dlurPuStatus OBJECT-TYPE
SYNTAX INTEGER {
reset(1),
pendReqActpuRsp(2),
pendActpu(3),
pendActpuRsp(4),
active(5),
pendLinkact(6),
pendDactpuRsp(7),
pendInop(8),
pendInopActpu(9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Status of the DLUR-supported PU. The following values are
defined:
reset(1) - reset
pendReqActpuRsp(2) - pending a response from the DLUS
to a Request ACTPU
pendActpu(3) - pending an ACTPU from the DLUS
pendActpuRsp(4) - pending an ACTPU response from the PU
active(5) - active
pendLinkact(6) - pending activation of the link to a
downstream PU
pendDactpuRsp(7) - pending a DACTPU response from the PU
pendInop(8) - the CPSVRMGR pipe became inoperative
while the DLUR was pending an ACTPU
response from the PU
pendInopActpu(9) - when the DLUR was in the pendInop
state, a CPSVRMGR pipe became active
and a new ACTPU was received over it,
before a response to the previous
ACTPU was received from the PU."
View at oid-info.com
Status of the DLUR-supported PU. The following values are
defined:
reset(1) - reset
pendReqActpuRsp(2) - pending a response from the DLUS
to a Request ACTPU
pendActpu(3) - pending an ACTPU from the DLUS
pendActpuRsp(4) - pending an ACTPU response from the PU
active(5) - active
pendLinkact(6) - pending activation of the link to a
downstream PU
pendDactpuRsp(7) - pending a DACTPU response from the PU
pendInop(8) - the CPSVRMGR pipe became inoperative
while the DLUR was pending an ACTPU
response from the PU
pendInopActpu(9) - when the DLUR was in the pendInop
state, a CPSVRMGR pipe became active
and a new ACTPU was received over it,
before a response to the previous
ACTPU was received from the PU.
Parsed from file APPN-DLUR-MIB.mib
Module: APPN-DLUR-MIB
Automatically extracted from Cisco SNMP v1 MIBs
dlurPuStatus OBJECT-TYPE SYNTAX INTEGER { reset(1), pendReqActpuRsp(2), pendActpu(3), pendActpuRsp(4), active(5), pendLinkact(6), pendDactpuRsp(7), pendInop(8), pendInopActpu(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the DLUR-supported PU. The following values are defined: reset(1) - reset pendReqActpuRsp(2) - pending a response from the DLUS to a Request ACTPU pendActpu(3) - pending an ACTPU from the DLUS pendActpuRsp(4) - pending an ACTPU response from the PU active(5) - active pendLinkact(6) - pending activation of the link to a downstream PU pendDactpuRsp(7) - pending a DACTPU response from the PU pendInop(8) - the CPSVRMGR pipe became inoperative while the DLUR was pending an ACTPU response from the PU pendInopActpu(9) - when the DLUR was in the pendInop state, a CPSVRMGR pipe became active and a new ACTPU was received over it, before a response to the previous ACTPU was received from the PU." ::= { dlurPuEntry 3 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.34.5.1.2.1.1.1 | dlurPuName | 0 | 0 | Locally administered name of the PU. |
| 1.3.6.1.2.1.34.5.1.2.1.1.2 | dlurPuSscpSuppliedName | 0 | 0 | The SNA name of the PU. This value is supplied to a PU by the SSCP that activated it. If a value has not been supplied, a zero-… |
| 1.3.6.1.2.1.34.5.1.2.1.1.4 | dlurPuAnsSupport | 0 | 0 | The Automatic Network Shutdown (ANS) support configured for this PU. This value (as configured by the network administrator) is … |
| 1.3.6.1.2.1.34.5.1.2.1.1.5 | dlurPuLocation | 0 | 0 | Location of the DLUR-support PU: internal(1) - internal to the APPN node itself (no link) downstream(2) - downstream of the APP… |
| 1.3.6.1.2.1.34.5.1.2.1.1.6 | dlurPuLsName | 0 | 0 | Administratively assigned name of the link station through which a downstream PU is connected to this DLUR. A zero-length string… |
| 1.3.6.1.2.1.34.5.1.2.1.1.7 | dlurPuDlusSessnStatus | 0 | 0 | Status of the control session to the DLUS identified in dlurPuActiveDlusName. This is a combination of the separate states for t… |
| 1.3.6.1.2.1.34.5.1.2.1.1.8 | dlurPuActiveDlusName | 0 | 0 | The SNA name of the active DLUS for this PU. If its length is not zero, this name follows the SnaControlPointName textual conven… |
| 1.3.6.1.2.1.34.5.1.2.1.1.9 | dlurPuDefPrimDlusName | 0 | 0 | The SNA name of the defined primary DLUS for this PU, if one has been defined. If present, this name follows the SnaControlPoint… |