Reference record for OID 1.3.6.1.2.1.37.1.14.1.5.1.7



parent
1.3.6.1.2.1.37.1.14.1.5.1 (atmSigDescrParamEntry)
node code
7
node name
atmSigDescrParamBlliLayer2
dot oid
1.3.6.1.2.1.37.1.14.1.5.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atm2MIB(14) atm2MIBObjects(1) atmSigDescrParamTable(5) atmSigDescrParamEntry(1) atmSigDescrParamBlliLayer2(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atm2MIB(14) atm2MIBObjects(1) atmSigDescrParamTable(5) atmSigDescrParamEntry(1) atmSigDescrParamBlliLayer2(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atm2MIB(14) atm2MIBObjects(1) atmSigDescrParamTable(5) atmSigDescrParamEntry(1) atmSigDescrParamBlliLayer2(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atm2MIB(14) atm2MIBObjects(1) atmSigDescrParamTable(5) atmSigDescrParamEntry(1) atmSigDescrParamBlliLayer2(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atm2MIB(14) atm2MIBObjects(1) atmSigDescrParamTable(5) atmSigDescrParamEntry(1) atmSigDescrParamBlliLayer2(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atm2MIB(14) atm2MIBObjects(1) atmSigDescrParamTable(5) atmSigDescrParamEntry(1) atmSigDescrParamBlliLayer2(7)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atm2MIB/atm2MIBObjects/atmSigDescrParamTable/atmSigDescrParamEntry/atmSigDescrParamBlliLayer2
  • /iso/identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atm2MIB/atm2MIBObjects/atmSigDescrParamTable/atmSigDescrParamEntry/atmSigDescrParamBlliLayer2
  • /iso/org/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atm2MIB/atm2MIBObjects/atmSigDescrParamTable/atmSigDescrParamEntry/atmSigDescrParamBlliLayer2
  • /iso/org/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atm2MIB/atm2MIBObjects/atmSigDescrParamTable/atmSigDescrParamEntry/atmSigDescrParamBlliLayer2
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atm2MIB/atm2MIBObjects/atmSigDescrParamTable/atmSigDescrParamEntry/atmSigDescrParamBlliLayer2
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atm2MIB/atm2MIBObjects/atmSigDescrParamTable/atmSigDescrParamEntry/atmSigDescrParamBlliLayer2
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/37/1/14/1/5/1/7

    Description by cisco_v1

    The Broadband low layer information, protocol type of layer
    2. The value of this object is other(1) if layer 2 protocol
    is not used.

    Description by oid_info

    atmSigDescrParamBlliLayer2 OBJECT-TYPE
    SYNTAX INTEGER {
    other(1), -- not specified
    iso1745(2), -- Basic mode ISO 1745
    q921(3), -- CCITT Recommendation Q.921
    x25linklayer(4), -- CCITT Recommendation X.25
    -- Link Layer
    x25multilink(5), -- CCITT Recommendation X.25
    -- Multilink
    lapb(6), -- Extended LAPB; for half
    -- duplex operation
    hdlcArm(7), -- HDLC ARM (ISO 4335)
    hdlcNrm(8), -- HDLC NRM (ISO 4335)
    hdlcAbm(9), -- HDLC ABM (ISO 4335)
    iso88022(10), -- LAN logical link control
    -- (ISO 8802/2)
    x75slp(11), -- CCITT Recommendation X.75,
    -- single link
    -- procedure (SLP)
    q922(12), -- CCITT Recommendation Q.922
    userDef(13), -- User specified
    iso7776(14) -- ISO 7776 DTE-DTE operation
    }
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The Broadband low layer information, protocol type of layer
    2. The value of this object is other(1) if layer 2 protocol
    is not used."
    DEFVAL { other }
    View at oid-info.com

    Description by cisco

    The Broadband low layer information, protocol type of layer
    2. The value of this object is other(1) if layer 2 protocol
    is not used.

    Description by circitor

    The Broadband low layer information, protocol
    type of layer 2. The value of this object is
    other(1) if layer 2 protocol is not used.

    Parsed from file ATM2-MIB.mib
    Module: ATM2-MIB

    Information by cisco_v1

    atmSigDescrParamBlliLayer2 OBJECT-TYPE
    SYNTAX INTEGER {
        other(1),
        iso1745(2),
        q921(3),
        x25linklayer(4),
        x25multilink(5),
        lapb(6),
        hdlcArm(7),
        hdlcNrm(8),
        hdlcAbm(9),
        iso88022(10),
        x75slp(11),
        q922(12),
        userDef(13),
        iso7776(14)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The Broadband low layer information, protocol type of layer
        2.  The value of this object is other(1) if layer 2 protocol
        is not used."
    DEFVAL { other }
    ::= { atmSigDescrParamEntry 7 }

    Information by oid_info

    Automatically extracted from RFC3606

    Information by cisco

    atmSigDescrParamBlliLayer2 OBJECT-TYPE
          SYNTAX       INTEGER {
             other(1),        
             iso1745(2),      
             q921(3),         
             x25linklayer(4), 
                              
             x25multilink(5), 
                              
             lapb(6),         

                              
             hdlcArm(7),      
             hdlcNrm(8),      
             hdlcAbm(9),      
             iso88022(10),    
                              
             x75slp(11),      
                              
                              
             q922(12),        
             userDef(13),     
             iso7776(14)      
             }
          MAX-ACCESS   read-create
          STATUS       current
          DESCRIPTION
            "The Broadband low layer information, protocol type of layer
            2.  The value of this object is other(1) if layer 2 protocol
            is not used."

          DEFVAL { other }
          ::= { atmSigDescrParamEntry 7 }

    Information by circitor

    atmSigDescrParamBlliLayer2 OBJECT-TYPE
                    SYNTAX       INTEGER {
                       other(1),        
                       iso1745(2),      
                       q921(3),         
                       x25linklayer(4), 
                                        
                       x25multilink(5), 
                                        
                       lapb(6),         
                                        
                       hdlcArm(7),      
                       hdlcNrm(8),      
                       hdlcAbm(9),      
                       iso88022(10),    
                                        
                       x75slp(11),      
                                        
                                        
                       q922(12),        
                       userDef(13),     
                       iso7776(14)      
                       }
                    MAX-ACCESS   read-create
                    STATUS       current
                    DESCRIPTION
                      "The Broadband low layer information, protocol
                      type of layer 2.  The value of this object is
                      other(1) if layer 2 protocol is not used."
                    DEFVAL { other }
                    ::= { atmSigDescrParamEntry 7 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (11)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.37.1.14.1.5.1.1 atmSigDescrParamIndex 0 0 The value of this object is used by the
    atmVclGenSigDescrIndex object in the atmVclGenTable to
    identify a row in this table.
    1.3.6.1.2.1.37.1.14.1.5.1.2 atmSigDescrParamAalType 0 0 The AAL type. The value of this object is set to other(1)
    when not defined.
    1.3.6.1.2.1.37.1.14.1.5.1.3 atmSigDescrParamAalSscsType 0 0 The SSCS type used by this entry.
    1.3.6.1.2.1.37.1.14.1.5.1.4 atmSigDescrParamBhliType 0 0 The Broadband high layer type.
    1.3.6.1.2.1.37.1.14.1.5.1.5 atmSigDescrParamBhliInfo 0 0 The Broadband high layer information. When
    atmSigDescrParamBhliType is set to iso(2), the value of this
    object is a zero length …
    1.3.6.1.2.1.37.1.14.1.5.1.6 atmSigDescrParamBbcConnConf 0 0 The Broadband bearer capability user plane connection
    configuration parameter.
    1.3.6.1.2.1.37.1.14.1.5.1.8 atmSigDescrParamBlliLayer3 0 0 The Broadband low layer information, protocol
    type of layer 3. The value of this object is
    other(1) if layer 3 protocol is not u…
    1.3.6.1.2.1.37.1.14.1.5.1.9 atmSigDescrParamBlliPktSize 0 0 The default packet size defined in B-LLI.
    1.3.6.1.2.1.37.1.14.1.5.1.10 atmSigDescrParamBlliSnapId 0 0 The SNAP ID used for Broadband low layer protocol layer 3.
    The value of this object is other(1) if
    atmSigDescrParamBlliLayer3 is …
    1.3.6.1.2.1.37.1.14.1.5.1.11 atmSigDescrParamBlliOuiPid 0 0 The OUI/PID encoding for Broadband low layer protocol layer
    3. The value of this object is a zero length string if
    atmSigDescrPa…
    1.3.6.1.2.1.37.1.14.1.5.1.12 atmSigDescrParamRowStatus 0 0 This object is used to create and delete rows in the
    atmSigDescrParamTable.