This object identifies the source of the data
that this tokenRingMLStats entry is configured to
analyze. This source can be any tokenRing
interface on this device. In order to identify a
particular interface, this object shall identify
the instance of the ifIndex object, defined in
MIB-II [3], for the desired interface. For
example, if an entry were to receive data from
interface #1, this object would be set to
ifIndex.1.
The statistics in this group reflect all error
reports on the local network segment attached to
the identified interface.
This object may not be modified if the associated
tokenRingMLStatsStatus object is equal to
valid(1).
tokenRingMLStatsDataSource OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object identifies the source of the data
that this tokenRingMLStats entry is configured to
analyze. This source can be any tokenRing
interface on this device. In order to identify a
particular interface, this object shall identify
the instance of the ifIndex object, defined in
MIB-II [3], for the desired interface. For
example, if an entry were to receive data from
interface #1, this object would be set to
ifIndex.1.
The statistics in this group reflect all error
reports on the local network segment attached to
the identified interface.
This object may not be modified if the associated
tokenRingMLStatsStatus object is equal to
valid(1)."
View at oid-info.com
This object identifies the source of the data
that this tokenRingMLStats entry is configured to
analyze. This source can be any tokenRing
interface on this device. In order to identify a
particular interface, this object shall identify
the instance of the ifIndex object, defined in the
IF-MIB [17], for the desired interface. For
example, if an entry were to receive data from
interface #1, this object would be set to
ifIndex.1.
The statistics in this group reflect all error
reports on the local network segment attached to
the identified interface.
This object may not be modified if the associated
tokenRingMLStatsStatus object is equal to
valid(1).
Parsed from file TOKEN-RING-RMON-MIB.mib.txt
Company: None
Module: TOKEN-RING-RMON-MIB
This object identifies the source of the data
that this tokenRingMLStats entry is configured to
analyze. This source can be any tokenRing
interface on this device. In order to identify a
particular interface, this object shall identify
the instance of the ifIndex object, defined in
MIB-II [3], for the desired interface. For
example, if an entry were to receive data from
interface #1, this object would be set to
ifIndex.1.
The statistics in this group reflect all error
reports on the local network segment attached to
the identified interface.
This object may not be modified if the associated
tokenRingMLStatsStatus object is equal to
valid(1).
Parsed from file TOKEN-RING-RMON-MIB.mib
Module: TOKEN-RING-RMON-MIB
tokenRingMLStatsDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1)." ::= { tokenRingMLStatsEntry 2 }
Automatically extracted from RFC1513
tokenRingMLStatsDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in the IF-MIB [17], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1)." ::= { tokenRingMLStatsEntry 2 }
tokenRingMLStatsDataSource OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the source of the data that this tokenRingMLStats entry is configured to analyze. This source can be any tokenRing interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in MIB-II [3], for the desired interface. For example, if an entry were to receive data from interface #1, this object would be set to ifIndex.1. The statistics in this group reflect all error reports on the local network segment attached to the identified interface. This object may not be modified if the associated tokenRingMLStatsStatus object is equal to valid(1)." ::= { tokenRingMLStatsEntry 2 }
Internet Assigned Numbers Authority
To many brothers! Only 100 nearest brothers are shown.
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
... | ||||
1.3.6.1.2.1.16.1.2.1.1 | tokenRingMLStatsIndex | 6 | 6 | The value of this object uniquely identifies this tokenRingMLStats entry. |
1.3.6.1.2.1.16.1.2.1.3 | tokenRingMLStatsDropEvents | 0 | 0 | The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not nece… |
1.3.6.1.2.1.16.1.2.1.4 | tokenRingMLStatsMacOctets | 0 | 0 | The total number of octets of data in MAC packets (excluding those that were not good frames) received on the network (excluding … |
1.3.6.1.2.1.16.1.2.1.5 | tokenRingMLStatsMacPkts | 0 | 0 | The total number of MAC packets (excluding packets that were not good frames) received. |
1.3.6.1.2.1.16.1.2.1.6 | tokenRingMLStatsRingPurgeEvents | 0 | 0 | The total number of times that the ring enters the ring purge state from normal ring state. The ring purge state that comes in r… |
1.3.6.1.2.1.16.1.2.1.7 | tokenRingMLStatsRingPurgePkts | 0 | 0 | The total number of ring purge MAC packets detected by probe. |
1.3.6.1.2.1.16.1.2.1.8 | tokenRingMLStatsBeaconEvents | 0 | 0 | The total number of times that the ring enters a beaconing state (beaconFrameStreamingState, beaconBitStreamingState, beaconSetRec… |
1.3.6.1.2.1.16.1.2.1.9 | tokenRingMLStatsBeaconTime | 0 | 0 | The total amount of time that the ring has been in the beaconing state. |
1.3.6.1.2.1.16.1.2.1.10 | tokenRingMLStatsBeaconPkts | 0 | 0 | The total number of beacon MAC packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.11 | tokenRingMLStatsClaimTokenEvents | 0 | 0 | The total number of times that the ring enters the claim token state from normal ring state or ring purge state. The claim token… |
1.3.6.1.2.1.16.1.2.1.12 | tokenRingMLStatsClaimTokenPkts | 0 | 0 | The total number of claim token MAC packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.13 | tokenRingMLStatsNAUNChanges | 0 | 0 | The total number of NAUN changes detected by the probe. |
1.3.6.1.2.1.16.1.2.1.14 | tokenRingMLStatsLineErrors | 0 | 0 | The total number of line errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.15 | tokenRingMLStatsInternalErrors | 0 | 0 | The total number of adapter internal errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.16 | tokenRingMLStatsBurstErrors | 0 | 0 | The total number of burst errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.17 | tokenRingMLStatsACErrors | 0 | 0 | The total number of AC (Address Copied) errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.18 | tokenRingMLStatsAbortErrors | 0 | 0 | The total number of abort delimiters reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.19 | tokenRingMLStatsLostFrameErrors | 0 | 0 | The total number of lost frame errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.20 | tokenRingMLStatsCongestionErrors | 0 | 0 | The total number of receive congestion errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.21 | tokenRingMLStatsFrameCopiedErrors | 0 | 0 | The total number of frame copied errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.22 | tokenRingMLStatsFrequencyErrors | 0 | 0 | The total number of frequency errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.23 | tokenRingMLStatsTokenErrors | 0 | 0 | The total number of token errors reported in error reporting packets detected by the probe. |
1.3.6.1.2.1.16.1.2.1.24 | tokenRingMLStatsSoftErrorReports | 0 | 0 | The total number of soft error report frames detected by the probe. |
1.3.6.1.2.1.16.1.2.1.25 | tokenRingMLStatsRingPollEvents | 0 | 0 | The total number of ring poll events detected by the probe (i.e. the number of ring polls initiated by the active monitor that we… |
1.3.6.1.2.1.16.1.2.1.26 | tokenRingMLStatsOwner | 0 | 0 | The entity that configured this entry and is therefore using the resources assigned to it. |
1.3.6.1.2.1.16.1.2.1.27 | tokenRingMLStatsStatus | 0 | 0 | The status of this tokenRingMLStats entry. |
1.3.6.1.2.1.16.1.2.1.28 | iapStatsRxRate2Errors | 0 | 0 | iapStatsRxRate2Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 2Mbps" |
1.3.6.1.2.1.16.1.2.1.29 | iapStatsRxRate2Retries | 0 | 0 | iapStatsRxRate2Retries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx retries at rate 2Mbps" |
1.3.6.1.2.1.16.1.2.1.30 | iapStatsRxRate5Bytes | 0 | 0 | iapStatsRxRate5Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received at rate 5.5Mb… |
1.3.6.1.2.1.16.1.2.1.31 | iapStatsRxRate5Packets | 0 | 0 | iapStatsRxRate5Packets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received at rate 5… |
1.3.6.1.2.1.16.1.2.1.32 | iapStatsRxRate5Errors | 0 | 0 | iapStatsRxRate5Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 5.5Mbps" |
1.3.6.1.2.1.16.1.2.1.33 | iapStatsRxRate5Retries | 0 | 0 | iapStatsRxRate5Retries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx retries at rate 5.5Mbps" |
1.3.6.1.2.1.16.1.2.1.34 | iapStatsRxRate11Bytes | 0 | 0 | iapStatsRxRate11Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received at rate 11Mb… |
1.3.6.1.2.1.16.1.2.1.35 | iapStatsRxRate11Packets | 0 | 0 | iapStatsRxRate11Packets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received at rate … |
1.3.6.1.2.1.16.1.2.1.36 | iapStatsRxRate11Errors | 0 | 0 | iapStatsRxRate11Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 11Mbps" |
1.3.6.1.2.1.16.1.2.1.37 | iapStatsRxRate11Retries | 0 | 0 | iapStatsRxRate11Retries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx retries at rate 11Mbps" |
1.3.6.1.2.1.16.1.2.1.38 | iapStatsRxRate6Bytes | 0 | 0 | iapStatsRxRate6Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received at rate 6Mbps" |
1.3.6.1.2.1.16.1.2.1.39 | iapStatsRxRate6Packets | 0 | 0 | iapStatsRxRate6Packets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received at rate 6… |
1.3.6.1.2.1.16.1.2.1.40 | iapStatsRxRate6Errors | 0 | 0 | iapStatsRxRate6Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 6Mbps" |
1.3.6.1.2.1.16.1.2.1.41 | iapStatsRxRate6Retries | 0 | 0 | iapStatsRxRate6Retries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx retries at rate 6Mbps" |
1.3.6.1.2.1.16.1.2.1.42 | iapStatsRxRate9Bytes | 0 | 0 | iapStatsRxRate9Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received at rate 9Mbps" |
1.3.6.1.2.1.16.1.2.1.43 | iapStatsRxRate9Packets | 0 | 0 | iapStatsRxRate9Packets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received at rate 9… |
1.3.6.1.2.1.16.1.2.1.44 | iapStatsRxRate9Errors | 0 | 0 | iapStatsRxRate9Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 9Mbps" |
1.3.6.1.2.1.16.1.2.1.45 | iapStatsRxRate9Retries | 0 | 0 | iapStatsRxRate9Retries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx retries at rate 9Mbps" |
1.3.6.1.2.1.16.1.2.1.46 | iapStatsRxRate12Bytes | 0 | 0 | iapStatsRxRate12Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received at rate 12Mb… |
1.3.6.1.2.1.16.1.2.1.47 | iapStatsRxRate12Packets | 0 | 0 | iapStatsRxRate12Packets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received at rate … |
1.3.6.1.2.1.16.1.2.1.48 | iapStatsRxRate12Errors | 0 | 0 | iapStatsRxRate12Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 12Mbps" |
1.3.6.1.2.1.16.1.2.1.49 | iapStatsRxRate12Retries | 0 | 0 | iapStatsRxRate12Retries OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx retries at rate 12Mbps" |
1.3.6.1.2.1.16.1.2.1.50 | iapStatsRxRate18Bytes | 0 | 0 | iapStatsRxRate18Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes received at rate 18Mb… |
1.3.6.1.2.1.16.1.2.1.51 | iapStatsRxRate18Packets | 0 | 0 | iapStatsRxRate18Packets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Packets received at rate … |
1.3.6.1.2.1.16.1.2.1.52 | iapStatsRxRate18Errors | 0 | 0 | iapStatsRxRate18Errors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Rx errors at rate 18Mbps" |
... |