t11FLockStatus OBJECT-TYPE
SYNTAX INTEGER {
active(1),
settingUp(2),
rejectFailure(3),
otherFailure(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object gives the current status of the lock:
\active\ -- the lock is currently established.
\settingUp\ -- the \managing\ switch is currently
attempting to set up the lock, e.g.,
it is waiting to receive Accepts
for ACAs from every switch in the
Fabric.
\rejectFailure\ -- the \managing\ switch\s attempt to
set up the lock was rejected with
the reason codes given by:
t11FLockRejectReasonCode,
t11FLockRejectReasonCodeExp and
t11FLockRejectReasonVendorCode.
\otherFailure\ -- the \managing\ switch\s attempt
to set up the lock failed (but no
reason codes are available).
For values of t11FLockInitiatorType other than \snmp\,
a row is only required to be instantiated in this table
when the value of this object is \active\.
If the value of the corresponding instance of
t11FLockInitiatorType is \snmp\, the initial value of this
object when the row is first created is \settingUp\. As
and when the setup succeeds, the value transitions to
\active\. If the setup fails, the value transitions to
either \rejectFailure\ or \otherFailure\. Note that such a
failure value is overwritten on the next attempt to obtain
the lock, which could be immediately after the failure,
e.g., by a GS-5 client.
When the value of this object is \rejectFailure\, the
rejection\s reason codes are given by the corresponding
values of t11FLockRejectReasonCode,
t11FLockRejectReasonCodeExp and
t11FLockRejectReasonVendorCode."
View at oid-info.com
This object gives the current status of the lock:
'active'
'settingUp'
attempting to set up the lock, e.g.,
it is waiting to receive Accepts
for ACAs from every switch in the
Fabric.
'rejectFailure'
set up the lock was rejected with
the reason codes given by:
t11FLockRejectReasonCode,
t11FLockRejectReasonCodeExp and
t11FLockRejectReasonVendorCode.
'otherFailure'
to set up the lock failed (but no
reason codes are available).
For values of t11FLockInitiatorType other than 'snmp',
a row is only required to be instantiated in this table
when the value of this object is 'active'.
If the value of the corresponding instance of
t11FLockInitiatorType is 'snmp', the initial value of this
object when the row is first created is 'settingUp'. As
and when the setup succeeds, the value transitions to
'active'. If the setup fails, the value transitions to
either 'rejectFailure' or 'otherFailure'. Note that such a
failure value is overwritten on the next attempt to obtain
the lock, which could be immediately after the failure,
e.g., by a GS-5 client.
When the value of this object is 'rejectFailure', the
rejection's reason codes are given by the corresponding
values of t11FLockRejectReasonCode,
t11FLockRejectReasonCodeExp and
t11FLockRejectReasonVendorCode.
Parsed from file rfc4936-Fibre-Channel-Zone-Server.mib-1.txt
Company: None
Module: T11-FC-FABRIC-LOCK-MIB
This object gives the current status of the lock:
'active'
'settingUp'
attempting to set up the lock, e.g.,
it is waiting to receive Accepts
for ACAs from every switch in the
Fabric.
'rejectFailure'
set up the lock was rejected with
the reason codes given by:
t11FLockRejectReasonCode,
t11FLockRejectReasonCodeExp and
t11FLockRejectReasonVendorCode.
'otherFailure'
to set up the lock failed (but no
reason codes are available).
For values of t11FLockInitiatorType other than 'snmp',
a row is only required to be instantiated in this table
when the value of this object is 'active'.
If the value of the corresponding instance of
t11FLockInitiatorType is 'snmp', the initial value of this
object when the row is first created is 'settingUp'. As
and when the setup succeeds, the value transitions to
'active'. If the setup fails, the value transitions to
either 'rejectFailure' or 'otherFailure'. Note that such a
failure value is overwritten on the next attempt to obtain
the lock, which could be immediately after the failure,
e.g., by a GS-5 client.
When the value of this object is 'rejectFailure', the
rejection's reason codes are given by the corresponding
values of t11FLockRejectReasonCode,
t11FLockRejectReasonCodeExp and
t11FLockRejectReasonVendorCode.
Parsed from file T11-FC-FABRIC-LOCK-MIB.mib
Module: T11-FC-FABRIC-LOCK-MIB
Automatically extracted from RFC4936
t11FLockStatus OBJECT-TYPE SYNTAX INTEGER { active(1), settingUp(2), rejectFailure(3), otherFailure(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the current status of the lock: 'active' 'settingUp' attempting to set up the lock, e.g., it is waiting to receive Accepts for ACAs from every switch in the Fabric. 'rejectFailure' set up the lock was rejected with the reason codes given by: t11FLockRejectReasonCode, t11FLockRejectReasonCodeExp and t11FLockRejectReasonVendorCode. 'otherFailure' to set up the lock failed (but no reason codes are available). For values of t11FLockInitiatorType other than 'snmp', a row is only required to be instantiated in this table when the value of this object is 'active'. If the value of the corresponding instance of t11FLockInitiatorType is 'snmp', the initial value of this object when the row is first created is 'settingUp'. As and when the setup succeeds, the value transitions to 'active'. If the setup fails, the value transitions to either 'rejectFailure' or 'otherFailure'. Note that such a failure value is overwritten on the next attempt to obtain the lock, which could be immediately after the failure, e.g., by a GS-5 client. When the value of this object is 'rejectFailure', the rejection's reason codes are given by the corresponding values of t11FLockRejectReasonCode, t11FLockRejectReasonCodeExp and t11FLockRejectReasonVendorCode." ::= { t11FLockEntry 7 }
t11FLockStatus OBJECT-TYPE SYNTAX INTEGER { active(1), settingUp(2), rejectFailure(3), otherFailure(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object gives the current status of the lock: 'active' 'settingUp' attempting to set up the lock, e.g., it is waiting to receive Accepts for ACAs from every switch in the Fabric. 'rejectFailure' set up the lock was rejected with the reason codes given by: t11FLockRejectReasonCode, t11FLockRejectReasonCodeExp and t11FLockRejectReasonVendorCode. 'otherFailure' to set up the lock failed (but no reason codes are available). For values of t11FLockInitiatorType other than 'snmp', a row is only required to be instantiated in this table when the value of this object is 'active'. If the value of the corresponding instance of t11FLockInitiatorType is 'snmp', the initial value of this object when the row is first created is 'settingUp'. As and when the setup succeeds, the value transitions to 'active'. If the setup fails, the value transitions to either 'rejectFailure' or 'otherFailure'. Note that such a failure value is overwritten on the next attempt to obtain the lock, which could be immediately after the failure, e.g., by a GS-5 client. When the value of this object is 'rejectFailure', the rejection's reason codes are given by the corresponding values of t11FLockRejectReasonCode, t11FLockRejectReasonCodeExp and t11FLockRejectReasonVendorCode." ::= { t11FLockEntry 7 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.159.1.1.1.1.1 | t11FLockFabricIndex | 0 | 0 | A unique index value that uniquely identifies a particular Fabric. In a Fabric conformant to FC-SW-4, multiple Virtual Fabrics can… |
| 1.3.6.1.2.1.159.1.1.1.1.2 | t11FLockApplicationID | 0 | 0 | The Application_ID value that identifies the type of application for which the Fabric is locked. A lock established via Acquire C… |
| 1.3.6.1.2.1.159.1.1.1.1.3 | t11FLockInitiatorType | 0 | 0 | This object specifies what type of initiator generated the request that caused this lock to be established: other - none of t… |
| 1.3.6.1.2.1.159.1.1.1.1.4 | t11FLockInitiator | 0 | 0 | This object specifies the initiator whose request caused this lock to be established. If the value of the corresponding instance o… |
| 1.3.6.1.2.1.159.1.1.1.1.5 | t11FLockInitiatorIpAddrType | 0 | 0 | This object specifies the type of IP address contained in the corresponding instance of t11FLockInitiatorIpAddr. If the IP addres… |
| 1.3.6.1.2.1.159.1.1.1.1.6 | t11FLockInitiatorIpAddr | 0 | 0 | This object specifies the IP address of the location of the initiator that established this lock via a request of the type given … |
| 1.3.6.1.2.1.159.1.1.1.1.8 | t11FLockRejectReasonCode | 0 | 0 | When the value of the corresponding instance of t11FLockStatus is 'rejectFailure', this object contains the rejection's reason co… |
| 1.3.6.1.2.1.159.1.1.1.1.9 | t11FLockRejectReasonCodeExp | 0 | 0 | When the value of the corresponding instance of t11FLockStatus is 'rejectFailure', this object contains the rejection's reason co… |
| 1.3.6.1.2.1.159.1.1.1.1.10 | t11FLockRejectReasonVendorCode | 0 | 0 | When the value of the corresponding instance of t11FLockStatus is 'rejectFailure', this object contains the rejection's vendor-sp… |
| 1.3.6.1.2.1.159.1.1.1.1.11 | t11FLockRowStatus | 0 | 0 | The status of this conceptual row. A row in this table can be modified or deleted via this object only when the row's value of t11… |