rbridgeBasePortState OBJECT-TYPE
SYNTAX INTEGER {
uninhibited(1),
portInhibited(2),
vlanInhibited(3),
disabled(4),
broken(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port\s current state. If the entire port is
inhibited, its state is portInhibited(2). If specific VLANs
are inhibited, the state is vlanInhibited(3), and
rbridgeVlanPortTable will tell which VLANs are inhibited.
For ports that are disabled (see rbridgeBasePortDisable),
this object will have a value of disabled(4). If the
RBridge has detected a port that is malfunctioning, it will
place that port into the broken(5) state."
REFERENCE
"RFC 6325, Section 4.2.4.3"
View at oid-info.com
Automatically extracted from IETF RFC6850
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.214.1.1.9.1.2 | rbridgeBasePortIfIndex | 0 | 0 | rbridgeBasePortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the inst… |
1.3.6.1.2.1.214.1.1.9.1.3 | rbridgeBasePortDisable | 0 | 0 | rbridgeBasePortDisable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable port bit. When t… |
1.3.6.1.2.1.214.1.1.9.1.4 | rbridgeBasePortTrunkPort | 0 | 0 | rbridgeBasePortTrunkPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "End-station service di… |
1.3.6.1.2.1.214.1.1.9.1.5 | rbridgeBasePortAccessPort | 0 | 0 | rbridgeBasePortAccessPort OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "TRILL traffic disable… |
1.3.6.1.2.1.214.1.1.9.1.6 | rbridgeBasePortP2pHellos | 0 | 0 | rbridgeBasePortP2pHellos OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Use point-to-point (P2… |
1.3.6.1.2.1.214.1.1.9.1.8 | rbridgeBasePortInhibitionTime | 0 | 0 | rbridgeBasePortInhibitionTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "T… |
1.3.6.1.2.1.214.1.1.9.1.9 | rbridgeBasePortDisableLearning | 0 | 0 | rbridgeBasePortDisableLearning OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Disable learning… |
1.3.6.1.2.1.214.1.1.9.1.10 | rbridgeBasePortDesiredDesigVlan | 0 | 0 | rbridgeBasePortDesiredDesigVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "The VLAN that a Des… |
1.3.6.1.2.1.214.1.1.9.1.11 | rbridgeBasePortDesigVlan | 0 | 0 | rbridgeBasePortDesigVlan OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN being used on this… |
1.3.6.1.2.1.214.1.1.9.1.12 | rbridgeBasePortStpRoot | 0 | 0 | rbridgeBasePortStpRoot OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of th… |
1.3.6.1.2.1.214.1.1.9.1.13 | rbridgeBasePortStpRootChanges | 0 | 0 | rbridgeBasePortStpRootChanges OBJECT-TYPE SYNTAX Counter32 UNITS "changes" MAX-ACCESS read-only STATUS current DESCRIPTION "The… |
1.3.6.1.2.1.214.1.1.9.1.14 | rbridgeBasePortStpWiringCloset | 0 | 0 | rbridgeBasePortStpWiringCloset OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-write STATUS current DESCRIPTION "The Bridge ID to b… |