Reference record for OID 1.3.6.1.2.1.34.4.0.5

parent

1.3.6.1.2.1.34.4.0 (appnTrapMIB)

node code

5

node name

appnLsOperStateChangeTrap

dot oid

1.3.6.1.2.1.34.4.0.5

type

NOTIFICATION-TYPE

asn1 oid

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) appnMIB(4) appnTrapMIB(0) appnLsOperStateChangeTrap(5)}

{iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) appnMIB(4) appnTrapMIB(0) appnLsOperStateChangeTrap(5)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) appnMIB(4) appnTrapMIB(0) appnLsOperStateChangeTrap(5)}

{iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) appnMIB(4) appnTrapMIB(0) appnLsOperStateChangeTrap(5)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) snanauMIB(34) appnMIB(4) appnTrapMIB(0) appnLsOperStateChangeTrap(5)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) snanauMIB(34) appnMIB(4) appnTrapMIB(0) appnLsOperStateChangeTrap(5)}

iri oid

/iso/identified-organization/dod/internet/mgmt/mib-2/snanauMIB/appnMIB/appnTrapMIB/appnLsOperStateChangeTrap

/iso/identified-organization/dod/internet/mgmt/mib/snanauMIB/appnMIB/appnTrapMIB/appnLsOperStateChangeTrap

/iso/org/dod/internet/mgmt/mib-2/snanauMIB/appnMIB/appnTrapMIB/appnLsOperStateChangeTrap

/iso/org/dod/internet/mgmt/mib/snanauMIB/appnMIB/appnTrapMIB/appnLsOperStateChangeTrap

/iso/iso-identified-organization/dod/internet/mgmt/mib-2/snanauMIB/appnMIB/appnTrapMIB/appnLsOperStateChangeTrap

/iso/iso-identified-organization/dod/internet/mgmt/mib/snanauMIB/appnMIB/appnTrapMIB/appnLsOperStateChangeTrap

iri by oid_info

/ISO/Identified-Organization/6/1/2/1/34/4/0/5

Description by circitor

When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of link station operational state changes, and
thus to reduce the frequency with which it polls for these
changes. This notification is only sent when a appnLsOperState
has transitioned to a value of 'active' or 'inactive'.

This notification is sent whenever there is a appnLsOperState
object transition to 'inactive' or 'active' state in the
appnLsTable. This notification is only sent for row creation
if the row is created with a value of 'active' for
appnLsOperState. This notification is only sent for
row deletion if the last value of appnLsOperState was
'active'. In this case, the value of appnLsOperState
in the notification shall be 'inactive', since the deletion of
a row indicates that the link station is no longer active.

The notification is more than a simple 'poll me now' indication.
It carries both a count of link station table changes, and the
operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLsTable again.

Generation of this notification is controlled by the
appnTrapControl object.

Parsed from file APPN-TRAP-MIB.mib
Module: APPN-TRAP-MIB

Description by oid_info

appnLsOperStateChangeTrap NOTIFICATION-TYPE
OBJECTS {
appnLsTableChanges,
appnLsOperState
}
STATUS current
DESCRIPTION
"When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of link station operational state changes, and
thus to reduce the frequency with which it polls for these
changes. This notification is only sent when a appnLsOperState
has transitioned to a value of active or inactive.
This notification is sent whenever there is a appnLsOperState
object transition to inactive or active state in the
appnLsTable. This notification is only sent for row creation
if the row is created with a value of active for
appnLsOperState. This notification is only sent for
row deletion if the last value of appnLsOperState was
active. In this case, the value of appnLsOperState
in the notification shall be inactive, since the deletion of
a row indicates that the link station is no longer active.
The notification is more than a simple poll me now indication.
It carries both a count of link station table changes, and the
operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLsTable again.
Generation of this notification is controlled by the
appnTrapControl object."
View at oid-info.com

Description by mibdepot

When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of link station operational state changes, and
thus to reduce the frequency with which it polls for these
changes. This notification is only sent when a appnLsOperState
has transitioned to a value of 'active' or 'inactive'.

This notification is sent whenever there is a appnLsOperState
object transition to 'inactive' or 'active' state in the
appnLsTable. This notification is only sent for row creation
if the row is created with a value of 'active' for
appnLsOperState. This notification is only sent for
row deletion if the last value of appnLsOperState was
'active'. In this case, the value of appnLsOperState
in the notification shall be 'inactive', since the deletion of
a row indicates that the link station is no longer active.

The notification is more than a simple 'poll me now' indication.
It carries both a count of link station table changes, and the
operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLsTable again.

Generation of this notification is controlled by the
appnTrapControl object.

Parsed from file rfc2456-APPN-TRAPS.mib.txt
Company: None
Module: APPN-TRAP-MIB

Description by cisco

When it has been enabled, this notification makes it possible
for an APPN topology application to get asynchronous
notifications of link station operational state changes, and
thus to reduce the frequency with which it polls for these
changes. This notification is only sent when a appnLsOperState
has transitioned to a value of 'active' or 'inactive'.

This notification is sent whenever there is a appnLsOperState


object transition to 'inactive' or 'active' state in the
appnLsTable. This notification is only sent for row creation
if the row is created with a value of 'active' for
appnLsOperState. This notification is only sent for
row deletion if the last value of appnLsOperState was
'active'. In this case, the value of appnLsOperState
in the notification shall be 'inactive', since the deletion of
a row indicates that the link station is no longer active.

The notification is more than a simple 'poll me now' indication.
It carries both a count of link station table changes, and the
operational state itself. The count of changes allows an
application to detect lost notifications, either when polling
or upon receiving a subsequent notification, at which point it
knows it must retrieve the entire appnLsTable again.

Generation of this notification is controlled by the
appnTrapControl object.

Information by circitor

appnLsOperStateChangeTrap NOTIFICATION-TYPE
      OBJECTS  {
                appnLsTableChanges,
                appnLsOperState
               }
      STATUS current
      DESCRIPTION
          "When it has been enabled, this notification makes it possible
          for an APPN topology application to get asynchronous
          notifications of link station operational state changes, and
          thus to reduce the frequency with which it polls for these
          changes.  This notification is only sent when a appnLsOperState
          has transitioned to a value of 'active' or 'inactive'.

          This notification is sent whenever there is a appnLsOperState
          object transition to 'inactive' or 'active' state in the
          appnLsTable.  This notification is only sent for row creation
          if the row is created with a value of 'active' for
          appnLsOperState.  This notification is only sent for
          row deletion if the last value of appnLsOperState was
          'active'.  In this case, the value of appnLsOperState
          in the notification shall be 'inactive', since the deletion of
          a row indicates that the link station is no longer active.

          The notification is more than a simple 'poll me now' indication.
          It carries both a count of link station table changes, and the
          operational state itself.  The count of changes allows an
          application to detect lost notifications, either when polling
          or upon receiving a subsequent notification, at which point it
          knows it must retrieve the entire appnLsTable again.

          Generation of this notification is controlled by the
          appnTrapControl object."
      ::= { appnTrapMIB 5 }

Information by oid_info

Automatically extracted from Cisco "SNMP v2 MIBs".

Information by mibdepot

appnLsOperStateChangeTrap NOTIFICATION-TYPE
      OBJECTS  {
                appnLsTableChanges,
                appnLsOperState
               }
      STATUS current
      DESCRIPTION
          "When it has been enabled, this notification makes it possible
          for an APPN topology application to get asynchronous
          notifications of link station operational state changes, and
          thus to reduce the frequency with which it polls for these
          changes.  This notification is only sent when a appnLsOperState
          has transitioned to a value of 'active' or 'inactive'.

          This notification is sent whenever there is a appnLsOperState
          object transition to 'inactive' or 'active' state in the
          appnLsTable.  This notification is only sent for row creation
          if the row is created with a value of 'active' for
          appnLsOperState.  This notification is only sent for
          row deletion if the last value of appnLsOperState was
          'active'.  In this case, the value of appnLsOperState
          in the notification shall be 'inactive', since the deletion of
          a row indicates that the link station is no longer active.

          The notification is more than a simple 'poll me now' indication.
          It carries both a count of link station table changes, and the
          operational state itself.  The count of changes allows an
          application to detect lost notifications, either when polling
          or upon receiving a subsequent notification, at which point it
          knows it must retrieve the entire appnLsTable again.

          Generation of this notification is controlled by the
          appnTrapControl object."
      ::= { appnTrapMIB 5 }

Information by cisco

appnLsOperStateChangeTrap NOTIFICATION-TYPE
      OBJECTS  {
                appnLsTableChanges,
                appnLsOperState
               }
      STATUS current
      DESCRIPTION
          "When it has been enabled, this notification makes it possible
          for an APPN topology application to get asynchronous
          notifications of link station operational state changes, and
          thus to reduce the frequency with which it polls for these
          changes.  This notification is only sent when a appnLsOperState
          has transitioned to a value of 'active' or 'inactive'.

          This notification is sent whenever there is a appnLsOperState


          object transition to 'inactive' or 'active' state in the
          appnLsTable.  This notification is only sent for row creation
          if the row is created with a value of 'active' for
          appnLsOperState.  This notification is only sent for
          row deletion if the last value of appnLsOperState was
          'active'.  In this case, the value of appnLsOperState
          in the notification shall be 'inactive', since the deletion of
          a row indicates that the link station is no longer active.

          The notification is more than a simple 'poll me now' indication.
          It carries both a count of link station table changes, and the
          operational state itself.  The count of changes allows an
          application to detect lost notifications, either when polling
          or upon receiving a subsequent notification, at which point it
          knows it must retrieve the entire appnLsTable again.

          Generation of this notification is controlled by the
          appnTrapControl object."

      ::= { appnTrapMIB 5 }

First Registration Authority (recovered by parent 1.3.6)

Defense Communication Agency

Current Registration Authority (recovered by parent 1.3.6.1.2)

Internet Assigned Numbers Authority

Brothers (5)