nhdpHystRejectQuality OBJECT-TYPE
SYNTAX Float32TC
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"nhdpHystRejectQuality corresponds to
HYST_REJECT of NHDP and represents the
link quality threshold below which a
link becomes unusable, if it was not
already so.
Guidance for setting this object may be found
in Section 5 of the NHDP specification (RFC 6130),
which indicates that:
o 0 <= nhdpHystRejectQuality
<= nhdpHystAcceptQuality <= 1.0
The default value for this object is 0.0. According to
RFC 6340:
Since these textual conventions are defined in terms
of the OCTET STRING type, the SMI\s mechanisms for
formally setting range constraints are not available.
MIB designers using these textual conventions will need
to use DESCRIPTION clauses to spell out any applicable
range constraints beyond those implied by the underlying
IEEE types.
Therefore, this object does not have a DEFVAL clause."
REFERENCE
"Section 5 on Protocol Parameters and
Constraints of RFC 6130 - Mobile Ad Hoc Network
(MANET) Neighborhood Discovery Protocol (NHDP),
Clausen, T., Dearlove, C., and J. Dean, April 2011"
-- DEFVAL { 0.0 } see DESCRIPTION
View at oid-info.com
Automatically extracted from IETF RFC6779
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.213.1.1.1.1.2 | nhdpIfName | 0 | 0 | nhdpIfName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The textual name of the interfac… |
| 1.3.6.1.2.1.213.1.1.1.1.3 | nhdpIfStatus | 0 | 0 | nhdpIfStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpIfStatus indicates whether th… |
| 1.3.6.1.2.1.213.1.1.1.1.4 | nhdpHelloInterval | 0 | 0 | nhdpHelloInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpHel… |
| 1.3.6.1.2.1.213.1.1.1.1.5 | nhdpHelloMinInterval | 0 | 0 | nhdpHelloMinInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdp… |
| 1.3.6.1.2.1.213.1.1.1.1.6 | nhdpRefreshInterval | 0 | 0 | nhdpRefreshInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpR… |
| 1.3.6.1.2.1.213.1.1.1.1.7 | nhdpLHoldTime | 0 | 0 | nhdpLHoldTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpLHoldTi… |
| 1.3.6.1.2.1.213.1.1.1.1.8 | nhdpHHoldTime | 0 | 0 | nhdpHHoldTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpHHoldTi… |
| 1.3.6.1.2.1.213.1.1.1.1.9 | nhdpHystAcceptQuality | 0 | 0 | nhdpHystAcceptQuality OBJECT-TYPE SYNTAX Float32TC MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpHystAcceptQuality cor… |
| 1.3.6.1.2.1.213.1.1.1.1.11 | nhdpInitialQuality | 0 | 0 | nhdpInitialQuality OBJECT-TYPE SYNTAX Float32TC MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpInitialQuality correspon… |
| 1.3.6.1.2.1.213.1.1.1.1.12 | nhdpInitialPending | 0 | 0 | nhdpInitialPending OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpInitialPending correspo… |
| 1.3.6.1.2.1.213.1.1.1.1.13 | nhdpHpMaxJitter | 0 | 0 | nhdpHpMaxJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpHpMax… |
| 1.3.6.1.2.1.213.1.1.1.1.14 | nhdpHtMaxJitter | 0 | 0 | nhdpHtMaxJitter OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "nhdpHtMax… |
| 1.3.6.1.2.1.213.1.1.1.1.15 | nhdpIfRowStatus | 0 | 0 | nhdpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object permits management … |