This table contains ATM interface configuration and monitoring
information not defined in the atmInterfaceConfTable from the
ATM-MIB. This includes the type of connection setup procedures,
ILMI information, and information on the VPI/VCI range.
atmInterfaceExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmInterfaceExtEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains ATM interface configuration and monitoring
information not defined in the atmInterfaceConftable from the
ATM-MIB. This includes the type of connection setup procedures,
ILMI information, and information on the VPI/VCI range."
REFERENCE
"Tesink, K., Editor, Definitions of Managed Objects
for ATM Management, RFC 2515, Bell Communications
Research, February, 1999."
View at oid-info.com
This table contains ATM interface configuration and monitoring
information not defined in the atmInterfaceConfTable from the
ATM-MIB. This includes the type of connection setup procedures,
ILMI information, and information on the VPI/VCI range.
This table contains ATM interface configuration and
monitoring information not defined in the
atmInterfaceConfTable from the ATM-MIB. This includes
the type of connection setup procedures, ILMI
information, and information on the VPI/VCI range.
Parsed from file ATM2-MIB.mib
Module: ATM2-MIB
atmInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceExtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains ATM interface configuration and monitoring information not defined in the atmInterfaceConfTable from the ATM-MIB. This includes the type of connection setup procedures, ILMI information, and information on the VPI/VCI range." REFERENCE "Tesink, K., Editor, Definitions of Managed Objects for ATM Management, RFC 2515, Bell Communications Research, February, 1999." ::= { atm2MIBObjects 14 }
Automatically extracted from RFC3606
atmInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM interface configuration and monitoring information not defined in the atmInterfaceConfTable from the ATM-MIB. This includes the type of connection setup procedures, ILMI information, and information on the VPI/VCI range." REFERENCE "Tesink, K., Editor, Definitions of Managed Objects for ATM Management, RFC 2515, Bell Communications Research, February, 1999." ::= { atm2MIBObjects 14 }
atmInterfaceExtTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmInterfaceExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains ATM interface configuration and monitoring information not defined in the atmInterfaceConfTable from the ATM-MIB. This includes the type of connection setup procedures, ILMI information, and information on the VPI/VCI range." REFERENCE "Tesink, K., Editor, Definitions of Managed Objects for ATM Management, RFC 2515, Bell Communications Research, February, 1999." ::= { atm2MIBObjects 14 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.37.1.14.1.14.1 | atmInterfaceExtEntry | 26 | 26 | An entry extends the atmInterfaceConfEntry defined in the ATM- MIB. Each entry corresponds to an ATM interface. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.37.1.14.1.1 | atmSvcVpCrossConnectTable | 1 | 8 | The ATM SVPC Cross-Connect table. A bi-directional VP cross-connect between two switched VPLs is modeled as one entry in this tab… |
| 1.3.6.1.2.1.37.1.14.1.2 | atmSvcVcCrossConnectTable | 1 | 10 | The ATM SVCC Cross-Connect table. A bi-directional VC cross-connect between two switched VCLs is modeled as one entry in this tab… |
| 1.3.6.1.2.1.37.1.14.1.3 | atmSigStatTable | 1 | 21 | This table contains ATM interface signalling statistics, one entry per ATM signalling interface. |
| 1.3.6.1.2.1.37.1.14.1.4 | atmSigSupportTable | 1 | 9 | This table contains ATM local interface configuration parameters, one entry per ATM signalling interface. |
| 1.3.6.1.2.1.37.1.14.1.5 | atmSigDescrParamTable | 1 | 13 | A table contains signalling capabilities of VCLs except the Traffic Descriptor. Traffic descriptors are described in the atmTraf… |
| 1.3.6.1.2.1.37.1.14.1.6 | atmIfRegisteredAddrTable | 1 | 5 | This table contains a list of ATM addresses that can be used for calls to and from a given interface by a switch or service. Th… |
| 1.3.6.1.2.1.37.1.14.1.7 | atmVclAddrTable | 1 | 4 | This table provides a mapping between the atmVclTable and the ATM called party/calling party address. This table can be used to … |
| 1.3.6.1.2.1.37.1.14.1.8 | atmAddrVclTable | 1 | 5 | This table provides an alternative way to retrieve the atmVclTable. This table can be used to retrieve the indexing to the atmVc… |
| 1.3.6.1.2.1.37.1.14.1.9 | atmVplStatTable | 1 | 8 | This table contains all statistics counters per VPL. It is used to monitor the usage of the VPL in terms of incoming cells and o… |
| 1.3.6.1.2.1.37.1.14.1.10 | atmVplLogicalPortTable | 1 | 3 | Indicates whether the VPL is an ATM Logical Port interface (ifType=80). |
| 1.3.6.1.2.1.37.1.14.1.11 | atmVclStatTable | 1 | 8 | This table contains all statistics counters per VCL. It is used to monitor the usage of the VCL in terms of incoming cells and o… |
| 1.3.6.1.2.1.37.1.14.1.12 | atmAal5VclStatTable | 1 | 5 | This table provides a collection of objects providing AAL5 configuration and performance statistics of a VCL. |
| 1.3.6.1.2.1.37.1.14.1.13 | atmVclGenTable | 1 | 2 | General Information for each VC. |
| 1.3.6.1.2.1.37.1.14.1.15 | atmIlmiSrvcRegTable | 1 | 7 | This table contains a list of all the ATM network services known by this device. The characteristics of these services are made a… |
| 1.3.6.1.2.1.37.1.14.1.16 | atmIlmiNetworkPrefixTable | 1 | 3 | A table specifying per-interface network prefix(es) supplied by the network side of the UNI during ILMI address registration. Whe… |
| 1.3.6.1.2.1.37.1.14.1.17 | atmSwitchAddressTable | 1 | 4 | This table contains one or more ATM endsystem addresses on a per-switch basis. These addresses are used to identify the switch. … |
| 1.3.6.1.2.1.37.1.14.1.18 | atmVpCrossConnectXTable | 1 | 3 | This table contains one row per VP Cross-Connect represented in the atmVpCrossConnectTable. |
| 1.3.6.1.2.1.37.1.14.1.19 | atmVcCrossConnectXTable | 1 | 3 | This table contains one row per VC Cross-Connect represented in the atmVcCrossConnectTable. |
| 1.3.6.1.2.1.37.1.14.1.20 | atmCurrentlyFailingPVplTable | 1 | 2 | A table indicating all VPLs for which there is an active row in the atmVplTable having an atmVplConnKind value of `pvc' and an at… |
| 1.3.6.1.2.1.37.1.14.1.21 | atmCurrentlyFailingPVclTable | 1 | 2 | A table indicating all VCLs for which there is an active row in the atmVclTable having an atmVclConnKind value of `pvc' and an at… |