phivLineReceiveBuffs OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This value represents the number of receive buffers
reserved for the line. It is a decimal number in
the range 0-65535. 0 is supported for those vendors
that do not reserve buffers on a per line basis and
use a pool of buffers that can be used by any line."
View at oid-info.com
This value represents the number of receive buffers
reserved for the line. It is a decimal number in
the range 0-65535. 0 is supported for those vendors
that do not reserve buffers on a per line basis and
use a pool of buffers that can be used by any line.
Parsed from file rfc1289.mib.txt
Company: None
Module: RFC1289-phivMIB
The name of the type of modem connected to this line.
Parsed from file SHIVA-LINE-MIB.mib
Module: SHIVA-LINE-MIB
Automatically extracted from RFC1559
phivLineReceiveBuffs OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This value represents the number of receive buffers reserved for the line. It is a decimal number in the range 0-65535. 0 is supported for those vendors that do not reserve buffers on a per line basis and use a pool of buffers that can be used by any line." ::= { phivLineEntry 7 }
serialLineModemName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The name of the type of modem connected to this line." ::= { serialLineEntry 7 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.18.12.1.1.1 | phivLineIndex, serialLineIndex | 0 | 0 | Serial line number, densely numbered starting with 1. |
1.3.6.1.2.1.18.12.1.1.2 | phivLineName, serialLineSlot | 0 | 0 | The name of the line on this row of the table. |
1.3.6.1.2.1.18.12.1.1.3 | phivLineState, serialLineChan | 0 | 0 | Logical channel number on physical slot. BRI cards have two channels, all others have one. |
1.3.6.1.2.1.18.12.1.1.4 | phivLineSubstate, serialLineLogIndex | 0 | 0 | Logical line number, the number used in the device name (ifDesc) SerialN. Skips over empty slots. |
1.3.6.1.2.1.18.12.1.1.5 | phivLineService, serialLinePools | 0 | 0 | The names of the pools that this line is in, comma-seperated. |
1.3.6.1.2.1.18.12.1.1.6 | phivLineDevice, serialLineStatus | 0 | 0 | This value represents the Physical Link device to be used on the line. |
1.3.6.1.2.1.18.12.1.1.8 | phivLineProtocol, serialLineAnswerInit | 0 | 0 | The initialization string to put the modem in auto-answer mode. |
1.3.6.1.2.1.18.12.1.1.9 | phivLineServiceTimer, serialLineInitRate | 0 | 0 | The rate in bits per second at which to initialize the line. |
1.3.6.1.2.1.18.12.1.1.10 | phivLineMaxBlock, serialLineInitFlow | 0 | 0 | The flow control setting to initialize the line with. |
1.3.6.1.2.1.18.12.1.1.11 | serialLineSignals | 0 | 0 | The current status of control signals on this line, as the sum of the following bits; 0 Ready To Send 1 Clear To Send 2 Data Set Re… |
1.3.6.1.2.1.18.12.1.1.12 | serialLineMode | 0 | 0 | The tranmission mode currently in use on this line. |
1.3.6.1.2.1.18.12.1.1.13 | serialLineInitString | 0 | 0 | The initialization string to put the modem in dial mode. |
1.3.6.1.2.1.18.12.1.1.14 | serialLineConnSpeed | 0 | 0 | Line connection speed. |
1.3.6.1.2.1.18.12.1.1.15 | serialLineSwitch | 0 | 0 | ISDN switch type configured on this line. |
1.3.6.1.2.1.18.12.1.1.16 | serialLineRadap | 0 | 0 | ISDN rate adaptation type. |
1.3.6.1.2.1.18.12.1.1.17 | serialLineTransCap | 0 | 0 | Type of ISDN service on this line |
1.3.6.1.2.1.18.12.1.1.18 | serialLineSpid | 0 | 0 | ISDN Service Profile ID. |
1.3.6.1.2.1.18.12.1.1.19 | serialLineErrorCorr | 0 | 0 | error correction protocol on this line. |
1.3.6.1.2.1.18.12.1.1.20 | serialLineDataCompr | 0 | 0 | line data compression type. |
1.3.6.1.2.1.18.12.1.1.21 | serialLineEQM | 0 | 0 | line signal quality. |
1.3.6.1.2.1.18.12.1.1.22 | serialLineAGC | 0 | 0 | line signal strength. |
1.3.6.1.2.1.18.12.1.1.23 | serialLineStatTab | 0 | 0 | Statistics table that pertains to this line. |
1.3.6.1.2.1.18.12.1.1.24 | serialLineStatIndex | 0 | 0 | Index into statistics table. |
1.3.6.1.2.1.18.12.1.1.25 | serialLineType | 0 | 0 | Type of line. |
1.3.6.1.2.1.18.12.1.1.26 | serialLineIfIndex | 0 | 0 | The ifIndex of this serial line. |