appcModeOperInBoundCompLevel OBJECT-TYPE
SYNTAX INTEGER {
none(1),
rle(2),
lz9(3),
lz10(4),
lz12(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the maximum level of compression supported for
inbound data. The local LU uses this value in conjunction with
appcModeOperCompression for negotiation during session
activation (SNA BIND).
none - specifies that no compression is to be used.
rle - specifies run-length encoding compression
in which a 1 or 2 byte sequence substitution is
used for each repeated run of the same character.
lz9 - specifies Lempel-Ziv-like compression in which
9 bit codes are used to substitute repeated
substrings in the data stream. These codes are
indices that refer to entries in a common
dictionary generated adaptively at both sender and
receiver as the data flows and compression occurs.
The larger of number bits used for the code, the
more storage space is required for the dictionary,
but the larger the compression ratio.
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
lz12 - specifies a 12 bit code Lempel-Ziv-like compression."
View at oid-info.com
Specifies the maximum level of compression supported for
inbound data. The local LU uses this value in conjunction with
appcModeOperCompression for negotiation during session
activation (SNA BIND).
none - specifies that no compression is to be used.
rle - specifies run-length encoding compression
in which a 1 or 2 byte sequence substitution is
used for each repeated run of the same character.
lz9 - specifies Lempel-Ziv-like compression in which
9 bit codes are used to substitute repeated
substrings in the data stream. These codes are
indices that refer to entries in a common
dictionary generated adaptively at both sender and
receiver as the data flows and compression occurs.
The larger of number bits used for the code, the
more storage space is required for the dictionary,
but the larger the compression ratio.
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
lz12 - specifies a 12 bit code Lempel-Ziv-like compression.
Parsed from file rfc2051-APPC.mib.txt
Company: None
Module: APPC-MIB
Specifies the maximum level of compression supported for
inbound data. The local LU uses this value in conjunction with
appcModeOperCompression for negotiation during session
activation (SNA BIND).
none - specifies that no compression is to be used.
rle - specifies run-length encoding compression
in which a 1 or 2 byte sequence substitution is
used for each repeated run of the same character.
lz9 - specifies Lempel-Ziv-like compression in which
9 bit codes are used to substitute repeated
substrings in the data stream. These codes are
indices that refer to entries in a common
dictionary generated adaptively at both sender and
receiver as the data flows and compression occurs.
The larger of number bits used for the code, the
more storage space is required for the dictionary,
but the larger the compression ratio.
lz10 - specifies a 10 bit code Lempel-Ziv-like compression.
lz12 - specifies a 12 bit code Lempel-Ziv-like compression.
Parsed from file APPC-MIB.mib
Module: APPC-MIB
Automatically extracted from RFC2051
appcModeOperInBoundCompLevel OBJECT-TYPE SYNTAX INTEGER { none(1), rle(2), lz9(3), lz10(4), lz12(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcModeOperCompression for negotiation during session activation (SNA BIND). none - specifies that no compression is to be used. rle - specifies run-length encoding compression in which a 1 or 2 byte sequence substitution is used for each repeated run of the same character. lz9 - specifies Lempel-Ziv-like compression in which 9 bit codes are used to substitute repeated substrings in the data stream. These codes are indices that refer to entries in a common dictionary generated adaptively at both sender and receiver as the data flows and compression occurs. The larger of number bits used for the code, the more storage space is required for the dictionary, but the larger the compression ratio. lz10 - specifies a 10 bit code Lempel-Ziv-like compression. lz12 - specifies a 12 bit code Lempel-Ziv-like compression." ::= { appcModeOperEntry 21 }
appcModeOperInBoundCompLevel OBJECT-TYPE SYNTAX INTEGER { none(1), rle(2), lz9(3), lz10(4), lz12(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum level of compression supported for inbound data. The local LU uses this value in conjunction with appcModeOperCompression for negotiation during session activation (SNA BIND). none - specifies that no compression is to be used. rle - specifies run-length encoding compression in which a 1 or 2 byte sequence substitution is used for each repeated run of the same character. lz9 - specifies Lempel-Ziv-like compression in which 9 bit codes are used to substitute repeated substrings in the data stream. These codes are indices that refer to entries in a common dictionary generated adaptively at both sender and receiver as the data flows and compression occurs. The larger of number bits used for the code, the more storage space is required for the dictionary, but the larger the compression ratio. lz10 - specifies a 10 bit code Lempel-Ziv-like compression. lz12 - specifies a 12 bit code Lempel-Ziv-like compression." ::= { appcModeOperEntry 21 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.34.3.1.2.6.1.1 | appcModeOperLocLuName | 0 | 0 | The SNA name of the local LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetId … |
| 1.3.6.1.2.1.34.3.1.2.6.1.2 | appcModeOperParLuName | 0 | 0 | The SNA name of the partner LU. This field is from 1 to 17 characters in length, including a period (.) which separates the NetI… |
| 1.3.6.1.2.1.34.3.1.2.6.1.3 | appcModeOperModeName | 0 | 0 | Specifies the mode name. A mode defines the characteristics for a group of sessions. The mode name can be blank (8 space characte… |
| 1.3.6.1.2.1.34.3.1.2.6.1.4 | appcModeOperCosName | 0 | 0 | Specifies the class of service (COS) name associated with this mode. If the implementation does not support COS names, a zero-le… |
| 1.3.6.1.2.1.34.3.1.2.6.1.5 | appcModeOperSessEndTpName | 0 | 0 | Specifies the name of the transaction program (TP) to be invoked when a session using this mode is deactivated or ended. If the n… |
| 1.3.6.1.2.1.34.3.1.2.6.1.6 | appcModeOperSessLimit | 0 | 0 | Specifies the current session limit of this mode as negotiated through APPC CNOS (Change Number of Sessions) processing. Identifi… |
| 1.3.6.1.2.1.34.3.1.2.6.1.7 | appcModeOperMaxSessLimit | 0 | 0 | Specifies the maximum value that the local LU is to use, during CNOS processing, for the session limit. The local LU, as a targe… |
| 1.3.6.1.2.1.34.3.1.2.6.1.8 | appcModeOperMinCwinLimit | 0 | 0 | Specifies the minimum contention winner sessions limit that was negotiated via CNOS processing. |
| 1.3.6.1.2.1.34.3.1.2.6.1.9 | appcModeOperMinClosLimit | 0 | 0 | Specifies the minimum contention loser sessions limit that was negotiated via CNOS processing. This is the same as target minimum… |
| 1.3.6.1.2.1.34.3.1.2.6.1.10 | appcModeOperConWinAutoActLmt | 0 | 0 | Specifies the limit on the number of contention winner sessions to be automatically activated when the minimum number of contenti… |
| 1.3.6.1.2.1.34.3.1.2.6.1.11 | appcModeOperRecvPacWinSz | 0 | 0 | Specifies the size of the receive pacing window. This value is used for negotiation during session activations (SNA BIND). The me… |
| 1.3.6.1.2.1.34.3.1.2.6.1.12 | appcModeOperSendPacWinSz | 0 | 0 | Specifies the size of the send pacing window. This value is used for negotiation during session activations (SNA BIND). The meani… |
| 1.3.6.1.2.1.34.3.1.2.6.1.13 | appcModeOperPrefRecvRuSz | 0 | 0 | Specifies the preferred receive RU (Request Unit) size of normal-flow requests on the sessions. This value must be less than or … |
| 1.3.6.1.2.1.34.3.1.2.6.1.14 | appcModeOperPrefSendRuSz | 0 | 0 | Specifies the preferred send RU (Request Unit) size of normal- flow requests on the sessions. This value must be less than or eq… |
| 1.3.6.1.2.1.34.3.1.2.6.1.15 | appcModeOperRecvRuSzUpBnd | 0 | 0 | Specifies the upper bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation du… |
| 1.3.6.1.2.1.34.3.1.2.6.1.16 | appcModeOperSendRuSzUpBnd | 0 | 0 | Specifies the upper bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation duri… |
| 1.3.6.1.2.1.34.3.1.2.6.1.17 | appcModeOperRecvRuSzLoBnd | 0 | 0 | Specifies the lower bound for the maximum receive RU (Request Unit) size of normal-flow requests. This is used for negotiation du… |
| 1.3.6.1.2.1.34.3.1.2.6.1.18 | appcModeOperSendRuSzLoBnd | 0 | 0 | Specifies the lower bound for the maximum send RU (Request Unit) size of normal-flow requests. This is used for negotiation durin… |
| 1.3.6.1.2.1.34.3.1.2.6.1.19 | appcModeOperSingSessReinit | 0 | 0 | Specifies the responsibility for session reinitiation of a single session with the partner LU (when the session goes down). The … |
| 1.3.6.1.2.1.34.3.1.2.6.1.20 | appcModeOperCompression | 0 | 0 | Specifies whether compression is supported. The local LU uses this value for negotiation during session activation (SNA BIND). pr… |
| 1.3.6.1.2.1.34.3.1.2.6.1.22 | appcModeOperOutBoundCompLevel | 0 | 0 | Specifies the maximum level of compression supported for outbound data. The local LU uses this value in conjunction with appcMod… |
| 1.3.6.1.2.1.34.3.1.2.6.1.23 | appcModeOperCompRleBeforeLZ | 0 | 0 | Specifies whether run-length encoding is to be applied to the data before applying Lempel-Ziv-like compression. The local LU use… |
| 1.3.6.1.2.1.34.3.1.2.6.1.24 | appcModeOperSyncLvl | 0 | 0 | Specifies the sync level support for sessions involving this LU pair and mode name. none - No sync level is sup… |
| 1.3.6.1.2.1.34.3.1.2.6.1.25 | appcModeOperCrypto | 0 | 0 | Specifies whether session-level cryptography is supported for sessions involving this LU pair and mode name. notSupported - … |
| 1.3.6.1.2.1.34.3.1.2.6.1.26 | appcModeOperSyncLvlLastStart | 0 | 0 | Specifies the sync level support. This value represents the initial value proposed by the local LU the last time this capability… |
| 1.3.6.1.2.1.34.3.1.2.6.1.27 | appcModeOperCryptoLastStart | 0 | 0 | Specifies whether session-level cryptography is supported. This value represents the initial value proposed by the local LU the l… |
| 1.3.6.1.2.1.34.3.1.2.6.1.28 | appcModeOperCNOSNeg | 0 | 0 | Specifies whether CNOS negotiation is in process. CNOS negotiation is used to set or change the various session limits for a mod… |
| 1.3.6.1.2.1.34.3.1.2.6.1.29 | appcModeOperActCwin | 0 | 0 | Specifies the number of active contention winner sessions. |
| 1.3.6.1.2.1.34.3.1.2.6.1.30 | appcModeOperActClos | 0 | 0 | Specifies the number of active contention loser sessions. |
| 1.3.6.1.2.1.34.3.1.2.6.1.31 | appcModeOperPndCwin | 0 | 0 | Specifies the number of contention winner sessions that are pending activation. |
| 1.3.6.1.2.1.34.3.1.2.6.1.32 | appcModeOperPndClos | 0 | 0 | Specifies the number of contention loser sessions that are pending activation. |
| 1.3.6.1.2.1.34.3.1.2.6.1.33 | appcModeOperPtmCwin | 0 | 0 | Specifies the number of contention winner sessions that are pending termination. |
| 1.3.6.1.2.1.34.3.1.2.6.1.34 | appcModeOperPtmClos | 0 | 0 | Specifies the number of contention loser sessions that are pending termination. |
| 1.3.6.1.2.1.34.3.1.2.6.1.35 | appcModeOperDrainSelf | 0 | 0 | Specifies whether the local LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RESET… |
| 1.3.6.1.2.1.34.3.1.2.6.1.36 | appcModeOperDrainPart | 0 | 0 | Specifies whether the partner LU is draining its conversations for this mode. When a mode session limit is reset (via a CNOS RES… |