Reference record for OID 1.3.6.1.2.1.34.1.2.1.1.8



parent
1.3.6.1.2.1.34.1.2.1.1 (snaLuAdminEntry)
node code
8
node name
snaLuAdminTerm
dot oid
1.3.6.1.2.1.34.1.2.1.1.8
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuAdminTable(1) snaLuAdminEntry(1) snaLuAdminTerm(8)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuAdminTable(1) snaLuAdminEntry(1) snaLuAdminTerm(8)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuAdminTable(1) snaLuAdminEntry(1) snaLuAdminTerm(8)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuAdminTable(1) snaLuAdminEntry(1) snaLuAdminTerm(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuAdminTable(1) snaLuAdminEntry(1) snaLuAdminTerm(8)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuAdminTable(1) snaLuAdminEntry(1) snaLuAdminTerm(8)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/snanauMIB/snanauObjects/snaLu/snaLuAdminTable/snaLuAdminEntry/snaLuAdminTerm
  • /iso/identified-organization/dod/internet/mgmt/mib/snanauMIB/snanauObjects/snaLu/snaLuAdminTable/snaLuAdminEntry/snaLuAdminTerm
  • /iso/org/dod/internet/mgmt/mib-2/snanauMIB/snanauObjects/snaLu/snaLuAdminTable/snaLuAdminEntry/snaLuAdminTerm
  • /iso/org/dod/internet/mgmt/mib/snanauMIB/snanauObjects/snaLu/snaLuAdminTable/snaLuAdminEntry/snaLuAdminTerm
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/snanauMIB/snanauObjects/snaLu/snaLuAdminTable/snaLuAdminEntry/snaLuAdminTerm
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/snanauMIB/snanauObjects/snaLu/snaLuAdminTable/snaLuAdminEntry/snaLuAdminTerm
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/34/1/2/1/1/8

    Description by circitor

    This value identifies the desired method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND
    to terminate the session.

    A write operation to this object may immediately
    change the operational value reflected
    in snaLuOperTerm depending
    on the Agent implementation.

    Parsed from file SNA-NAU-MIB.mib
    Module: SNA-NAU-MIB

    Description by cisco_v1

    This value identifies the desired method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND
    to terminate the session.

    A write operation to this object may immediately
    change the operational value reflected
    in snaLuOperTerm depending
    on the Agent implementation.

    Description by oid_info

    snaLuAdminTerm OBJECT-TYPE
    SYNTAX INTEGER {
    unbind (1),
    termself (2),
    rshutd (3),
    poweroff (4)
    }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "This value identifies the desired method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value unbind (1)
    applies.
    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND
    to terminate the session.
    A write operation to this object may immediately
    change the operational value reflected
    in snaLuOperTerm depending
    on the Agent implementation."
    View at oid-info.com

    Description by mibdepot

    This value identifies the desired method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND
    to terminate the session.

    A write operation to this object may immediately
    change the operational value reflected
    in snaLuOperTerm depending
    on the Agent implementation.

    Parsed from file rfc1666-SNA-NAU.mib.txt
    Company: None
    Module: SNA-NAU-MIB

    Description by cisco

    This value identifies the desired method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND
    to terminate the session.

    A write operation to this object may immediately
    change the operational value reflected
    in snaLuOperTerm depending
    on the Agent implementation.

    Information by circitor

    snaLuAdminTerm OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff (4)
                }
        MAX-ACCESS  read-create
        STATUS  current

        DESCRIPTION
                "This value identifies the desired method for
                deactivation of this LU. This value overrides the
                default method (snaNodeOperLuTermDefault) for this
                Node.  For LU 6.2, only the value 'unbind (1)'
                applies.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate
                        the session.
                poweroff(4) - terminate the LU-LU session by sending
                        either an SNA LUSTAT (LU Status) request on
                        the LU-LU session or an SNA NOTIFY request on
                        the SSCP-LU session indicating that the LU has
                        been powered off. Sending both is also
                        acceptable. The result should be that the
                        remote session LU partner will send an UNBIND
                        to terminate the session.

                A write operation to this object may immediately
                change the operational value reflected
                in snaLuOperTerm depending
                on the Agent implementation."
        ::= { snaLuAdminEntry 8 }

    Information by cisco_v1

    snaLuAdminTerm OBJECT-TYPE
    SYNTAX INTEGER {
        unbind(1),
        termself(2),
        rshutd(3),
        poweroff(4)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This value identifies the desired method for
        deactivation of this LU. This value overrides the
        default method (snaNodeOperLuTermDefault) for this
        Node.  For LU 6.2, only the value 'unbind (1)'
        applies.
        
        unbind(1) -   terminate the LU-LU session by sending
                an SNA UNBIND request.
        termself(2) - terminate the LU-LU session by sending
                an SNA TERM-SELF (Terminate Self) request on
                the SSCP-LU session. The SSCP will inform the
                remote session LU partner to send an UNBIND
                request to terminate the session.
        rshutd(3) -   terminate the LU-LU session by sending
                an SNA RSHUTD (Request ShutDown) request to
                the remote session LU partner. The remote LU
                will then send an UNBIND request to terminate
                the session.
        poweroff(4) - terminate the LU-LU session by sending
                either an SNA LUSTAT (LU Status) request on
                the LU-LU session or an SNA NOTIFY request on
                the SSCP-LU session indicating that the LU has
                been powered off. Sending both is also
                acceptable. The result should be that the
                remote session LU partner will send an UNBIND
                to terminate the session.
        
        A write operation to this object may immediately
        change the operational value reflected
        in snaLuOperTerm depending
        on the Agent implementation."
    ::= { snaLuAdminEntry 8 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    snaLuAdminTerm OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff (4)
                }
        MAX-ACCESS  read-create
        STATUS  current

        DESCRIPTION
                "This value identifies the desired method for
                deactivation of this LU. This value overrides the
                default method (snaNodeOperLuTermDefault) for this
                Node.  For LU 6.2, only the value 'unbind (1)'
                applies.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate
                        the session.
                poweroff(4) - terminate the LU-LU session by sending
                        either an SNA LUSTAT (LU Status) request on
                        the LU-LU session or an SNA NOTIFY request on
                        the SSCP-LU session indicating that the LU has
                        been powered off. Sending both is also
                        acceptable. The result should be that the
                        remote session LU partner will send an UNBIND
                        to terminate the session.

                A write operation to this object may immediately
                change the operational value reflected
                in snaLuOperTerm depending
                on the Agent implementation."
        ::= { snaLuAdminEntry 8 }

    Information by cisco

    snaLuAdminTerm OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff (4)
                }
        MAX-ACCESS  read-create
        STATUS  current





        DESCRIPTION
                "This value identifies the desired method for
                deactivation of this LU. This value overrides the
                default method (snaNodeOperLuTermDefault) for this
                Node.  For LU 6.2, only the value 'unbind (1)'
                applies.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate
                        the session.
                poweroff(4) - terminate the LU-LU session by sending
                        either an SNA LUSTAT (LU Status) request on
                        the LU-LU session or an SNA NOTIFY request on
                        the SSCP-LU session indicating that the LU has
                        been powered off. Sending both is also
                        acceptable. The result should be that the
                        remote session LU partner will send an UNBIND
                        to terminate the session.

                A write operation to this object may immediately
                change the operational value reflected
                in snaLuOperTerm depending
                on the Agent implementation."
        ::= { snaLuAdminEntry 8 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.34.1.2.1.1.1 snaLuAdminLuIndex 0 0 This value identifies the unique index for an

    LU instance within a Node.
    1.3.6.1.2.1.34.1.2.1.1.2 snaLuAdminName 0 0 This value identifies the user configurable
    name for this LU. If a name is not assigned to the LU,
    then this object contains a ze…
    1.3.6.1.2.1.34.1.2.1.1.3 snaLuAdminSnaName 0 0 This value identifies the SNA LU name
    used in exchange of SNA data.

    A write operation to this object will
    not change the operation…
    1.3.6.1.2.1.34.1.2.1.1.4 snaLuAdminType 0 0 This value identifies the LU type.

    A write operation to this object will
    not change the operational value reflected
    in snaLuOperAd…
    1.3.6.1.2.1.34.1.2.1.1.5 snaLuAdminDepType 0 0 This value identifies whether the LU is
    dependent or independent.

    A write operation to this object will
    not change the operational…
    1.3.6.1.2.1.34.1.2.1.1.6 snaLuAdminLocalAddress 0 0 The local address for this LU is a byte with a value
    ranging from 0 to 254.For dependent LUs, this value
    ranges from 1 to 254 and…
    1.3.6.1.2.1.34.1.2.1.1.7 snaLuAdminDisplayModel 0 0 The value of this object identifies the model type
    and screen size of the terminal connected to the host.
    This is only valid for…
    1.3.6.1.2.1.34.1.2.1.1.9 snaLuAdminRowStatus 0 0 This object is used by a Management Station to
    create or delete the row entry in the
    snaLuAdminTable.
    To activate a row, the Manag…