This table contains objects which describe the
configuration parameters for an SNA Node. Link
specific configuration objects are contained in
a separate MIB module (e.g., SNA DLC MIB)
corresponding to the link type.
The table snaNodeAdminLinkTable contains objects
which identify the relationship between node instances
and link instances.
The entries (i.e., rows) in this table can be created
by either an Agent or a Management Station.
The Management Station can do this through setting
the appropriate value in the snaNodeAdminRowStatus.
The snaNodeAdminRowStatus object describes the
status of an entry and is used to change the status
of an entry. The entry is deleted by an Agent based
on the value of the snaNodeAdminRowStatus.
The snaNodeAdminState object describes the desired
operational state of a Node and is used to change the
operational state of a Node. For example, such
information may be obtained from a configuration file.
How an Agent or a Management Station obtains the
initial value of each object at creation time is an
implementation specific issue.
For each entry in this table, there is a corresponding
entry in the snaNodeOperTable.
While the objects in this table describe the desired
or configured operational values of the SNA Node, the
actual runtime values are contained in
snaNodeOperTable.
Parsed from file SNA-NAU-MIB.mib
Module: SNA-NAU-MIB
This table contains objects which describe the
configuration parameters for an SNA Node. Link
specific configuration objects are contained in
a separate MIB module (e.g., SNA DLC MIB)
corresponding to the link type.
The table snaNodeAdminLinkTable contains objects
which identify the relationship between node instances
and link instances.
The entries (i.e., rows) in this table can be created
by either an Agent or a Management Station.
The Management Station can do this through setting
the appropriate value in the snaNodeAdminRowStatus.
The snaNodeAdminRowStatus object describes the
status of an entry and is used to change the status
of an entry. The entry is deleted by an Agent based
on the value of the snaNodeAdminRowStatus.
The snaNodeAdminState object describes the desired
operational state of a Node and is used to change the
operational state of a Node. For example, such
information may be obtained from a configuration file.
How an Agent or a Management Station obtains the
initial value of each object at creation time is an
implementation specific issue.
For each entry in this table, there is a corresponding
entry in the snaNodeOperTable.
While the objects in this table describe the desired
or configured operational values of the SNA Node, the
actual runtime values are contained in
snaNodeOperTable.
snaNodeAdminTable OBJECT-TYPE
SYNTAX SEQUENCE OF SnaNodeAdminEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains objects which describe the
configuration parameters for an SNA Node. Link
specific configuration objects are contained in
a separate MIB module (e.g., SNA DLC MIB)
corresponding to the link type.
The table snaNodeAdminLinkTable contains objects
which identify the relationship between node instances
and link instances.
The entries (i.e., rows) in this table can be created
by either an Agent or a Management Station.
The Management Station can do this through setting
the appropriate value in the snaNodeAdminRowStatus.
The snaNodeAdminRowStatus object describes the
status of an entry and is used to change the status
of an entry. The entry is deleted by an Agent based
on the value of the snaNodeAdminRowStatus.
The snaNodeAdminState object describes the desired
operational state of a Node and is used to change the
operational state of a Node. For example, such
information may be obtained from a configuration file.
How an Agent or a Management Station obtains the
initial value of each object at creation time is an
implementation specific issue.
For each entry in this table, there is a corresponding
entry in the snaNodeOperTable.
While the objects in this table describe the desired
or configured operational values of the SNA Node, the
actual runtime values are contained in
snaNodeOperTable."
View at oid-info.com
This table contains objects which describe the
configuration parameters for an SNA Node. Link
specific configuration objects are contained in
a separate MIB module (e.g., SNA DLC MIB)
corresponding to the link type.
The table snaNodeAdminLinkTable contains objects
which identify the relationship between node instances
and link instances.
The entries (i.e., rows) in this table can be created
by either an Agent or a Management Station.
The Management Station can do this through setting
the appropriate value in the snaNodeAdminRowStatus.
The snaNodeAdminRowStatus object describes the
status of an entry and is used to change the status
of an entry. The entry is deleted by an Agent based
on the value of the snaNodeAdminRowStatus.
The snaNodeAdminState object describes the desired
operational state of a Node and is used to change the
operational state of a Node. For example, such
information may be obtained from a configuration file.
How an Agent or a Management Station obtains the
initial value of each object at creation time is an
implementation specific issue.
For each entry in this table, there is a corresponding
entry in the snaNodeOperTable.
While the objects in this table describe the desired
or configured operational values of the SNA Node, the
actual runtime values are contained in
snaNodeOperTable.
Parsed from file rfc1666-SNA-NAU.mib.txt
Company: None
Module: SNA-NAU-MIB
This table contains objects which describe the
configuration parameters for an SNA Node. Link
specific configuration objects are contained in
a separate MIB module (e.g., SNA DLC MIB)
corresponding to the link type.
The table snaNodeAdminLinkTable contains objects
which identify the relationship between node instances
and link instances.
The entries (i.e., rows) in this table can be created
by either an Agent or a Management Station.
The Management Station can do this through setting
the appropriate value in the snaNodeAdminRowStatus.
The snaNodeAdminRowStatus object describes the
status of an entry and is used to change the status
of an entry. The entry is deleted by an Agent based
on the value of the snaNodeAdminRowStatus.
The snaNodeAdminState object describes the desired
operational state of a Node and is used to change the
operational state of a Node. For example, such
information may be obtained from a configuration file.
How an Agent or a Management Station obtains the
initial value of each object at creation time is an
implementation specific issue.
For each entry in this table, there is a corresponding
entry in the snaNodeOperTable.
While the objects in this table describe the desired
or configured operational values of the SNA Node, the
actual runtime values are contained in
snaNodeOperTable.
snaNodeAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF SnaNodeAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects which describe the configuration parameters for an SNA Node. Link specific configuration objects are contained in a separate MIB module (e.g., SNA DLC MIB) corresponding to the link type. The table snaNodeAdminLinkTable contains objects which identify the relationship between node instances and link instances. The entries (i.e., rows) in this table can be created by either an Agent or a Management Station. The Management Station can do this through setting the appropriate value in the snaNodeAdminRowStatus. The snaNodeAdminRowStatus object describes the status of an entry and is used to change the status of an entry. The entry is deleted by an Agent based on the value of the snaNodeAdminRowStatus. The snaNodeAdminState object describes the desired operational state of a Node and is used to change the operational state of a Node. For example, such information may be obtained from a configuration file. How an Agent or a Management Station obtains the initial value of each object at creation time is an implementation specific issue. For each entry in this table, there is a corresponding entry in the snaNodeOperTable. While the objects in this table describe the desired or configured operational values of the SNA Node, the actual runtime values are contained in snaNodeOperTable." ::= { snaNode 1 }
snaNodeAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF SnaNodeAdminEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains objects which describe the configuration parameters for an SNA Node. Link specific configuration objects are contained in a separate MIB module (e.g., SNA DLC MIB) corresponding to the link type. The table snaNodeAdminLinkTable contains objects which identify the relationship between node instances and link instances. The entries (i.e., rows) in this table can be created by either an Agent or a Management Station. The Management Station can do this through setting the appropriate value in the snaNodeAdminRowStatus. The snaNodeAdminRowStatus object describes the status of an entry and is used to change the status of an entry. The entry is deleted by an Agent based on the value of the snaNodeAdminRowStatus. The snaNodeAdminState object describes the desired operational state of a Node and is used to change the operational state of a Node. For example, such information may be obtained from a configuration file. How an Agent or a Management Station obtains the initial value of each object at creation time is an implementation specific issue. For each entry in this table, there is a corresponding entry in the snaNodeOperTable. While the objects in this table describe the desired or configured operational values of the SNA Node, the actual runtime values are contained in snaNodeOperTable." ::= { snaNode 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
snaNodeAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF SnaNodeAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects which describe the configuration parameters for an SNA Node. Link specific configuration objects are contained in a separate MIB module (e.g., SNA DLC MIB) corresponding to the link type. The table snaNodeAdminLinkTable contains objects which identify the relationship between node instances and link instances. The entries (i.e., rows) in this table can be created by either an Agent or a Management Station. The Management Station can do this through setting the appropriate value in the snaNodeAdminRowStatus. The snaNodeAdminRowStatus object describes the status of an entry and is used to change the status of an entry. The entry is deleted by an Agent based on the value of the snaNodeAdminRowStatus. The snaNodeAdminState object describes the desired operational state of a Node and is used to change the operational state of a Node. For example, such information may be obtained from a configuration file. How an Agent or a Management Station obtains the initial value of each object at creation time is an implementation specific issue. For each entry in this table, there is a corresponding entry in the snaNodeOperTable. While the objects in this table describe the desired or configured operational values of the SNA Node, the actual runtime values are contained in snaNodeOperTable." ::= { snaNode 1 }
snaNodeAdminTable OBJECT-TYPE SYNTAX SEQUENCE OF SnaNodeAdminEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects which describe the configuration parameters for an SNA Node. Link specific configuration objects are contained in a separate MIB module (e.g., SNA DLC MIB) corresponding to the link type. The table snaNodeAdminLinkTable contains objects which identify the relationship between node instances and link instances. The entries (i.e., rows) in this table can be created by either an Agent or a Management Station. The Management Station can do this through setting the appropriate value in the snaNodeAdminRowStatus. The snaNodeAdminRowStatus object describes the status of an entry and is used to change the status of an entry. The entry is deleted by an Agent based on the value of the snaNodeAdminRowStatus. The snaNodeAdminState object describes the desired operational state of a Node and is used to change the operational state of a Node. For example, such information may be obtained from a configuration file. How an Agent or a Management Station obtains the initial value of each object at creation time is an implementation specific issue. For each entry in this table, there is a corresponding entry in the snaNodeOperTable. While the objects in this table describe the desired or configured operational values of the SNA Node, the actual runtime values are contained in snaNodeOperTable." ::= { snaNode 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.34.1.1.1.1 | snaNodeAdminEntry | 13 | 13 | An entry contains the configuration parameters for one SNA Node instance. The objects in the entry have read-create access. An ent… |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.34.1.1.2 | snaNodeAdminTableLastChange | 1 | 1 | The value indicates the timestamp (e.g., the Agent's sysUpTime value) of the last change made to any object in the snaNodeAdminTa… |
| 1.3.6.1.2.1.34.1.1.3 | snaNodeOperTable | 1 | 17 | This table contains the dynamic parameters which have read-only access. These objects reflect the actual status of the Node. The … |
| 1.3.6.1.2.1.34.1.1.4 | snaNodeOperTableLastChange | 1 | 1 | The timestamp (e.g., the Agent's sysUpTime value) at the last change made to any object in the snaNodeOperTable, including row de… |
| 1.3.6.1.2.1.34.1.1.5 | snaPu20StatsTable | 1 | 10 | This table contains the dynamic parameters which have read-only access. The entries in this table correspond to PU 2.0 entries in… |
| 1.3.6.1.2.1.34.1.1.6 | snaNodeLinkAdminTable | 1 | 5 | This table contains the references to link specific tables. If a Node is configured for multiple links, then the Node will have mu… |
| 1.3.6.1.2.1.34.1.1.7 | snaNodeLinkAdminTableLastChange | 1 | 1 | The timestamp (e.g., the Agent's sysUpTime value) at the last change made to any object in the snaNodeLinkAdminTable, including ro… |
| 1.3.6.1.2.1.34.1.1.8 | snaNodeLinkOperTable | 1 | 3 | This table contains all references to link specific tables for operational parameters. If a Node is configured for multiple links… |
| 1.3.6.1.2.1.34.1.1.9 | snaNodeLinkOperTableLastChange | 1 | 1 | The timestamp of the last change made to any object in the snaNodeLinkOperTable, including row deletions/additions. This object ca… |
| 1.3.6.1.2.1.34.1.1.10 | snaNodeTraps | 2 | 2 | None |