Reference record for OID 1.3.6.1.2.1.34.1.2.2.1.7



parent
1.3.6.1.2.1.34.1.2.2.1 (snaLuOperEntry)
node code
7
node name
snaLuOperTerm
dot oid
1.3.6.1.2.1.34.1.2.2.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuOperTable(2) snaLuOperEntry(1) snaLuOperTerm(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuOperTable(2) snaLuOperEntry(1) snaLuOperTerm(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuOperTable(2) snaLuOperEntry(1) snaLuOperTerm(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuOperTable(2) snaLuOperEntry(1) snaLuOperTerm(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuOperTable(2) snaLuOperEntry(1) snaLuOperTerm(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) snanauObjects(1) snaLu(2) snaLuOperTable(2) snaLuOperEntry(1) snaLuOperTerm(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/snanauMIB/snanauObjects/snaLu/snaLuOperTable/snaLuOperEntry/snaLuOperTerm
  • /iso/identified-organization/dod/internet/mgmt/mib/snanauMIB/snanauObjects/snaLu/snaLuOperTable/snaLuOperEntry/snaLuOperTerm
  • /iso/org/dod/internet/mgmt/mib-2/snanauMIB/snanauObjects/snaLu/snaLuOperTable/snaLuOperEntry/snaLuOperTerm
  • /iso/org/dod/internet/mgmt/mib/snanauMIB/snanauObjects/snaLu/snaLuOperTable/snaLuOperEntry/snaLuOperTerm
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/snanauMIB/snanauObjects/snaLu/snaLuOperTable/snaLuOperEntry/snaLuOperTerm
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/snanauMIB/snanauObjects/snaLu/snaLuOperTable/snaLuOperEntry/snaLuOperTerm
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/34/1/2/2/1/7

    Description by circitor

    The value identifies the current method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND

    to terminate the session.

    Parsed from file SNA-NAU-MIB.mib
    Module: SNA-NAU-MIB

    Description by cisco_v1

    The value identifies the current method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND





    to terminate the session.

    Description by oid_info

    snaLuOperTerm OBJECT-TYPE
    SYNTAX INTEGER {
    unbind (1),
    termself (2),
    rshutd (3),
    poweroff (4)
    }
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The value identifies the current method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value unbind (1)
    applies.
    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND
    to terminate the session."
    View at oid-info.com

    Description by mibdepot

    The value identifies the current method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND

    to terminate the session.

    Parsed from file rfc1666-SNA-NAU.mib.txt
    Company: None
    Module: SNA-NAU-MIB

    Description by cisco

    The value identifies the current method for
    deactivation of this LU. This value overrides the
    default method (snaNodeOperLuTermDefault) for this
    Node. For LU 6.2, only the value 'unbind (1)'
    applies.

    unbind(1) - terminate the LU-LU session by sending
    an SNA UNBIND request.
    termself(2) - terminate the LU-LU session by sending
    an SNA TERM-SELF (Terminate Self) request on
    the SSCP-LU session. The SSCP will inform the
    remote session LU partner to send an UNBIND
    request to terminate the session.
    rshutd(3) - terminate the LU-LU session by sending
    an SNA RSHUTD (Request ShutDown) request to
    the remote session LU partner. The remote LU
    will then send an UNBIND request to terminate
    the session.
    poweroff(4) - terminate the LU-LU session by sending
    either an SNA LUSTAT (LU Status) request on
    the LU-LU session or an SNA NOTIFY request on
    the SSCP-LU session indicating that the LU has
    been powered off. Sending both is also
    acceptable. The result should be that the
    remote session LU partner will send an UNBIND





    to terminate the session.

    Information by circitor

    snaLuOperTerm OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff (4)
                }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The value identifies the current method for
                deactivation of this LU. This value overrides the
                default method (snaNodeOperLuTermDefault) for this
                Node.  For LU 6.2, only the value 'unbind (1)'
                applies.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate
                        the session.
                poweroff(4) - terminate the LU-LU session by sending
                        either an SNA LUSTAT (LU Status) request on
                        the LU-LU session or an SNA NOTIFY request on
                        the SSCP-LU session indicating that the LU has
                        been powered off. Sending both is also
                        acceptable. The result should be that the
                        remote session LU partner will send an UNBIND

                        to terminate the session."
        ::= { snaLuOperEntry 7 }

    Information by cisco_v1

    snaLuOperTerm OBJECT-TYPE
    SYNTAX INTEGER {
        unbind(1),
        termself(2),
        rshutd(3),
        poweroff(4)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The value identifies the current method for
        deactivation of this LU. This value overrides the
        default method (snaNodeOperLuTermDefault) for this
        Node.  For LU 6.2, only the value 'unbind (1)'
        applies.
        
        unbind(1) -   terminate the LU-LU session by sending
                an SNA UNBIND request.
        termself(2) - terminate the LU-LU session by sending
                an SNA TERM-SELF (Terminate Self) request on
                the SSCP-LU session. The SSCP will inform the
                remote session LU partner to send an UNBIND
                request to terminate the session.
        rshutd(3) -   terminate the LU-LU session by sending
                an SNA RSHUTD (Request ShutDown) request to
                the remote session LU partner. The remote LU
                will then send an UNBIND request to terminate
                the session.
        poweroff(4) - terminate the LU-LU session by sending
                either an SNA LUSTAT (LU Status) request on
                the LU-LU session or an SNA NOTIFY request on
                the SSCP-LU session indicating that the LU has
                been powered off. Sending both is also
                acceptable. The result should be that the
                remote session LU partner will send an UNBIND
        
        
        
        
        
                to terminate the session."
    ::= { snaLuOperEntry 7 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    snaLuOperTerm OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff (4)
                }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The value identifies the current method for
                deactivation of this LU. This value overrides the
                default method (snaNodeOperLuTermDefault) for this
                Node.  For LU 6.2, only the value 'unbind (1)'
                applies.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate
                        the session.
                poweroff(4) - terminate the LU-LU session by sending
                        either an SNA LUSTAT (LU Status) request on
                        the LU-LU session or an SNA NOTIFY request on
                        the SSCP-LU session indicating that the LU has
                        been powered off. Sending both is also
                        acceptable. The result should be that the
                        remote session LU partner will send an UNBIND

                        to terminate the session."
        ::= { snaLuOperEntry 7 }

    Information by cisco

    snaLuOperTerm OBJECT-TYPE
        SYNTAX  INTEGER {
                unbind (1),
                termself (2),
                rshutd (3),
                poweroff (4)
                }
        MAX-ACCESS  read-only
        STATUS  current
        DESCRIPTION
                "The value identifies the current method for
                deactivation of this LU. This value overrides the
                default method (snaNodeOperLuTermDefault) for this
                Node.  For LU 6.2, only the value 'unbind (1)'
                applies.

                unbind(1) -   terminate the LU-LU session by sending
                        an SNA UNBIND request.
                termself(2) - terminate the LU-LU session by sending
                        an SNA TERM-SELF (Terminate Self) request on
                        the SSCP-LU session. The SSCP will inform the
                        remote session LU partner to send an UNBIND
                        request to terminate the session.
                rshutd(3) -   terminate the LU-LU session by sending
                        an SNA RSHUTD (Request ShutDown) request to
                        the remote session LU partner. The remote LU
                        will then send an UNBIND request to terminate
                        the session.
                poweroff(4) - terminate the LU-LU session by sending
                        either an SNA LUSTAT (LU Status) request on
                        the LU-LU session or an SNA NOTIFY request on
                        the SSCP-LU session indicating that the LU has
                        been powered off. Sending both is also
                        acceptable. The result should be that the
                        remote session LU partner will send an UNBIND





                        to terminate the session."
        ::= { snaLuOperEntry 7 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.34.1.2.2.1.1 snaLuOperName 0 0 User configurable name for this LU. If a name
    is not assigned, then this object contains a
    zero length string.
    1.3.6.1.2.1.34.1.2.2.1.2 snaLuOperSnaName 0 0 The value identifies the current SNA LU name.
    1.3.6.1.2.1.34.1.2.2.1.3 snaLuOperType 0 0 The value identifies the current LU type.
    1.3.6.1.2.1.34.1.2.2.1.4 snaLuOperDepType 0 0 The value identifies whether the LU is currently
    dependent or independent.

    A write operation to this object will
    not change the op…
    1.3.6.1.2.1.34.1.2.2.1.5 snaLuOperLocalAddress 0 0 The local address for this LU is a byte with a value
    ranging from 0 to 254. For dependent LUs, this value
    ranges from 1 to 254; f…
    1.3.6.1.2.1.34.1.2.2.1.6 snaLuOperDisplayModel 0 0 The screen model type of the terminal connected to
    the host. If this LU is not Type 2, then this
    object should contain the 'inval…
    1.3.6.1.2.1.34.1.2.2.1.8 snaLuOperState 0 0 The value identifies the current operational state of
    this LU.
    It has different meanings for dependent and independent
    LUs.
    For dep…
    1.3.6.1.2.1.34.1.2.2.1.9 snaLuOperSessnCount 0 0 The number of currently active LU-LU sessions of
    this LU.
    For the independent LU, if this object has value 0,
    it indicates that LU…