Reference record for OID 1.3.6.1.2.1.37.1.11.1.13


parent
1.3.6.1.2.1.37.1.11.1 (atmVcCrossConnectEntry)
node code
13
node name
atmVcCrossConnectRowStatus
dot oid
1.3.6.1.2.1.37.1.11.1.13
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVcCrossConnectTable(11) atmVcCrossConnectEntry(1) atmVcCrossConnectRowStatus(13)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVcCrossConnectTable(11) atmVcCrossConnectEntry(1) atmVcCrossConnectRowStatus(13)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVcCrossConnectTable(11) atmVcCrossConnectEntry(1) atmVcCrossConnectRowStatus(13)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVcCrossConnectTable(11) atmVcCrossConnectEntry(1) atmVcCrossConnectRowStatus(13)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVcCrossConnectTable(11) atmVcCrossConnectEntry(1) atmVcCrossConnectRowStatus(13)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVcCrossConnectTable(11) atmVcCrossConnectEntry(1) atmVcCrossConnectRowStatus(13)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVcCrossConnectTable/atmVcCrossConnectEntry/atmVcCrossConnectRowStatus
  • /iso/identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVcCrossConnectTable/atmVcCrossConnectEntry/atmVcCrossConnectRowStatus
  • /iso/org/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVcCrossConnectTable/atmVcCrossConnectEntry/atmVcCrossConnectRowStatus
  • /iso/org/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVcCrossConnectTable/atmVcCrossConnectEntry/atmVcCrossConnectRowStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVcCrossConnectTable/atmVcCrossConnectEntry/atmVcCrossConnectRowStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVcCrossConnectTable/atmVcCrossConnectEntry/atmVcCrossConnectRowStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/37/1/11/1/13

    Description by circitor

    The status of this entry in the
    atmVcCrossConnectTable. This object is used to
    create a new cross-connect for cross-connecting
    VCLs which are created using the atmVclTable
    or to change or delete existing cross-connect.
    This object must be initially set to
    `createAndWait' or 'createAndGo'. This object
    cannot be set to `active' unless the following
    columnar object exists in this row:
    atmVcCrossConnectAdminStatus.
    To turn on a VC cross-connect,
    the atmVcCrossConnectAdminStatus
    is set to `up'.

    Parsed from file ATM-MIB.mib
    Module: ATM-MIB

    Description by cisco_v1

    The status of this entry in the
    atmVcCrossConnectTable. This object is used to
    create a new cross-connect for cross-connecting
    VCLs which are created using the atmVclTable
    or to change or delete existing cross-connect.
    This object must be initially set to
    `createAndWait' or 'createAndGo'.
    To turn on a VC cross-connect,
    the atmVcCrossConnectAdminStatus
    is set to `up'.

    Description by oid_info

    atmVcCrossConnectRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The status of this entry in the
    atmVcCrossConnectTable. This object is used to
    create a new cross-connect for cross-connecting
    VCLs which are created using the atmVclTable
    or to change or delete existing cross-connect.
    This object must be initially set to
    `createAndWait or createAndGo. This object
    cannot be set to `active unless the following
    columnar object exists in this row:
    atmVcCrossConnectAdminStatus.
    To turn on a VC cross-connect,
    the atmVcCrossConnectAdminStatus
    is set to `up."
    View at oid-info.com

    Description by mibdepot

    The status of this entry in the
    atmVcCrossConnectTable. This object is used to
    create a new cross-connect for cross-connecting
    VCLs which are created using the atmVclTable
    or to change or delete existing cross-connect.
    This object must be initially set to
    `createAndWait' or 'createAndGo'. This object
    cannot be set to `active' unless the following
    columnar object exists in this row:
    atmVcCrossConnectAdminStatus.
    To turn on a VC cross-connect,
    the atmVcCrossConnectAdminStatus
    is set to `up'.

    Parsed from file ATM-MIB.txt
    Company: None
    Module: ATM-MIB

    Description by cisco

    The status of this entry in the
    atmVcCrossConnectTable. This object is used to
    create a new cross-connect for cross-connecting
    VCLs which are created using the atmVclTable
    or to change or delete existing cross-connect.
    This object must be initially set to
    `createAndWait' or 'createAndGo'.
    To turn on a VC cross-connect,
    the atmVcCrossConnectAdminStatus
    is set to `up'.

    Information by circitor

    atmVcCrossConnectRowStatus OBJECT-TYPE
                    SYNTAX  RowStatus
                    MAX-ACCESS  read-create
                    STATUS  current
                    DESCRIPTION
                     "The status of this entry in the
                      atmVcCrossConnectTable.  This object is used to
                      create a new cross-connect for cross-connecting
                      VCLs which are created using the atmVclTable
                      or to change or delete existing cross-connect.
                      This object must be initially set to
                      `createAndWait' or 'createAndGo'.  This object
                      cannot be set to `active' unless the following
                      columnar object exists in this row:
                      atmVcCrossConnectAdminStatus.
                      To turn on a VC cross-connect,
                      the atmVcCrossConnectAdminStatus
                      is set to `up'."
                    ::= { atmVcCrossConnectEntry 13 }

    Information by cisco_v1

    atmVcCrossConnectRowStatus OBJECT-TYPE
    SYNTAX RowStatus








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this entry in the
         atmVcCrossConnectTable.  This object is used to
         create a new cross-connect for cross-connecting
         VCLs which are created using the atmVclTable
         or to change or delete existing cross-connect.
         This object must be initially set to
         `createAndWait' or 'createAndGo'.
         To turn on a VC cross-connect,
         the atmVcCrossConnectAdminStatus
         is set to `up'."
    DEFVAL { createAndWait }
    ::= { atmVcCrossConnectEntry 13 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    atmVcCrossConnectRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
           "The status of this entry in the
                      atmVcCrossConnectTable.  This object is used to
                      create a new cross-connect for cross-connecting
                      VCLs which are created using the atmVclTable
                      or to change or delete existing cross-connect.
                      This object must be initially set to
                      `createAndWait' or 'createAndGo'.  This object
                      cannot be set to `active' unless the following
                      columnar object exists in this row:
                      atmVcCrossConnectAdminStatus.
                      To turn on a VC cross-connect,
                      the atmVcCrossConnectAdminStatus
                      is set to `up'."
    ::= { atmVcCrossConnectEntry  13 }

    Information by cisco

    atmVcCrossConnectRowStatus OBJECT-TYPE
          SYNTAX         RowStatus
          MAX-ACCESS     read-create
          STATUS         current
          DESCRIPTION
           "The status of this entry in the
            atmVcCrossConnectTable.  This object is used to
            create a new cross-connect for cross-connecting
            VCLs which are created using the atmVclTable
            or to change or delete existing cross-connect.
            This object must be initially set to
            `createAndWait' or 'createAndGo'.
            To turn on a VC cross-connect,
            the atmVcCrossConnectAdminStatus
            is set to `up'."
          DEFVAL { createAndWait }
          ::= { atmVcCrossConnectEntry 13 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (12)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.37.1.11.1.1 atmVcCrossConnectIndex 0 0 A unique value to identify this VC cross-connect.
    1.3.6.1.2.1.37.1.11.1.2 atmVcCrossConnectLowIfIndex 0 0 The ifIndex value of the ATM interface for this
    VC cross-connect. The term low implies
    that this ATM interface has the numericall…
    1.3.6.1.2.1.37.1.11.1.3 atmVcCrossConnectLowVpi 0 0 The VPI value at the ATM interface
    associated with the VC cross-connect that is
    identified by atmVcCrossConnectLowIfIndex.
    1.3.6.1.2.1.37.1.11.1.4 atmVcCrossConnectLowVci 0 0 The VCI value at the ATM interface
    associated with this VC cross-connect that is
    identified by atmVcCrossConnectLowIfIndex.
    1.3.6.1.2.1.37.1.11.1.5 atmVcCrossConnectHighIfIndex 0 0 The ifIndex value for the ATM interface for
    this VC cross-connect. The term high implies
    that this ATM interface has the numerica…
    1.3.6.1.2.1.37.1.11.1.6 atmVcCrossConnectHighVpi 0 0 The VPI value at the ATM interface
    associated with the VC cross-connect that is
    identified by atmVcCrossConnectHighIfIndex.
    1.3.6.1.2.1.37.1.11.1.7 atmVcCrossConnectHighVci 0 0 The VCI value at the ATM interface
    associated with the VC cross-connect that is
    identified by atmVcCrossConnectHighIfIndex.
    1.3.6.1.2.1.37.1.11.1.8 atmVcCrossConnectAdminStatus 0 0 The desired administrative status of this
    bi-directional VC cross-connect.
    1.3.6.1.2.1.37.1.11.1.9 atmVcCrossConnectL2HOperStatus 0 0 The current operational status of the
    VC cross-connect in one direction; (i.e.,
    from the low to high direction).
    1.3.6.1.2.1.37.1.11.1.10 atmVcCrossConnectH2LOperStatus 0 0 The current operational status of the
    VC cross-connect in one direction; (i.e.,
    from the high to low direction).
    1.3.6.1.2.1.37.1.11.1.11 atmVcCrossConnectL2HLastChange 0 0 The value of sysUpTime at the time this
    VC cross-connect entered its current
    operational state in low to high direction.
    1.3.6.1.2.1.37.1.11.1.12 atmVcCrossConnectH2LLastChange 0 0 The value of sysUpTime at the time this
    VC cross-connect entered its current
    operational state in high to low direction.