Reference record for OID 1.3.6.1.2.1.37.1.1.9


parent
1.3.6.1.2.1.37.1.1 (atmTrafficDescriptorTypes)
node code
9
node name
atmClpTransparentNoScr
dot oid
1.3.6.1.2.1.37.1.1.9
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmClpTransparentNoScr(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmClpTransparentNoScr(9)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmClpTransparentNoScr(9)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmClpTransparentNoScr(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmClpTransparentNoScr(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmTrafficDescriptorTypes(1) atmClpTransparentNoScr(9)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmClpTransparentNoScr
  • /iso/identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmClpTransparentNoScr
  • /iso/org/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmClpTransparentNoScr
  • /iso/org/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmClpTransparentNoScr
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmClpTransparentNoScr
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmTrafficDescriptorTypes/atmClpTransparentNoScr
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/37/1/1/9

    Description by circitor

    This traffic descriptor type is for the CLP-
    transparent model and no Sustained Cell Rate.
    The use of the parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.

    This traffic descriptor type is applicable to
    connections following the CBR.1 conformance
    definition.

    Connections specifying this traffic descriptor
    type will be rejected at UNI 3.0 or UNI 3.1
    interfaces. For a similar traffic descriptor
    type that can be accepted at UNI 3.0 and
    UNI 3.1 interfaces, see atmNoClpNoScr.

    Parsed from file ATM-TC-MIB.mib
    Module: ATM-TC-MIB

    Description by oid_info

    atmClpTransparentNoScr OBJECT-IDENTITY
    STATUS current
    DESCRIPTION
    "This traffic descriptor type is for the CLP-
    transparent model and no Sustained Cell Rate.
    The use of the parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.
    This traffic descriptor type is applicable to
    connections following the CBR.1 conformance
    definition.
    Connections specifying this traffic descriptor
    type will be rejected at UNI 3.0 or UNI 3.1
    interfaces. For a similar traffic descriptor
    type that can be accepted at UNI 3.0 and
    UNI 3.1 interfaces, see atmNoClpNoScr."
    REFERENCE
    "ATM Forum,ATM User-Network Interface,
    Version 3.0 (UNI 3.0) Specification, 1994.
    ATM Forum, ATM User-Network Interface,
    Version 3.1 (UNI 3.1) Specification,
    November 1994.
    ATM Forum, Traffic Management Specification,
    Version 4.0, af-tm-0056.000, June 1996."
    View at oid-info.com

    Description by mibdepot

    This traffic descriptor type is for the CLP-
    transparent model and no Sustained Cell Rate.
    The use of the parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.

    This traffic descriptor type is applicable to
    connections following the CBR.1 conformance
    definition.

    Connections specifying this traffic descriptor
    type will be rejected at UNI 3.0 or UNI 3.1
    interfaces. For a similar traffic descriptor
    type that can be accepted at UNI 3.0 and
    UNI 3.1 interfaces, see atmNoClpNoScr.

    Parsed from file ATM-TC-MIB.txt
    Company: None
    Module: ATM-TC-MIB

    Description by cisco

    This traffic descriptor type is for the CLP-
    transparent model and no Sustained Cell Rate.
    The use of the parameter vector for this type:
    Parameter 1: peak cell rate in cells/second
    for CLP=0+1 traffic
    Parameter 2: CDVT in tenths of microseconds
    Parameter 3: not used
    Parameter 4: not used
    Parameter 5: not used.

    This traffic descriptor type is applicable to
    connections following the CBR.1 conformance
    definition.

    Connections specifying this traffic descriptor
    type will be rejected at UNI 3.0 or UNI 3.1
    interfaces. For a similar traffic descriptor
    type that can be accepted at UNI 3.0 and
    UNI 3.1 interfaces, see atmNoClpNoScr.

    Information by circitor

    atmClpTransparentNoScr  OBJECT-IDENTITY
    STATUS  current
    DESCRIPTION
        "This traffic descriptor type is for the CLP-
        transparent model and no Sustained Cell Rate.
        The use of the parameter vector for this type:
        Parameter 1: peak cell rate in cells/second
                     for CLP=0+1 traffic
        Parameter 2: CDVT in tenths of microseconds
        Parameter 3: not used
        Parameter 4: not used
        Parameter 5: not used.

        This traffic descriptor type is applicable to
        connections following the CBR.1 conformance
        definition.

        Connections specifying this traffic descriptor
        type will be rejected at UNI 3.0 or UNI 3.1
        interfaces.  For a similar traffic descriptor
        type that can be accepted at UNI 3.0 and
        UNI 3.1 interfaces, see atmNoClpNoScr."
    REFERENCE
        "ATM Forum,ATM User-Network Interface,
           Version 3.0 (UNI 3.0) Specification, 1994.
         ATM Forum, ATM User-Network Interface,
           Version 3.1 (UNI 3.1) Specification,
           November 1994.
         ATM Forum, Traffic Management Specification,
           Version 4.0, af-tm-0056.000, June 1996."
    ::= {atmTrafficDescriptorTypes 9}

    Information by cisco_v1

    atmClpTransparentNoScr OBJECT IDENTIFIER ::= { atmTrafficDescriptorTypes 9 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    atmClpTransparentNoScr  OBJECT-IDENTITY
    STATUS  current
    DESCRIPTION
        "This traffic descriptor type is for the CLP-
        transparent model and no Sustained Cell Rate.
        The use of the parameter vector for this type:
        Parameter 1: peak cell rate in cells/second
                     for CLP=0+1 traffic
        Parameter 2: CDVT in tenths of microseconds
        Parameter 3: not used
        Parameter 4: not used
        Parameter 5: not used.

        This traffic descriptor type is applicable to
        connections following the CBR.1 conformance
        definition.

        Connections specifying this traffic descriptor
        type will be rejected at UNI 3.0 or UNI 3.1
        interfaces.  For a similar traffic descriptor
        type that can be accepted at UNI 3.0 and
        UNI 3.1 interfaces, see atmNoClpNoScr."
    REFERENCE
        "ATM Forum,ATM User-Network Interface,
           Version 3.0 (UNI 3.0) Specification, 1994.
         ATM Forum, ATM User-Network Interface,
           Version 3.1 (UNI 3.1) Specification,
           November 1994.
         ATM Forum, Traffic Management Specification,
           Version 4.0, af-tm-0056.000, June 1996."
    ::= {atmTrafficDescriptorTypes 9}

    Information by cisco

    atmClpTransparentNoScr  OBJECT-IDENTITY
    STATUS  current
    DESCRIPTION
        "This traffic descriptor type is for the CLP-
        transparent model and no Sustained Cell Rate.
        The use of the parameter vector for this type:
        Parameter 1: peak cell rate in cells/second
                     for CLP=0+1 traffic
        Parameter 2: CDVT in tenths of microseconds
        Parameter 3: not used
        Parameter 4: not used
        Parameter 5: not used.

        This traffic descriptor type is applicable to
        connections following the CBR.1 conformance
        definition.

        Connections specifying this traffic descriptor
        type will be rejected at UNI 3.0 or UNI 3.1
        interfaces.  For a similar traffic descriptor
        type that can be accepted at UNI 3.0 and
        UNI 3.1 interfaces, see atmNoClpNoScr."
    REFERENCE
        "ATM Forum,ATM User-Network Interface,
           Version 3.0 (UNI 3.0) Specification, 1994.
         ATM Forum, ATM User-Network Interface,
           Version 3.1 (UNI 3.1) Specification,
           November 1994.
         ATM Forum, Traffic Management Specification,
           Version 4.0, af-tm-0056.000, June 1996."
    ::= {atmTrafficDescriptorTypes 9}

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (14)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.37.1.1.1 atmNoTrafficDescriptor 0 0 This identifies the no ATM traffic
    descriptor type. Parameters 1, 2, 3, 4,
    and 5 are not used. This traffic descriptor
    type can …
    1.3.6.1.2.1.37.1.1.2 atmNoClpNoScr 0 0 This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1…
    1.3.6.1.2.1.37.1.1.3 atmClpNoTaggingNoScr 0 0 This traffic descriptor is for CLP without
    tagging and no Sustained Cell Rate. The use
    of the parameter vector for this type:
    Par…
    1.3.6.1.2.1.37.1.1.4 atmClpTaggingNoScr 0 0 This traffic descriptor is for CLP with
    tagging and no Sustained Cell Rate. The use
    of the parameter vector for this type:
    Parame…
    1.3.6.1.2.1.37.1.1.5 atmNoClpScr 0 0 This traffic descriptor type is for no CLP
    with Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: …
    1.3.6.1.2.1.37.1.1.6 atmClpNoTaggingScr 0 0 This traffic descriptor type is for CLP with
    Sustained Cell Rate and no tagging. The use
    of the parameter vector for this type:
    P…
    1.3.6.1.2.1.37.1.1.7 atmClpTaggingScr 0 0 This traffic descriptor type is for CLP with
    tagging and Sustained Cell Rate. The use of
    the parameter vector for this type:
    Para…
    1.3.6.1.2.1.37.1.1.8 atmClpNoTaggingMcr 0 0 This traffic descriptor type is for CLP with
    Minimum Cell Rate and no tagging. The use of
    the parameter vector for this type:
    Par…
    1.3.6.1.2.1.37.1.1.10 atmClpTransparentScr 0 0 This traffic descriptor type is for the CLP-
    transparent model with Sustained Cell Rate.
    The use of the parameter vector for this…
    1.3.6.1.2.1.37.1.1.11 atmNoClpTaggingNoScr 0 0 This traffic descriptor type is for no CLP
    with tagging and no Sustained Cell Rate. The
    use of the parameter vector for this typ…
    1.3.6.1.2.1.37.1.1.12 atmNoClpNoScrCdvt 0 0 This traffic descriptor type is for no CLP
    and no Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1…
    1.3.6.1.2.1.37.1.1.13 atmNoClpScrCdvt 0 0 This traffic descriptor type is for no CLP
    with Sustained Cell Rate. The use of the
    parameter vector for this type:
    Parameter 1: …
    1.3.6.1.2.1.37.1.1.14 atmClpNoTaggingScrCdvt 0 0 This traffic descriptor type is for CLP with
    Sustained Cell Rate and no tagging. The use
    of the parameter vector for this type:
    P…
    1.3.6.1.2.1.37.1.1.15 atmClpTaggingScrCdvt 0 0 This traffic descriptor type is for CLP with
    tagging and Sustained Cell Rate. The use of
    the parameter vector for this type:
    Para…