pktcSigDevrpAsDtsDuration OBJECT-TYPE
SYNTAX Unsigned32 (0|200..500)
UNITS "Milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object specifies the duration of the rpASDTS ring
pulse prior to the start of the transmission of the
FSK or DTMF containing the caller id information. It is
only used when pktcSigDevCidMode is set to a value of
\rpAsETS\.
The following table defines the default values
for this MIB object, depending on the signal type
(pktcSigDevCidMode), and MUST be followed:
Value of pktcSigDevCidMode Default value
duringringingETS any value (not used)
dtAsETS any value (not used)
rpAsETS 250
lrAsETS any value (not used)
lrETS any value (not used)
An attempt to set this object while the value of
pktcSigDevCidMode is not \rpAsETS\ will result in
an \inconsistentValue\ error.
The value of this MIB object MUST NOT persist across MTA
reboots."
REFERENCE
"ETSI-EN-300-659-1 Specification and Belgacom
BGC_D_48_9811_30_09_EDOC version 3.3"
DEFVAL { 250 }
View at oid-info.com
This object specifies the duration of the rpASDTS ring
pulse prior to the start of the transmission of the
FSK or DTMF containing the caller id information. It is
only used when pktcSigDevCidMode is set to a value of
'rpAsETS'.
The following table defines the default values
for this MIB object, depending on the signal type
(pktcSigDevCidMode), and MUST be followed:
Value of pktcSigDevCidMode Default value
duringringingETS any value (not used)
dtAsETS any value (not used)
rpAsETS 250
lrAsETS any value (not used)
lrETS any value (not used)
An attempt to set this object while the value of
pktcSigDevCidMode is not 'rpAsETS' will result in
an 'inconsistentValue' error.
The value of this MIB object MUST NOT persist across MTA
reboots.
Parsed from file rfc5098-PacketCable__IPCablecom-NCS-Signaling.mib.txt
Company: None
Module: PKTC-IETF-SIG-MIB
This object specifies the duration of the rpASDTS ring
pulse prior to the start of the transmission of the
FSK or DTMF containing the caller id information. It is
only used when pktcSigDevCidMode is set to a value of
'rpAsETS'.
The following table defines the default values
for this MIB object, depending on the signal type
(pktcSigDevCidMode), and MUST be followed:
Value of pktcSigDevCidMode Default value
duringringingETS any value (not used)
dtAsETS any value (not used)
rpAsETS 250
lrAsETS any value (not used)
lrETS any value (not used)
An attempt to set this object while the value of
pktcSigDevCidMode is not 'rpAsETS' will result in
an 'inconsistentValue' error.
The value of this MIB object MUST NOT persist across MTA
reboots.
Parsed from file PKTC-IETF-SIG-MIB.mib
Module: PKTC-IETF-SIG-MIB
Automatically extracted from RFC5098
pktcSigDevrpAsDtsDuration OBJECT-TYPE SYNTAX Unsigned32 (0|200..500) UNITS "Milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies the duration of the rpASDTS ring pulse prior to the start of the transmission of the FSK or DTMF containing the caller id information. It is only used when pktcSigDevCidMode is set to a value of 'rpAsETS'. The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevCidMode), and MUST be followed: Value of pktcSigDevCidMode Default value duringringingETS any value (not used) dtAsETS any value (not used) rpAsETS 250 lrAsETS any value (not used) lrETS any value (not used) An attempt to set this object while the value of pktcSigDevCidMode is not 'rpAsETS' will result in an 'inconsistentValue' error. The value of this MIB object MUST NOT persist across MTA reboots." REFERENCE "ETSI-EN-300-659-1 Specification and Belgacom BGC_D_48_9811_30_09_EDOC version 3.3" DEFVAL { 250 } ::= {pktcSigDevObjects 41 }
pktcSigDevrpAsDtsDuration OBJECT-TYPE SYNTAX Unsigned32 (0|200..500) UNITS "Milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION " This object specifies the duration of the rpASDTS ring pulse prior to the start of the transmission of the FSK or DTMF containing the caller id information. It is only used when pktcSigDevCidMode is set to a value of 'rpAsETS'. The following table defines the default values for this MIB object, depending on the signal type (pktcSigDevCidMode), and MUST be followed: Value of pktcSigDevCidMode Default value duringringingETS any value (not used) dtAsETS any value (not used) rpAsETS 250 lrAsETS any value (not used) lrETS any value (not used) An attempt to set this object while the value of pktcSigDevCidMode is not 'rpAsETS' will result in an 'inconsistentValue' error. The value of this MIB object MUST NOT persist across MTA reboots." REFERENCE "ETSI-EN-300-659-1 Specification and Belgacom BGC_D_48_9811_30_09_EDOC version 3.3" DEFVAL { 250 } ::= {pktcSigDevObjects 41 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.41.0 | pktcSigDevrpAsDtsDuration | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.169.1.1.1 | pktcSigDevCodecTable | 1 | 4 | pktcSigDevCodecTable OBJECT-TYPE SYNTAX SEQUENCE OF PktcSigDevCodecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "… |
| 1.3.6.1.2.1.169.1.1.2 | pktcSigDevEchoCancellation | 1 | 1 | This object specifies if the device is capable of echo cancellation. The MTA MUST set this MIB object to a value of true(1) if i… |
| 1.3.6.1.2.1.169.1.1.3 | pktcSigDevSilenceSuppression | 1 | 1 | This object specifies if the device is capable of silence suppression (as a result of Voice Activity Detection). The MTA MUST se… |
| 1.3.6.1.2.1.169.1.1.4 | pktcSigDevCidSigProtocol | 1 | 1 | This object is used to configure the subscriber-line protocol used for signaling on-hook caller id information. Different countri… |
| 1.3.6.1.2.1.169.1.1.5 | pktcSigDevR0Cadence | 1 | 1 | This object specifies ring cadence 0 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.6 | pktcSigDevR1Cadence | 1 | 1 | This object specifies ring cadence 1 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.7 | pktcSigDevR2Cadence | 1 | 1 | This object specifies ring cadence 2 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.8 | pktcSigDevR3Cadence | 1 | 1 | This object specifies ring cadence 3 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.9 | pktcSigDevR4Cadence | 1 | 1 | This object specifies ring cadence 4 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.10 | pktcSigDevR5Cadence | 1 | 1 | This object specifies ring cadence 5 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.11 | pktcSigDevR6Cadence | 1 | 1 | This object specifies ring cadence 6 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.12 | pktcSigDevR7Cadence | 1 | 1 | This object specifies ring cadence 7 (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.13 | pktcSigDevRgCadence | 1 | 1 | This object specifies ring cadence rg (a user-defined field). The value of this MIB object MUST NOT persist across MTA reboots. |
| 1.3.6.1.2.1.169.1.1.14 | pktcSigDevRsCadence | 1 | 1 | This object specifies ring cadence rs (a user-defined field). The MTA MUST reject any attempt to make this object repeatable. The… |
| 1.3.6.1.2.1.169.1.1.15 | pktcSigDefCallSigDscp | 1 | 1 | The default value used in the IP header for setting the Differentiated Services Code Point (DSCP) value for call signaling. The va… |
| 1.3.6.1.2.1.169.1.1.16 | pktcSigDefMediaStreamDscp | 1 | 1 | This object contains the default value used in the IP header for setting the Differentiated Services Code Point (DSCP) value for … |
| 1.3.6.1.2.1.169.1.1.17 | pktcSigCapabilityTable | 1 | 5 | This table describes the signaling types supported by this MTA. |
| 1.3.6.1.2.1.169.1.1.18 | pktcSigDefNcsReceiveUdpPort | 1 | 1 | This object contains the MTA User Datagram Protocol (UDP) receive port that is being used for NCS call signaling. This object sho… |
| 1.3.6.1.2.1.169.1.1.19 | pktcSigPowerRingFrequency | 1 | 1 | This object must only be provided via the configuration file during the provisioning process. The power ring frequency is the fr… |
| 1.3.6.1.2.1.169.1.1.20 | pktcSigPulseSignalTable | 1 | 7 | The Pulse signal table defines the pulse signal operation. There are nine types of international pulse signals, with each signal … |
| 1.3.6.1.2.1.169.1.1.21 | pktcSigDevCidMode | 1 | 1 | For on-hook caller id, pktcSigDevCidMode selects the method for representing and signaling caller identification. For the during… |
| 1.3.6.1.2.1.169.1.1.22 | pktcSigDevCidAfterRing | 1 | 1 | This object specifies the delay between the end of first ringing pattern and the start of the transmission of the FSK or DTMF con… |
| 1.3.6.1.2.1.169.1.1.23 | pktcSigDevCidAfterDTAS | 1 | 1 | This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FS… |
| 1.3.6.1.2.1.169.1.1.24 | pktcSigDevCidAfterRPAS | 1 | 1 | This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the F… |
| 1.3.6.1.2.1.169.1.1.25 | pktcSigDevRingAfterCID | 1 | 1 | This object specifies the delay between the end of the complete transmission of the FSK or DTMF containing the caller id informat… |
| 1.3.6.1.2.1.169.1.1.26 | pktcSigDevCidDTASAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS). This o… |
| 1.3.6.1.2.1.169.1.1.27 | pktcSigDevVmwiMode | 1 | 1 | For visual message waiting indicator (VMWI), pktcSigDevVmwiMode selects the alerting signal method. For the dtAsETS, rpAsETS, lr… |
| 1.3.6.1.2.1.169.1.1.28 | pktcSigDevVmwiAfterDTAS | 1 | 1 | This object specifies the delay between the end of the Dual Tone Alert Signal (DT-AS) and the start of the transmission of the FS… |
| 1.3.6.1.2.1.169.1.1.29 | pktcSigDevVmwiAfterRPAS | 1 | 1 | This object specifies the delay between the end of the Ring Pulse Alert Signal (RP-AS) and the start of the transmission of the F… |
| 1.3.6.1.2.1.169.1.1.30 | pktcSigDevVmwiDTASAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the Dual Tone Alert Signal (DT-AS) for VMWI… |
| 1.3.6.1.2.1.169.1.1.31 | pktcSigDevRingCadenceTable | 1 | 3 | Cadence rings are defined by the telco governing body for each country. The MTA must be able to support various ranges of cadenc… |
| 1.3.6.1.2.1.169.1.1.32 | pktcSigDevToneTable | 1 | 6 | The Tone Table defines the composition of tones and various tone operations. The definition of the tones callWaiting1 through call… |
| 1.3.6.1.2.1.169.1.1.33 | pktcSigDevMultiFreqToneTable | 1 | 12 | This MIB table defines the characteristics of tones with multiple frequencies. The constraints imposed on the tones by the MIB t… |
| 1.3.6.1.2.1.169.1.1.34 | pktcSigDevCidDelayAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This MIB object is … |
| 1.3.6.1.2.1.169.1.1.35 | pktcSigDevCidDtmfStartCode | 1 | 1 | This object identifies optional start codes used when the MIB object pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Diff… |
| 1.3.6.1.2.1.169.1.1.36 | pktcSigDevCidDtmfEndCode | 1 | 1 | This object identifies optional end codes used when the pktcSigDevCidSigProtocol is set to a value of 'dtmf(2)'. Different countri… |
| 1.3.6.1.2.1.169.1.1.37 | pktcSigDevVmwiSigProtocol | 1 | 1 | This object identifies the subscriber line protocol used for signaling the information on Visual Message Waiting Indicator (VMWI)… |
| 1.3.6.1.2.1.169.1.1.38 | pktcSigDevVmwiDelayAfterLR | 1 | 1 | This object specifies the delay between the end of the Line Reversal and the start of the FSK or DTMF signal. This object is only… |
| 1.3.6.1.2.1.169.1.1.39 | pktcSigDevVmwiDtmfStartCode | 1 | 1 | This object identifies optional start codes used when the pktcSigDevVmwiSigProtocol is set to a value of 'dtmf(2)'. Different co… |
| 1.3.6.1.2.1.169.1.1.40 | pktcSigDevVmwiDtmfEndCode | 1 | 1 | This object identifies an optional end code used when the pktcSigDevVmwiSigProtocol is set to a value of 'dtmf(2)'. Different co… |