t11FcSpPoNaSwMembFlags OBJECT-TYPE
SYNTAX BITS {
staticDomainID(0),
insistentDomainID(1),
serialPortsAccess(2),
physicalPortsAccess(3),
managerRole(4)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Configurable options in respect to the administration
of Policy Objects at this Switch:
\staticDomainID\ - the Switch uses the \Static
Domain_IDs behavior\ (as defined in FC-SW-4) when this bit
is set. This bit should have the same setting for all
Switches in a Fabric\s Switch Membership List Object, or
else the Fabric will partition. If this bit is set,
the \insistentDomainID\ bit must not be set.
\insistentDomainID\ - if this bit is set, the Switch
uses the \Insistent Domain_IDs behavior\ (as defined in
FC-SW-4), and the \staticDomainID\ bit must not be set.
\serialPortsAccess\ - the Switch allows management
through serial ports when and only when this bit is set.
\physicalPortsAccess\ - the Switch allows management
through the physical panel when and only when this bit
is set.
\managerRole\ - the Switch is allowed to change
the Fabric Policy configuration (on receipt of any of the
EACA, ESFC, EUFC, ACA, SFC, or UFC SW_ILSs) if this bit is
set."
REFERENCE
"- ANSI INCITS 426-2007, T11/Project 1570-D,
Fibre Channel - Security Protocols (FC-SP),
February 2007, section 7.1.4.1 and table 112."
View at oid-info.com
Configurable options in respect to the administration
of Policy Objects at this Switch:
'staticDomainID' - the Switch uses the 'Static
Domain_IDs behavior' (as defined in FC-SW-4) when this bit
is set. This bit should have the same setting for all
Switches in a Fabric's Switch Membership List Object, or
else the Fabric will partition. If this bit is set,
the 'insistentDomainID' bit must not be set.
'insistentDomainID' - if this bit is set, the Switch
uses the 'Insistent Domain_IDs behavior' (as defined in
FC-SW-4), and the 'staticDomainID' bit must not be set.
'serialPortsAccess' - the Switch allows management
through serial ports when and only when this bit is set.
'physicalPortsAccess' - the Switch allows management
through the physical panel when and only when this bit
is set.
'managerRole' - the Switch is allowed to change
the Fabric Policy configuration (on receipt of any of the
EACA, ESFC, EUFC, ACA, SFC, or UFC SW_ILSs) if this bit is
set.
Parsed from file rfc5324-Fibre-Channel-Security-Protocols-FC-SP.mib-4.txt
Company: ietf_rfcs
Module: T11-FC-SP-POLICY-MIB
Automatically extracted from RFC5324
t11FcSpPoNaSwMembFlags OBJECT-TYPE SYNTAX BITS { staticDomainID(0), insistentDomainID(1), serialPortsAccess(2), physicalPortsAccess(3), managerRole(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Configurable options in respect to the administration of Policy Objects at this Switch: 'staticDomainID' - the Switch uses the 'Static Domain_IDs behavior' (as defined in FC-SW-4) when this bit is set. This bit should have the same setting for all Switches in a Fabric's Switch Membership List Object, or else the Fabric will partition. If this bit is set, the 'insistentDomainID' bit must not be set. 'insistentDomainID' - if this bit is set, the Switch uses the 'Insistent Domain_IDs behavior' (as defined in FC-SW-4), and the 'staticDomainID' bit must not be set. 'serialPortsAccess' - the Switch allows management through serial ports when and only when this bit is set. 'physicalPortsAccess' - the Switch allows management through the physical panel when and only when this bit is set. 'managerRole' - the Switch is allowed to change the Fabric Policy configuration (on receipt of any of the EACA, ESFC, EUFC, ACA, SFC, or UFC SW_ILSs) if this bit is set." REFERENCE "- ANSI INCITS 426-2007, T11/Project 1570-D, Fibre Channel - Security Protocols (FC-SP), February 2007, section 7.1.4.1 and table 112." ::= { t11FcSpPoNaSwMembEntry 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.178.1.3.3.1.1 | t11FcSpPoNaSwMembSwitchNameType | 0 | 0 | If the value of this object is 'nodeName' or 'restrictedNodeName', then the combination of this object and t11FcSpPoNaSwMembSwitc… |
| 1.3.6.1.2.1.178.1.3.3.1.2 | t11FcSpPoNaSwMembSwitchName | 0 | 0 | If the value of t11FcSpPoSwMembSwitchNameType is 'wildcard' or 'restrictedWildcard', this object has the value '0000000000000000'… |
| 1.3.6.1.2.1.178.1.3.3.1.4 | t11FcSpPoNaSwMembDomainID | 0 | 0 | The Domain_ID to be used when either the 'staticDomainID' bit or the 'insistentDomainID' bit is set in the corresponding value of… |
| 1.3.6.1.2.1.178.1.3.3.1.5 | t11FcSpPoNaSwMembPolicyDataRole | 0 | 0 | The role of the Switch in terms of which Policy data it retains/maintains: 'client' - the Switch operates as a Client Switch. A Cl… |
| 1.3.6.1.2.1.178.1.3.3.1.6 | t11FcSpPoNaSwMembAuthBehaviour | 0 | 0 | The authentication behaviour of the Switch: 'mustAuthenticate' - if this bit is set, all connections between this Switch and neig… |
| 1.3.6.1.2.1.178.1.3.3.1.7 | t11FcSpPoNaSwMembAttribute | 0 | 0 | The name of a non-active Attribute Policy Object that is defined for this Switch. The zero-length string indicates that no non-a… |
| 1.3.6.1.2.1.178.1.3.3.1.8 | t11FcSpPoNaSwMembRowStatus | 0 | 0 | The status of this row. Values of object instances within the row can be modified at any time. A row cannot exist unless there i… |