if the address type is 'ipv4(1)' since an E-MTA does not use the Time Protocol for time synchronization (an E-MTA uses the time retrieved by the DOCSIS cable modem). The behavior of this object when the value of pktcMtaDevTimeServerAddressType is other than 'ipv4(1)' is not presently specified, but it may be specified in future versions of this MIB module. If a value is written into an instance of pktcMtaDevTimeServer, the agent MUST NOT retain the supplied value across MTA re-initializations or reboots." REFERENCE " RFC 868, Time Protocol; RFC 2131, Dynamic Host Configuration Protocol; RFC 2132, DHCP Options and BOOTP Vendor Extensions." ::= { pktcMtaDevServer 8}
pktcMtaDevTimeServer OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION " This object contains the Internet Address of the Time Server used by an S-MTA for Time Synchronization. The type of this address is determined by the value of the pktcMtaDevTimeServerAddressType object. When the latter has the value 'ipv4(1)', this object contains the IP address of the Time Server used for Time Synchronization. In the case of an S-MTA, this object must be populated with a value other than 0.0.0.0 as obtained from DHCP option 4. The protocol by which the time of day MUST be retrieved is defined in RFC 868. In the case of an E-MTA, this object must contain a value of 0.0.0.0 if the address type is 'ipv4(1)' since an E-MTA does not use the Time Protocol for time synchronization (an E-MTA uses the time retrieved by the DOCSIS cable modem). The behavior of this object when the value of pktcMtaDevTimeServerAddressType is other than 'ipv4(1)' is not presently specified, but it may be specified in future versions of this MIB module. If a value is written into an instance of pktcMtaDevTimeServer, the agent MUST NOT retain the supplied value across MTA re-initializations or reboots." REFERENCE " RFC 868, Time Protocol; RFC 2131, Dynamic Host Configuration Protocol; RFC 2132, DHCP Options and BOOTP Vendor Extensions." ::= { pktcMtaDevServer 8}
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.140.1.2.8.0 | pktcMtaDevTimeServer | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.140.1.2.1 | pktcMtaDevDhcpServerAddressType | 1 | 1 | This object contains the Internet address type for the PacketCable DHCP servers specified in MTA MIB. |
| 1.3.6.1.2.1.140.1.2.2 | pktcMtaDevServerDhcp1 | 1 | 1 | This object contains the Internet Address of the primary DHCP server the MTA uses during provisioning. The type of this address i… |
| 1.3.6.1.2.1.140.1.2.3 | pktcMtaDevServerDhcp2 | 1 | 1 | This object contains the Internet Address of the secondary DHCP server the MTA uses during provisioning. The type of this address… |
| 1.3.6.1.2.1.140.1.2.4 | pktcMtaDevDnsServerAddressType | 1 | 1 | This object contains the Internet address type for the PacketCable DNS servers specified in MTA MIB. |
| 1.3.6.1.2.1.140.1.2.5 | pktcMtaDevServerDns1 | 1 | 1 | This object contains the IP Address of the primary DNS server to be used by the MTA. The type of this address is determined by t… |
| 1.3.6.1.2.1.140.1.2.6 | pktcMtaDevServerDns2 | 1 | 1 | This object contains the IP Address of the secondary DNS server to be used by the MTA. The type of this address is determined by… |
| 1.3.6.1.2.1.140.1.2.7 | pktcMtaDevTimeServerAddressType | 1 | 1 | This object contains the Internet address type for the PacketCable Time servers specified in MTA MIB. |
| 1.3.6.1.2.1.140.1.2.9 | pktcMtaDevConfigFile | 1 | 1 | This object specifies the MTA device configuration file information, including the access method, the server name, and the config… |
| 1.3.6.1.2.1.140.1.2.10 | pktcMtaDevSnmpEntity | 1 | 1 | This object contains the FQDN of the SNMP entity of the Provisioning Server. When the MTA SNMP Enrollment Mechanism is used, thi… |
| 1.3.6.1.2.1.140.1.2.11 | pktcMtaDevProvConfigHash | 1 | 1 | This object contains the hash value of the contents of the configuration file. The authentication algorithm is Secure Hashing Alg… |
| 1.3.6.1.2.1.140.1.2.12 | pktcMtaDevProvConfigKey | 1 | 1 | This object contains the key used to encrypt/decrypt the configuration file when secure SNMPv3 provisioning is used. The value of … |
| 1.3.6.1.2.1.140.1.2.13 | pktcMtaDevProvConfigEncryptAlg | 1 | 1 | This object defines the encryption algorithm used for privacy protection of the MTA Configuration File content. |
| 1.3.6.1.2.1.140.1.2.14 | pktcMtaDevProvSolicitedKeyTimeout | 1 | 1 | This object defines a Kerberos Key Management timer on the MTA. It is the time period during which the MTA saves the nonce and S… |
| 1.3.6.1.2.1.140.1.2.15 | pktcMtaDevProvUnsolicitedKeyMaxTimeout | 1 | 1 | This object defines the timeout value that applies to an MTA-initiated AP-REQ/REP key management exchange with the Provisioning S… |
| 1.3.6.1.2.1.140.1.2.16 | pktcMtaDevProvUnsolicitedKeyNomTimeout | 1 | 1 | This object defines the starting value of the timeout for the AP-REQ/REP Backoff and Retry mechanism with exponential timeout in … |
| 1.3.6.1.2.1.140.1.2.17 | pktcMtaDevProvUnsolicitedKeyMaxRetries | 1 | 1 | This object contains a retry counter that applies to an MTA-initiated AP-REQ/REP key management exchange with the Provisioning Se… |
| 1.3.6.1.2.1.140.1.2.18 | pktcMtaDevProvKerbRealmName | 1 | 1 | This object contains the name of the associated provisioning Kerberos realm acquired during the MTA4 provisioning step (DHCP Ack)… |
| 1.3.6.1.2.1.140.1.2.19 | pktcMtaDevProvState | 1 | 1 | This object defines the MTA provisioning state. If the state is: 'operational(1)', the device has completed the loading and proces… |