mgmdRouterInterfaceLastMemberQueryCount OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Represents the number of group-specific and group-and-
source-specific queries sent by the router before it assumes
there are no local members."
View at oid-info.com
Represents the number of group-specific and group-and-
source-specific queries sent by the router before it assumes
there are no local members.
Parsed from file MGMD-STD-MIB.mib.txt
Company: huawei
Module: MGMD-STD-MIB
Automatically extracted from RFC5519
mgmdRouterInterfaceLastMemberQueryCount OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the number of group-specific and group-and- source-specific queries sent by the router before it assumes there are no local members." ::= { mgmdRouterInterfaceEntry 16 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.185.1.2.1.1 | mgmdRouterInterfaceIfIndex | 0 | 0 | The ifIndex value of the interface for which IGMP or MLD is enabled. The table is indexed by the ifIndex value and the InetAddre… |
1.3.6.1.2.1.185.1.2.1.2 | mgmdRouterInterfaceQuerierType | 0 | 0 | The address type of this interface. This entry along with the ifIndex value acts as the index to the mgmdRouterInterface table. … |
1.3.6.1.2.1.185.1.2.1.3 | mgmdRouterInterfaceQuerier | 0 | 0 | The address of the IGMP or MLD Querier on the IP subnet to which this interface is attached. The InetAddressType, e.g., IPv4 or … |
1.3.6.1.2.1.185.1.2.1.4 | mgmdRouterInterfaceQueryInterval | 0 | 0 | The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. |
1.3.6.1.2.1.185.1.2.1.5 | mgmdRouterInterfaceStatus | 0 | 0 | The activation of a row enables the router side of IGMP or MLD on the interface. The destruction of a row disables the router si… |
1.3.6.1.2.1.185.1.2.1.6 | mgmdRouterInterfaceVersion | 0 | 0 | The version of MGMD that is running on this interface. Value 1 applies to IGMPv1 routers only. Value 2 applies to IGMPv2 and MLD… |
1.3.6.1.2.1.185.1.2.1.7 | mgmdRouterInterfaceQueryMaxResponseTime | 0 | 0 | The maximum query response interval advertised in MGMDv2 or IGMPv3 queries on this interface. |
1.3.6.1.2.1.185.1.2.1.8 | mgmdRouterInterfaceQuerierUpTime | 0 | 0 | The time since mgmdRouterInterfaceQuerier was last changed. |
1.3.6.1.2.1.185.1.2.1.9 | mgmdRouterInterfaceQuerierExpiryTime | 0 | 0 | The amount of time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of th… |
1.3.6.1.2.1.185.1.2.1.10 | mgmdRouterInterfaceWrongVersionQueries | 0 | 0 | The number of general queries received whose IGMP or MLD version does not match the equivalent mgmdRouterInterfaceVersion, over t… |
1.3.6.1.2.1.185.1.2.1.11 | mgmdRouterInterfaceJoins | 0 | 0 | The number of times a group membership has been added on this interface, that is, the number of times an entry for this interface… |
1.3.6.1.2.1.185.1.2.1.12 | mgmdRouterInterfaceProxyIfIndex | 0 | 0 | Some devices implement a form of IGMP or MLD proxying whereby memberships learned on the interface represented by this row cause … |
1.3.6.1.2.1.185.1.2.1.13 | mgmdRouterInterfaceGroups | 0 | 0 | The current number of entries for this interface in the mgmdRouterCacheTable. |
1.3.6.1.2.1.185.1.2.1.14 | mgmdRouterInterfaceRobustness | 0 | 0 | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustn… |
1.3.6.1.2.1.185.1.2.1.15 | mgmdRouterInterfaceLastMemberQueryInterval | 0 | 0 | The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave … |
1.3.6.1.2.1.185.1.2.1.17 | mgmdRouterInterfaceStartupQueryCount | 0 | 0 | Represents the number of Queries sent out on startup, separated by the Startup Query Interval. |
1.3.6.1.2.1.185.1.2.1.18 | mgmdRouterInterfaceStartupQueryInterval | 0 | 0 | This variable represents the interval between General Queries sent by a Querier on startup. |