On a LanRover or NetModem, this is the same as the
sessLineChan. Range of values: (1..2).
On a LanRover Access Switch, for analog sessLineType
calls (dmc sessLineType), sessLineLogChan is the
modem on which this session is created. For digital
sessLineType calls, sessLineLogChan is the telephone trunk,
the same value as the sessLinePhysPort. Range of
values: (1..36) for analog calls, (1..4) for digital calls.
On LanRover Access Switches, if the current session was
created over a VPDN interface, the sessLineLogChan value is
not applicable, therefore, this value should be zero.
Parsed from file SHIVA-SESS-MIB.mib
Module: SHIVA-SESS-MIB
sessLineLogChan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "On a LanRover or NetModem, this is the same as the sessLineChan. Range of values: (1..2). On a LanRover Access Switch, for analog sessLineType calls (dmc sessLineType), sessLineLogChan is the modem on which this session is created. For digital sessLineType calls, sessLineLogChan is the telephone trunk, the same value as the sessLinePhysPort. Range of values: (1..36) for analog calls, (1..4) for digital calls. On LanRover Access Switches, if the current session was created over a VPDN interface, the sessLineLogChan value is not applicable, therefore, this value should be zero." ::= { sessLineEntry 27 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.18.3.3.1.1 | sessLineLine | 0 | 0 | Line number on which a session exists. May not be only line in session. |
| 1.3.6.1.2.1.18.3.3.1.2 | sessLineSession | 0 | 0 | The value of sessIdentifier for the session using this line. |
| 1.3.6.1.2.1.18.3.3.1.3 | sessLineDialBackNumber | 0 | 0 | The dialback phone number used by the connection. |
| 1.3.6.1.2.1.18.3.3.1.4 | sessLinePacketSize | 0 | 0 | The maximum packet sized allowed on this line. |
| 1.3.6.1.2.1.18.3.3.1.5 | sessLineLineMode | 0 | 0 | The line type on this connection. |
| 1.3.6.1.2.1.18.3.3.1.6 | sessLineAsyncOverruns | 0 | 0 | The number of overruns seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.7 | sessLineAsyncParityErrs | 0 | 0 | The number of async parity errors seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.8 | sessLineAsyncFrameErrs | 0 | 0 | The number of async framing errors seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.9 | sessLineAsyncBreakErrs | 0 | 0 | The number of async break errors seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.10 | sessLineAsyncFcsErrs | 0 | 0 | The number of async checksum errors seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.11 | sessLineAsyncTooBig | 0 | 0 | The number of async too large packets seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.12 | sessLineAsyncPktAbort | 0 | 0 | The number of async packet abort indications seen on this connection. |
| 1.3.6.1.2.1.18.3.3.1.13 | sessLineSyncFcsErrs | 0 | 0 | The number of sync FCS errors in sync mode on this connection. |
| 1.3.6.1.2.1.18.3.3.1.14 | sessLineSyncOverruns | 0 | 0 | The number of sync receive overruns on this connection. |
| 1.3.6.1.2.1.18.3.3.1.15 | sessLineSyncUnderruns | 0 | 0 | The number of sync transmit underruns on this connection. |
| 1.3.6.1.2.1.18.3.3.1.16 | sessLineSyncFrAborts | 0 | 0 | The number of sync frame aborts on this connection. |
| 1.3.6.1.2.1.18.3.3.1.17 | sessLineSyncIntframes | 0 | 0 | The number of sync interrupted frames on this connection. |
| 1.3.6.1.2.1.18.3.3.1.18 | sessLinePktsIn | 0 | 0 | The number of link-level packets received on this connection. |
| 1.3.6.1.2.1.18.3.3.1.19 | sessLinePktsOut | 0 | 0 | The number of link-level packets sent on this connection. |
| 1.3.6.1.2.1.18.3.3.1.20 | sessLineSlot | 0 | 0 | On a LanRover or NetModem, sessLineSlot is the slot number of the interface on which the session is created. Empty slots are skip… |
| 1.3.6.1.2.1.18.3.3.1.21 | sessLineChan | 0 | 0 | On a LanRover or NetModem, sessLineChan is the logical channel number on the interface on which the session is created. BRI card… |
| 1.3.6.1.2.1.18.3.3.1.22 | sessLineType | 0 | 0 | Type of line for this session. This duplicates serialLineType of the index sessLineLine. |
| 1.3.6.1.2.1.18.3.3.1.23 | sessLineIfIndex | 0 | 0 | The value of ifIndex for this interface. |
| 1.3.6.1.2.1.18.3.3.1.24 | sessLineSpeed | 0 | 0 | Speed in bits/second that the modem (if any) on this call is operating at. |
| 1.3.6.1.2.1.18.3.3.1.25 | sessLinePhysPort | 0 | 0 | On a LanRover or NetModem, sessLinePhysPort is 1 since there is never more than 1 physical port per physical slot. Range of value… |
| 1.3.6.1.2.1.18.3.3.1.26 | sessLineLogSlot | 0 | 0 | On a LanRover or NetModem, sessLineLogSlot is the same as the sessLineSlot. On a LanRover Access Switch, for analog sessLineType c… |