upsConfigOutputVoltage OBJECT-TYPE
SYNTAX NonNegativeInteger
UNITS "RMS Volts"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The magnitude of the nominal output voltage. On
those systems which support read-write access to this
object, if there is an attempt to set this variable to
a value that is not supported, the request must be
rejected and the agent shall respond with an
appropriate error message, i.e., badValue for SNMPv1,
or inconsistentValue for SNMPv2."
View at oid-info.com
The magnitude of the nominal output voltage. On
those systems which support read-write access to this
object, if there is an attempt to set this variable to
a value that is not supported, the request must be
rejected and the agent shall respond with an
appropriate error message, i.e., badValue for SNMPv1,
or inconsistentValue for SNMPv2.
Parsed from file UPS.mib.txt
Company: None
Module: UPS-MIB
The magnitude of the nominal output voltage. On
those systems which support read-write access to this
object, if there is an attempt to set this variable to
a value that is not supported, the request must be
rejected and the agent shall respond with an
appropriate error message, i.e., badValue for SNMPv1,
or inconsistentValue for SNMPv2.
Parsed from file UPS-MIB.mib
Module: UPS-MIB
Automatically extracted from RFC1628
upsConfigOutputVoltage OBJECT-TYPE SYNTAX NonNegativeInteger ACCESS read-write STATUS mandatory DESCRIPTION "The magnitude of the nominal output voltage. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2." ::= { upsConfig 3 }
upsConfigOutputVoltage OBJECT-TYPE SYNTAX NonNegativeInteger UNITS "RMS Volts" MAX-ACCESS read-write STATUS current DESCRIPTION "The magnitude of the nominal output voltage. On those systems which support read-write access to this object, if there is an attempt to set this variable to a value that is not supported, the request must be rejected and the agent shall respond with an appropriate error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2." ::= { upsConfig 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.33.1.9.3.0 | upsConfigOutputVoltage | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.33.1.9.1 | upsConfigInputVoltage | 1 | 1 | The magnitude of the nominal input voltage. On those systems which support read-write access to this object, if there is an atte… |
| 1.3.6.1.2.1.33.1.9.2 | upsConfigInputFreq | 1 | 1 | The nominal input frequency. On those systems which support read-write access to this object, if there is an attempt to set this… |
| 1.3.6.1.2.1.33.1.9.4 | upsConfigOutputFreq | 1 | 1 | The nominal output frequency. On those systems which support read-write access to this object, if there is an attempt to set thi… |
| 1.3.6.1.2.1.33.1.9.5 | upsConfigOutputVA | 1 | 1 | The magnitude of the nominal Volt-Amp rating. |
| 1.3.6.1.2.1.33.1.9.6 | upsConfigOutputPower | 1 | 1 | The magnitude of the nominal true power rating. |
| 1.3.6.1.2.1.33.1.9.7 | upsConfigLowBattTime | 1 | 1 | The value of upsEstimatedMinutesRemaining at which a lowBattery condition is declared. For agents which support only discrete (d… |
| 1.3.6.1.2.1.33.1.9.8 | upsConfigAudibleStatus | 1 | 1 | The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state i… |
| 1.3.6.1.2.1.33.1.9.9 | upsConfigLowVoltageTransferPoint | 1 | 1 | The minimum input line voltage allowed before the UPS system transfers to battery backup. |
| 1.3.6.1.2.1.33.1.9.10 | upsConfigHighVoltageTransferPoint | 1 | 1 | The maximum line voltage allowed before the UPS system transfers to battery backup. |