phivCircuitCommonType OBJECT-TYPE
SYNTAX INTEGER {
ddcmp-point (1),
ddcmp-control (2),
ddcmp-tributary (3),
x25 (4),
ddcmp-dmc (5),
ethernet (6),
ci (7),
qp2-dte20 (8),
bisync (9),
other (14),
fddi (15)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Represents the type of the circuit. For X.25 circuits,
the value must be set to X25. For DDCMP and Ethernet
circuits it is read only and is the same value as the
protocol of the associated line.
NOTE: Values 1 - 5 are incremented by one compared to the
standard DECnet values in order to maintain compliance
with RFC 1155."
View at oid-info.com
Represents the type of the circuit. For X.25 circuits,
the value must be set to X25. For DDCMP and Ethernet
circuits it is read only and is the same value as the
protocol of the associated line.
NOTE: Values 1 - 5 are incremented by one compared to the
standard DECnet values in order to maintain compliance
with RFC 1155.
Parsed from file rfc1289.mib.txt
Company: None
Module: RFC1289-phivMIB
Represents the type of the circuit. For X.25 circuits,
the value must be set to X25. For DDCMP and Ethernet
circuits it is read only and is the same value as the
protocol of the associated line.
NOTE: Values 1 - 5 are incremented by one compared to the
standard DECnet values in order to maintain compliance
with RFC 1155.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
Automatically extracted from RFC1559
phivCircuitCommonType OBJECT-TYPE SYNTAX INTEGER { ddcmp-point (1), ddcmp-control (2), ddcmp-tributary (3), x25 (4), ddcmp-dmc (5), ethernet (6), ci (7), qp2-dte20 (8), bisync (9), other (14), fddi (15) } ACCESS read-only STATUS mandatory DESCRIPTION "Represents the type of the circuit. For X.25 circuits, the value must be set to X25. For DDCMP and Ethernet circuits it is read only and is the same value as the protocol of the associated line. NOTE: Values 1 - 5 are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155." ::= { phivCircuitParametersEntry 7 }
phivCircuitCommonType OBJECT-TYPE SYNTAX INTEGER { ddcmp-point (1), ddcmp-control (2), ddcmp-tributary (3), x25 (4), ddcmp-dmc (5), ethernet (6), ci (7), qp2-dte20 (8), bisync (9), other (14), fddi (15) } ACCESS read-only STATUS mandatory DESCRIPTION "Represents the type of the circuit. For X.25 circuits, the value must be set to X25. For DDCMP and Ethernet circuits it is read only and is the same value as the protocol of the associated line. NOTE: Values 1 - 5 are incremented by one compared to the standard DECnet values in order to maintain compliance with RFC 1155." ::= { phivCircuitParametersEntry 7 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.18.6.1.1.1 | phivCircuitIndex | 0 | 0 | A unique index value for each known circuit. |
| 1.3.6.1.2.1.18.6.1.1.2 | phivCircuitLineIndex | 0 | 0 | The line on which this circuit is active. This is the same as the IfIndex. |
| 1.3.6.1.2.1.18.6.1.1.3 | phivCircuitCommonState | 0 | 0 | This value represents the circuit's Network Management operational state. NOTE: These values are incremented by one compared to t… |
| 1.3.6.1.2.1.18.6.1.1.4 | phivCircuitCommonSubState | 0 | 0 | This value represents the circuit's Network Management operational and service substate. NOTE: These values are incremented by on… |
| 1.3.6.1.2.1.18.6.1.1.5 | phivCircuitCommonName | 0 | 0 | The name of the circuit entry in the table, for example, SVA-0 or in a level 2 router ASYNC-8 or ETHER-1). |
| 1.3.6.1.2.1.18.6.1.1.6 | phivCircuitExecRecallTimer | 0 | 0 | This parameter represents the minimum number of seconds to wait before restarting the circuit. A value of 0 indicates not timer … |
| 1.3.6.1.2.1.18.6.1.1.8 | phivCircuitService | 0 | 0 | This value indicates whether or not Network Management allows service operations on a circuit. The values for service-control are… |
| 1.3.6.1.2.1.18.6.1.1.9 | phivCircuitExecCost | 0 | 0 | This value represents the routing cost of the circuit. Routing sends messages along the path between two nodes having the smalles… |
| 1.3.6.1.2.1.18.6.1.1.10 | phivCircuitExecHelloTimer | 0 | 0 | This value determines the frequency of Routing Hello messages sent to the adjacent node on the circuit. |