ospfv3ExitOverflowInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The number of seconds that, after entering
Overflow state, a router will attempt to leave
Overflow state. This allows the router to again
originate non-default, AS-External-LSAs. When
set to 0, the router will not leave Overflow
state until restarted.
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage."
View at oid-info.com
The number of seconds that, after entering
Overflow state, a router will attempt to leave
Overflow state. This allows the router to again
originate non-default, AS-External-LSAs. When
set to 0, the router will not leave Overflow
state until restarted.
This object is persistent, and when written, the
entity SHOULD save the change to non-volatile
storage.
Automatically extracted from RFC5643
ospfv3ExitOverflowInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The number of seconds that, after entering Overflow state, a router will attempt to leave Overflow state. This allows the router to again originate non-default, AS-External-LSAs. When set to 0, the router will not leave Overflow state until restarted. This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage." ::= { ospfv3GeneralGroup 12 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.191.1.1.1 | ospfv3RouterId | 0 | 0 | A 32-bit unsigned integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to th… |
| 1.3.6.1.2.1.191.1.1.2 | ospfv3AdminStatus | 0 | 0 | The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one… |
| 1.3.6.1.2.1.191.1.1.3 | ospfv3VersionNumber | 0 | 0 | The version number of OSPF for IPv6 is 3. |
| 1.3.6.1.2.1.191.1.1.4 | ospfv3AreaBdrRtrStatus | 0 | 0 | A flag to denote whether this router is an area border router. The value of this object is true (1) when the router is an area b… |
| 1.3.6.1.2.1.191.1.1.5 | ospfv3ASBdrRtrStatus | 0 | 0 | A flag to note whether this router is configured as an Autonomous System border router. This object is persistent, and when writt… |
| 1.3.6.1.2.1.191.1.1.6 | ospfv3AsScopeLsaCount | 0 | 0 | The number of AS-scope (e.g., AS-External) link state advertisements in the link state database. |
| 1.3.6.1.2.1.191.1.1.7 | ospfv3AsScopeLsaCksumSum | 0 | 0 | The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. Thi… |
| 1.3.6.1.2.1.191.1.1.8 | ospfv3OriginateNewLsas | 0 | 0 | The number of new link state advertisements that have been originated. This number is incremented each time the router originate… |
| 1.3.6.1.2.1.191.1.1.9 | ospfv3RxNewLsas | 0 | 0 | The number of link state advertisements received that are determined to be new instantiations. This number does not include newer… |
| 1.3.6.1.2.1.191.1.1.10 | ospfv3ExtLsaCount | 0 | 0 | The number of External (LS type 0x4005) in the link state database. |
| 1.3.6.1.2.1.191.1.1.11 | ospfv3ExtAreaLsdbLimit | 0 | 0 | The maximum number of non-default AS-external-LSA entries that can be stored in the link state database. If the value is -1, the… |
| 1.3.6.1.2.1.191.1.1.13 | ospfv3DemandExtensions | 0 | 0 | The router's support for demand circuits. The value of this object is true (1) when demand circuits are supported. This object is … |
| 1.3.6.1.2.1.191.1.1.14 | ospfv3ReferenceBandwidth | 0 | 0 | Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBP… |
| 1.3.6.1.2.1.191.1.1.15 | ospfv3RestartSupport | 0 | 0 | The router's support for OSPF graceful restart. Options include no restart support, only planned restarts, or both planned and un… |
| 1.3.6.1.2.1.191.1.1.16 | ospfv3RestartInterval | 0 | 0 | Configured OSPF graceful restart timeout interval. This object is persistent, and when written, the entity SHOULD save the change… |
| 1.3.6.1.2.1.191.1.1.17 | ospfv3RestartStrictLsaChecking | 0 | 0 | Indicates if strict LSA checking is enabled for graceful restart. A value of true (1) indicates that strict LSA checking is enab… |
| 1.3.6.1.2.1.191.1.1.18 | ospfv3RestartStatus | 0 | 0 | The current status of OSPF graceful restart capability. |
| 1.3.6.1.2.1.191.1.1.19 | ospfv3RestartAge | 0 | 0 | Remaining time in the current OSPF graceful restart interval. |
| 1.3.6.1.2.1.191.1.1.20 | ospfv3RestartExitReason | 0 | 0 | Describes the outcome of the last attempt at a graceful restart. none: no restart has yet been attempted. inProgress: … |
| 1.3.6.1.2.1.191.1.1.21 | ospfv3NotificationEnable | 0 | 0 | This object provides a coarse level of control over the generation of OSPFv3 notifications. If this object is set to true (1), th… |
| 1.3.6.1.2.1.191.1.1.22 | ospfv3StubRouterSupport | 0 | 0 | The router's support for stub router functionality. An object value of true (1) indicates that stub router functionality is supp… |
| 1.3.6.1.2.1.191.1.1.23 | ospfv3StubRouterAdvertisement | 0 | 0 | This object controls the advertisement of stub LSAs by the router. The value doNotAdvertise (1) will result in the advertisement… |
| 1.3.6.1.2.1.191.1.1.24 | ospfv3DiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one of this MIB's counters suffered a discontinuity. If no such di… |
| 1.3.6.1.2.1.191.1.1.25 | ospfv3RestartTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which the ospfv3RestartExitReason was updated. |