dot3ExtPkgObjectReportThreshold OBJECT-TYPE
SYNTAX Unsigned32
UNITS "TQ (16nsec)"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"An object that defines the value of a threshold report
for each queue_set in the REPORT message as defined in
[802.3ah], clause 64. The number of sets for each queue
is dot3ExtPkgObjectReportNumThreshold.
In the REPORT message, each queue_set reporting will
provide information on the occupancy of the queues for
frames below the matching Threshold.
The value returned shall be in Time quanta (TQ), which
is 16nsec or 2 octets increments.
Read operation provides the threshold value. Write
operation sets the value of the threshold.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectReportThreshold can lead to a change in
the reporting of the ONU interface and therefore to a
change in the bandwidth allocation of the respective
interface. This change may lead a degradation or an
interruption of service for the users connected to the
respective EPON interface.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface,
for each queue and for each queue_set. At the ONU, it has
a distinct value for each queue and for each queue_set."
DEFVAL { 0 }
View at oid-info.com
An object that defines the value of a threshold report
for each queue_set in the REPORT message as defined in
[802.3ah], clause 64. The number of sets for each queue
is dot3ExtPkgObjectReportNumThreshold.
In the REPORT message, each queue_set reporting will
provide information on the occupancy of the queues for
frames below the matching Threshold.
The value returned shall be in Time quanta (TQ), which
is 16nsec or 2 octets increments.
Read operation provides the threshold value. Write
operation sets the value of the threshold.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectReportThreshold can lead to a change in
the reporting of the ONU interface and therefore to a
change in the bandwidth allocation of the respective
interface. This change may lead a degradation or an
interruption of service for the users connected to the
respective EPON interface.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface,
for each queue and for each queue_set. At the ONU, it has
a distinct value for each queue and for each queue_set.
Parsed from file rfc4837-Ethernet-Passive-Optical-Networks-EPON.mib.txt
Company: None
Module: DOT3-EPON-MIB
An object that defines the value of a threshold report
for each queue_set in the REPORT message as defined in
[802.3ah], clause 64. The number of sets for each queue
is dot3ExtPkgObjectReportNumThreshold.
In the REPORT message, each queue_set reporting will
provide information on the occupancy of the queues for
frames below the matching Threshold.
The value returned shall be in Time quanta (TQ), which
is 16nsec or 2 octets increments.
Read operation provides the threshold value. Write
operation sets the value of the threshold.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectReportThreshold can lead to a change in
the reporting of the ONU interface and therefore to a
change in the bandwidth allocation of the respective
interface. This change may lead a degradation or an
interruption of service for the users connected to the
respective EPON interface.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface,
for each queue and for each queue_set. At the ONU, it has
a distinct value for each queue and for each queue_set.
Parsed from file DOT3-EPON-MIB.mib
Module: DOT3-EPON-MIB
Automatically extracted from RFC4837
dot3ExtPkgObjectReportThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "TQ (16nsec)" MAX-ACCESS read-write STATUS current DESCRIPTION "An object that defines the value of a threshold report for each queue_set in the REPORT message as defined in [802.3ah], clause 64. The number of sets for each queue is dot3ExtPkgObjectReportNumThreshold. In the REPORT message, each queue_set reporting will provide information on the occupancy of the queues for frames below the matching Threshold. The value returned shall be in Time quanta (TQ), which is 16nsec or 2 octets increments. Read operation provides the threshold value. Write operation sets the value of the threshold. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgObjectReportThreshold can lead to a change in the reporting of the ONU interface and therefore to a change in the bandwidth allocation of the respective interface. This change may lead a degradation or an interruption of service for the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface, for each queue and for each queue_set. At the ONU, it has a distinct value for each queue and for each queue_set." DEFVAL { 0 } ::= { dot3ExtPkgQueueSetsEntry 3 }
dot3ExtPkgObjectReportThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "TQ (16nsec)" MAX-ACCESS read-write STATUS current DESCRIPTION "An object that defines the value of a threshold report for each queue_set in the REPORT message as defined in [802.3ah], clause 64. The number of sets for each queue is dot3ExtPkgObjectReportNumThreshold. In the REPORT message, each queue_set reporting will provide information on the occupancy of the queues for frames below the matching Threshold. The value returned shall be in Time quanta (TQ), which is 16nsec or 2 octets increments. Read operation provides the threshold value. Write operation sets the value of the threshold. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgObjectReportThreshold can lead to a change in the reporting of the ONU interface and therefore to a change in the bandwidth allocation of the respective interface. This change may lead a degradation or an interruption of service for the users connected to the respective EPON interface. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface, for each queue and for each queue_set. At the ONU, it has a distinct value for each queue and for each queue_set." DEFVAL { 0 } ::= { dot3ExtPkgQueueSetsEntry 3 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.155.1.4.1.3.1.1 | dot3QueueSetQueueIndex | 0 | 0 | An object that identifies the queue index for the dot3ExtPkgQueueSetsTable table. The queues are reported in the MPCP REPORT mes… |
1.3.6.1.2.1.155.1.4.1.3.1.2 | dot3QueueSetIndex | 0 | 0 | An object that identifies the queue_set index for the dot3ExtPkgQueueSetsTable table. The queues are reported in the MPCP REPORT… |