Reference record for OID 1.3.6.1.2.1.37.1.7.1.13


parent
1.3.6.1.2.1.37.1.7.1 (atmVclEntry)
node code
13
node name
atmVclRowStatus
dot oid
1.3.6.1.2.1.37.1.7.1.13
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVclTable(7) atmVclEntry(1) atmVclRowStatus(13)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVclTable(7) atmVclEntry(1) atmVclRowStatus(13)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVclTable(7) atmVclEntry(1) atmVclRowStatus(13)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVclTable(7) atmVclEntry(1) atmVclRowStatus(13)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVclTable(7) atmVclEntry(1) atmVclRowStatus(13)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVclTable(7) atmVclEntry(1) atmVclRowStatus(13)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVclTable/atmVclEntry/atmVclRowStatus
  • /iso/identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVclTable/atmVclEntry/atmVclRowStatus
  • /iso/org/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVclTable/atmVclEntry/atmVclRowStatus
  • /iso/org/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVclTable/atmVclEntry/atmVclRowStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVclTable/atmVclEntry/atmVclRowStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVclTable/atmVclEntry/atmVclRowStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/37/1/7/1/13

    Description by circitor

    This object is used to create, delete or
    modify a row in this table. To create
    a new VCL, this object is initially set
    to 'createAndWait' or 'createAndGo'.
    This object must not be set to 'active'
    unless the following columnar objects exist
    in this row:
    atmVclReceiveTrafficDescrIndex,
    atmVclTransmitTrafficDescrIndex.
    In addition, if the local VCL end-point
    is also the VCC end-point:
    atmVccAalType.
    In addition, for AAL5 connections only:
    atmVccAal5CpcsTransmitSduSize,
    atmVccAal5CpcsReceiveSduSize, and
    atmVccAal5EncapsType.

    Parsed from file ATM-MIB.mib
    Module: ATM-MIB

    Description by cisco_v1

    This object is used to create, delete or
    modify a row in this table. To create
    a new VCL, this object is initially set
    to 'createAndWait' or 'createAndGo'.
    This object should not be
    set to 'active' unless the following columnar
    objects have been set to their desired value
    in this row:
    atmVclReceiveTrafficDescrIndex,
    atmVclTransmitTrafficDescrIndex.
    In addition, if the local VCL end-point
    is also the VCC end-point:
    atmVccAalType.
    In addition, for AAL5 connections only:
    atmVccAal5CpcsTransmitSduSize,
    atmVccAal5CpcsReceiveSduSize, and
    atmVccAal5EncapsType. (The existence
    of these objects imply the AAL connection type.).
    The DESCRIPTION of atmVclEntry provides
    further guidance to row treatment in this table.

    Description by oid_info

    atmVclRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "This object is used to create, delete or
    modify a row in this table. To create
    a new VCL, this object is initially set
    to createAndWait or createAndGo.
    This object must not be set to active
    unless the following columnar objects exist
    in this row:
    atmVclReceiveTrafficDescrIndex,
    atmVclTransmitTrafficDescrIndex.
    In addition, if the local VCL end-point
    is also the VCC end-point:
    atmVccAalType.
    In addition, for AAL5 connections only:
    atmVccAal5CpcsTransmitSduSize,
    atmVccAal5CpcsReceiveSduSize, and
    atmVccAal5EncapsType."
    DEFVAL { active }
    View at oid-info.com

    Description by mibdepot

    This object is used to create, delete or
    modify a row in this table. To create
    a new VCL, this object is initially set
    to 'createAndWait' or 'createAndGo'.
    This object must not be set to 'active'
    unless the following columnar objects exist
    in this row:
    atmVclReceiveTrafficDescrIndex,
    atmVclTransmitTrafficDescrIndex.












    In addition, if the local VCL end-point
    is also the VCC end-point:
    atmVccAalType.
    In addition, for AAL5 connections only:
    atmVccAal5CpcsTransmitSduSize,
    atmVccAal5CpcsReceiveSduSize, and
    atmVccAal5EncapsType.

    Parsed from file ATM-MIB.txt
    Company: None
    Module: ATM-MIB

    Description by cisco

    This object is used to create, delete or
    modify a row in this table. To create
    a new VCL, this object is initially set
    to 'createAndWait' or 'createAndGo'.
    This object should not be
    set to 'active' unless the following columnar
    objects have been set to their desired value
    in this row:
    atmVclReceiveTrafficDescrIndex,
    atmVclTransmitTrafficDescrIndex.
    In addition, if the local VCL end-point
    is also the VCC end-point:
    atmVccAalType.
    In addition, for AAL5 connections only:
    atmVccAal5CpcsTransmitSduSize,
    atmVccAal5CpcsReceiveSduSize, and
    atmVccAal5EncapsType. (The existence
    of these objects imply the AAL connection type.).
    The DESCRIPTION of atmVclEntry provides
    further guidance to row treatment in this table.

    Information by circitor

    atmVclRowStatus          OBJECT-TYPE
                    SYNTAX       RowStatus
                    MAX-ACCESS   read-create
                    STATUS       current
                    DESCRIPTION
                     "This object is used to create, delete or
                      modify a row in this table.  To create
                      a new VCL, this object is initially set
                      to 'createAndWait' or 'createAndGo'.
                      This object must not be set to 'active'
                      unless the following columnar objects exist
                      in this row:
                      atmVclReceiveTrafficDescrIndex,
                      atmVclTransmitTrafficDescrIndex.
                      In addition, if the local VCL end-point
                      is also the VCC end-point:
                      atmVccAalType.
                      In addition, for AAL5 connections only:
                      atmVccAal5CpcsTransmitSduSize,
                      atmVccAal5CpcsReceiveSduSize, and
                      atmVccAal5EncapsType."
                    DEFVAL { active }
                          ::= {atmVclEntry 13}

    Information by cisco_v1

    atmVclRowStatus OBJECT-TYPE
    SYNTAX RowStatus








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "This object is used to create, delete or
         modify a row in this table.  To create
         a new VCL, this object is initially set
         to 'createAndWait' or 'createAndGo'.
         This object should not be
         set to 'active' unless the following columnar
         objects have been set to their desired value
         in this row:
         atmVclReceiveTrafficDescrIndex,
         atmVclTransmitTrafficDescrIndex.
         In addition, if the local VCL end-point
         is also the VCC end-point:
         atmVccAalType.
         In addition, for AAL5 connections only:
         atmVccAal5CpcsTransmitSduSize,
         atmVccAal5CpcsReceiveSduSize, and
         atmVccAal5EncapsType. (The existence
         of these objects imply the AAL connection type.).
         The DESCRIPTION of atmVclEntry provides
         further guidance to row treatment in this table."
    DEFVAL { createAndWait }
    ::= { atmVclEntry 13 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    atmVclRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
           "This object is used to create, delete or
                             modify a row in this table.  To create
                             a new VCL, this object is initially set
                             to 'createAndWait' or 'createAndGo'.
                             This object must not be set to 'active'
                             unless the following columnar objects exist
                             in this row:
                             atmVclReceiveTrafficDescrIndex,
                             atmVclTransmitTrafficDescrIndex.












                             In addition, if the local VCL end-point
                             is also the VCC end-point:
                             atmVccAalType.
                             In addition, for AAL5 connections only:
                             atmVccAal5CpcsTransmitSduSize,
                             atmVccAal5CpcsReceiveSduSize, and
                             atmVccAal5EncapsType."
    DEFVAL  { active }
    ::= { atmVclEntry  13 }

    Information by cisco

    atmVclRowStatus     OBJECT-TYPE
          SYNTAX         RowStatus
          MAX-ACCESS     read-create
          STATUS         current
          DESCRIPTION
           "This object is used to create, delete or
            modify a row in this table.  To create
            a new VCL, this object is initially set
            to 'createAndWait' or 'createAndGo'.
            This object should not be
            set to 'active' unless the following columnar
            objects have been set to their desired value
            in this row:
            atmVclReceiveTrafficDescrIndex,
            atmVclTransmitTrafficDescrIndex.
            In addition, if the local VCL end-point
            is also the VCC end-point:
            atmVccAalType.
            In addition, for AAL5 connections only:
            atmVccAal5CpcsTransmitSduSize,
            atmVccAal5CpcsReceiveSduSize, and
            atmVccAal5EncapsType. (The existence
            of these objects imply the AAL connection type.).
            The DESCRIPTION of atmVclEntry provides
            further guidance to row treatment in this table."
          DEFVAL { createAndWait }
                ::= {atmVclEntry 13}

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (14)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.37.1.7.1.1 atmVclVpi 0 0 The VPI value of the VCL.
    1.3.6.1.2.1.37.1.7.1.2 atmVclVci 0 0 The VCI value of the VCL.
    1.3.6.1.2.1.37.1.7.1.3 atmVclAdminStatus 0 0 This object is instanciated only for a VCL which
    terminates a VCC (i.e., one which is NOT
    cross-connected to other VCLs). Its val…
    1.3.6.1.2.1.37.1.7.1.4 atmVclOperStatus 0 0 The current operational status of the VCL.
    1.3.6.1.2.1.37.1.7.1.5 atmVclLastChange 0 0 The value of sysUpTime at the time this VCL
    entered its current operational state.
    1.3.6.1.2.1.37.1.7.1.6 atmVclReceiveTrafficDescrIndex 0 0 The value of this object identifies the row
    in the ATM Traffic Descriptor Table which
    applies to the receive direction of this VC…
    1.3.6.1.2.1.37.1.7.1.7 atmVclTransmitTrafficDescrIndex 0 0 The value of this object identifies the row
    of the ATM Traffic Descriptor Table which applies
    to the transmit direction of this V…
    1.3.6.1.2.1.37.1.7.1.8 atmVccAalType 0 0 An instance of this object only exists when the
    local VCL end-point is also the VCC end-point,
    and AAL is in use.
    The type of AAL …
    1.3.6.1.2.1.37.1.7.1.9 atmVccAal5CpcsTransmitSduSize 0 0 An instance of this object only exists when the
    local VCL end-point is also the VCC end-point,
    and AAL5 is in use.
    The maximum AAL…
    1.3.6.1.2.1.37.1.7.1.10 atmVccAal5CpcsReceiveSduSize 0 0 An instance of this object only exists when the
    local VCL end-point is also the VCC end-point,
    and AAL5 is in use.
    The maximum AAL…
    1.3.6.1.2.1.37.1.7.1.11 atmVccAal5EncapsType 0 0 An instance of this object only exists when the
    local VCL end-point is also the VCC end-point,
    and AAL5 is in use.
    The type of dat…
    1.3.6.1.2.1.37.1.7.1.12 atmVclCrossConnectIdentifier 0 0 This object is implemented only for a VCL
    which is cross-connected to other VCLs
    that belong to the same VCC. All such
    associated…
    1.3.6.1.2.1.37.1.7.1.14 atmVclCastType 0 0 The connection topology type.
    1.3.6.1.2.1.37.1.7.1.15 atmVclConnKind 0 0 The use of call control.