rptrNonDisruptTest OBJECT-TYPE
SYNTAX INTEGER {
noSelftest(1),
selftest(2)
}
MAX-ACCESS read-write
STATUS deprecated
DESCRIPTION
"********* THIS OBJECT IS DEPRECATED **********
Setting this object to selftest(2) causes the
repeater to perform a agent-specific, non-
disruptive self-test that has the following
characteristics: a) The nature of the tests is
not specified. b) The test does not change the
state of the repeater or management information
about the repeater. c) The test does not inject
packets onto any segment. d) The test does not
prevent the relay of any packets. e) The test
does not interfere with management functions.
After performing this test, the agent will update
the repeater health information (including
rptrOperStatus and rptrHealthtext) and send a
rptrHealth trap.
Note that this definition allows returning an
okay result after doing a trivial test.
Setting this object to noSelftest(1) has no
effect. The agent will always return the value
noSelftest(1) when this object is read."
REFERENCE
"[IEEE 802.3 Mgt], 30.4.1.2.2,
acExecuteNonDisruptiveSelftest."
View at oid-info.com
Setting this variable to selfTest(2) causes the
repeater to perform a agent-specific, non-
disruptive self-test that has the following
characteristics: (1) The nature of the tests is
not specified. (2) The test does not change the
state of the repeater or management information
about the repeater. (3) The test does not inject
packets onto any segment. (4) The test does not
prevent the relay of any packets. (5) The test
does not interfere with management functions.
After performing this test the agent will update
the repeater health information. If a change in
the repeater health has occurred, the agent will
send a rptrHealth trap.
Setting this variable to noSelfTest(1) has no
effect. The agent will always return the value
noSelfTest(1) when this variable is read.
Parsed from file msh100.mib.txt
Company: None
Module: LBMSH-MIB
Setting this variable to selfTest(2) causes the
repeater to perform a agent-specific, non-
disruptive self-test that has the following
characteristics: (1) The nature of the tests is
not specified. (2) The test does not change the
state of the repeater or management information
about the repeater. (3) The test does not inject
packets onto any segment. (4) The test does not
prevent the relay of any packets. (5) The test
does not interfere with management functions.
After performing this test the agent will update
the repeater health information. If a change in
the repeater health has occurred, the agent will
send a rptrHealth trap.
Setting this variable to noSelfTest(1) has no
effect. The agent will always return the value
noSelfTest(1) when this variable is read.
Parsed from file LBHUB-MSH-MIB.mib
Module: LBHUB-MSH-MIB
Automatically extracted from RFC2108
rptrNonDisruptTest OBJECT-TYPE SYNTAX INTEGER { noSelfTest(1), selfTest(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: (1) The nature of the tests is not specified. (2) The test does not change the state of the repeater or management information about the repeater. (3) The test does not inject packets onto any segment. (4) The test does not prevent the relay of any packets. (5) The test does not interfere with management functions. After performing this test the agent will update the repeater health information. If a change in the repeater health has occurred, the agent will send a rptrHealth trap. Setting this variable to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this variable is read." ::= {rptrRptrInfo 5}
rptrNonDisruptTest OBJECT-TYPE SYNTAX INTEGER { noSelfTest(1), selfTest(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to selfTest(2) causes the repeater to perform a agent-specific, non- disruptive self-test that has the following characteristics: (1) The nature of the tests is not specified. (2) The test does not change the state of the repeater or management information about the repeater. (3) The test does not inject packets onto any segment. (4) The test does not prevent the relay of any packets. (5) The test does not interfere with management functions. After performing this test the agent will update the repeater health information. If a change in the repeater health has occurred, the agent will send a rptrHealth trap. Setting this variable to noSelfTest(1) has no effect. The agent will always return the value noSelfTest(1) when this variable is read." ::= {rptrRptrInfo 5}
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.22.1.1.5.0 | rptrNonDisruptTest | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.22.1.1.1 | rptrGroupCapacity | 1 | 1 | The rptrGroupCapacity is the number of groups that can be contained within the repeater. Within each managed repeater, the groups… |
| 1.3.6.1.2.1.22.1.1.2 | rptrOperStatus | 1 | 1 | The rptrOperStatus object indicates the operational state of the repeater. The rptrHealthText object may be consulted for more spe… |
| 1.3.6.1.2.1.22.1.1.3 | rptrHealthText | 1 | 1 | The health text object is a text string that provides information relevant to the operational state of the repeater. Agents may u… |
| 1.3.6.1.2.1.22.1.1.4 | rptrReset | 1 | 1 | Setting this variable to reset(2) causes a transition to the START state of Fig 9-2 in section 9 [11]. Setting this variable to n… |
| 1.3.6.1.2.1.22.1.1.6 | rptrTotalPartitionedPorts | 1 | 1 | This object returns the total number of ports in the repeater whose current state meets all three of the following criteria: rpt… |