An estimate of the interface's current bandwidth in
units of 1,000,000 bits per second. If this object
reports a value of `n' then the speed of the interface
is somewhere in the range of `n-500,000' to
`n+499,999'. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. For a sub-layer which has no concept of
bandwidth, this object should be zero.
Parsed from file IF-MIB.mib
Module: IF-MIB
An estimate of the interface's current bandwidth in units
of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in
the range of `n-500,000' to `n+499,999'. For interfaces
which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain
the nominal bandwidth. For a sub-layer which has no concept
of bandwidth, this object should be zero.
ifHighSpeed OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An estimate of the interfaces current bandwidth in units
of 1,000,000 bits per second. If this object reports a
value of `n then the speed of the interface is somewhere in
the range of `n-500,000 to `n+499,999. For interfaces
which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain
the nominal bandwidth. For a sub-layer which has no concept
of bandwidth, this object should be zero."
View at oid-info.com
An estimate of the interface's current bandwidth in units
of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in
the range of `n-500,000' to `n+499,999'. For interfaces
which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain
the nominal bandwidth. For a sub-layer which has no concept
of bandwidth, this object should be zero.
Parsed from file rfc1573.mib.txt
Company: None
Module: IF-MIB
An estimate of the interface's current bandwidth in units
of 1,000,000 bits per second. If this object reports a
value of `n' then the speed of the interface is somewhere in
the range of `n-500,000' to `n+499,999'. For interfaces
which do not vary in bandwidth or for those where no
accurate estimation can be made, this object should contain
the nominal bandwidth. For a sub-layer which has no concept
of bandwidth, this object should be zero.
ifHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifXEntry 15 }
ifHighSpeed OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifXEntry 15 }
Automatically extracted from RFC2863
ifHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifXEntry 15 }
ifHighSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of `n' then the speed of the interface is somewhere in the range of `n-500,000' to `n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero." ::= { ifXEntry 15 }
IETF Interfaces MIB Working Group
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.31.1.1.1.1 | ifName | 0 | 0 | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device … |
| 1.3.6.1.2.1.31.1.1.1.2 | ifInMulticastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this s… |
| 1.3.6.1.2.1.31.1.1.1.3 | ifInBroadcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this s… |
| 1.3.6.1.2.1.31.1.1.1.4 | ifOutMulticastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address… |
| 1.3.6.1.2.1.31.1.1.1.5 | ifOutBroadcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address… |
| 1.3.6.1.2.1.31.1.1.1.6 | ifHCInOctets | 0 | 0 | The total number of octets received on the interface, including framing characters. This object is a 64-bit version of ifInOctet… |
| 1.3.6.1.2.1.31.1.1.1.7 | ifHCInUcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast … |
| 1.3.6.1.2.1.31.1.1.1.8 | ifHCInMulticastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this s… |
| 1.3.6.1.2.1.31.1.1.1.9 | ifHCInBroadcastPkts | 0 | 0 | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this s… |
| 1.3.6.1.2.1.31.1.1.1.10 | ifHCOutOctets | 0 | 0 | The total number of octets transmitted out of the interface, including framing characters. This object is a 64-bit version of if… |
| 1.3.6.1.2.1.31.1.1.1.11 | ifHCOutUcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or … |
| 1.3.6.1.2.1.31.1.1.1.12 | ifHCOutMulticastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address… |
| 1.3.6.1.2.1.31.1.1.1.13 | ifHCOutBroadcastPkts | 0 | 0 | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address… |
| 1.3.6.1.2.1.31.1.1.1.14 | ifLinkUpDownTrapEnable | 0 | 0 | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enab… |
| 1.3.6.1.2.1.31.1.1.1.16 | ifPromiscuousMode | 0 | 0 | This object has a value of false(2) if this interface only accepts packets/frames that are addressed to this station. This object… |
| 1.3.6.1.2.1.31.1.1.1.17 | ifConnectorPresent | 0 | 0 | This object has the value 'true(1)' if the interface sublayer has a physical connector and the value 'false(2)' otherwise. |
| 1.3.6.1.2.1.31.1.1.1.18 | ifAlias, ifDummyIndex | 1 | 1 | This object is an 'alias' name for the interface as specified by a network manager, and provides a non-volatile 'handle' for the … |
| 1.3.6.1.2.1.31.1.1.1.19 | ifCounterDiscontinuityTime | 0 | 0 | The value of sysUpTime on the most recent occasion at which any one or more of this interface's counters suffered a discontinuity… |