Reference record for OID 1.3.6.1.2.1.37.1.9.1.11


parent
1.3.6.1.2.1.37.1.9.1 (atmVpCrossConnectEntry)
node code
11
node name
atmVpCrossConnectRowStatus
dot oid
1.3.6.1.2.1.37.1.9.1.11
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVpCrossConnectTable(9) atmVpCrossConnectEntry(1) atmVpCrossConnectRowStatus(11)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVpCrossConnectTable(9) atmVpCrossConnectEntry(1) atmVpCrossConnectRowStatus(11)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVpCrossConnectTable(9) atmVpCrossConnectEntry(1) atmVpCrossConnectRowStatus(11)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVpCrossConnectTable(9) atmVpCrossConnectEntry(1) atmVpCrossConnectRowStatus(11)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) atmMIB(37) atmMIBObjects(1) atmVpCrossConnectTable(9) atmVpCrossConnectEntry(1) atmVpCrossConnectRowStatus(11)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) atmMIB(37) atmMIBObjects(1) atmVpCrossConnectTable(9) atmVpCrossConnectEntry(1) atmVpCrossConnectRowStatus(11)}
    • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVpCrossConnectTable/atmVpCrossConnectEntry/atmVpCrossConnectRowStatus
  • /iso/identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVpCrossConnectTable/atmVpCrossConnectEntry/atmVpCrossConnectRowStatus
  • /iso/org/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVpCrossConnectTable/atmVpCrossConnectEntry/atmVpCrossConnectRowStatus
  • /iso/org/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVpCrossConnectTable/atmVpCrossConnectEntry/atmVpCrossConnectRowStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/atmMIB/atmMIBObjects/atmVpCrossConnectTable/atmVpCrossConnectEntry/atmVpCrossConnectRowStatus
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/atmMIB/atmMIBObjects/atmVpCrossConnectTable/atmVpCrossConnectEntry/atmVpCrossConnectRowStatus
    • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/37/1/9/1/11

    Description by circitor

    The status of this entry in the
    atmVpCrossConnectTable. This object is used to
    create a cross-connect for cross-connecting
    VPLs which are created using the atmVplTable
    or to change or delete an existing cross-connect.
    This object must be initially set
    to `createAndWait' or 'createAndGo'.
    This object cannot be set to `active'
    unless the following columnar object exists
    in this row: atmVpCrossConnectAdminStatus.
    To turn on a VP cross-connect,
    the atmVpCrossConnectAdminStatus
    is set to `up'.

    Parsed from file ATM-MIB.mib
    Module: ATM-MIB

    Description by cisco_v1

    The status of this entry in the
    atmVpCrossConnectTable. This object is used to
    create a cross-connect for cross-connecting
    VPLs which are created using the atmVplTable
    or to change or delete an existing cross-connect.
    This object must be initially set
    to `createAndWait' or 'createAndGo'.
    To turn on a VP cross-connect,
    the atmVpCrossConnectAdminStatus
    is set to `up'.

    Description by oid_info

    atmVpCrossConnectRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
    "The status of this entry in the
    atmVpCrossConnectTable. This object is used to
    create a cross-connect for cross-connecting
    VPLs which are created using the atmVplTable
    or to change or delete an existing cross-connect.
    This object must be initially set
    to `createAndWait or createAndGo.
    This object cannot be set to `active
    unless the following columnar object exists
    in this row: atmVpCrossConnectAdminStatus.
    To turn on a VP cross-connect,
    the atmVpCrossConnectAdminStatus
    is set to `up."
    DEFVAL { active }
    View at oid-info.com

    Description by mibdepot

    The status of this entry in the
    atmVpCrossConnectTable. This object is used to
    create a cross-connect for cross-connecting
    VPLs which are created using the atmVplTable
    or to change or delete an existing cross-connect.
    This object must be initially set
    to `createAndWait' or 'createAndGo'.
    This object cannot be set to `active'
    unless the following columnar object exists


    in this row: atmVpCrossConnectAdminStatus.
    To turn on a VP cross-connect,
    the atmVpCrossConnectAdminStatus
    is set to `up'.

    Parsed from file ATM-MIB.txt
    Company: None
    Module: ATM-MIB

    Description by cisco

    The status of this entry in the
    atmVpCrossConnectTable. This object is used to
    create a cross-connect for cross-connecting
    VPLs which are created using the atmVplTable
    or to change or delete an existing cross-connect.
    This object must be initially set
    to `createAndWait' or 'createAndGo'.
    To turn on a VP cross-connect,
    the atmVpCrossConnectAdminStatus
    is set to `up'.

    Information by circitor

    atmVpCrossConnectRowStatus OBJECT-TYPE
                    SYNTAX  RowStatus
                    MAX-ACCESS  read-create
                    STATUS  current
                    DESCRIPTION
                     "The status of this entry in the
                      atmVpCrossConnectTable.  This object is used to
                      create a cross-connect for cross-connecting
                      VPLs which are created using the atmVplTable
                      or to change or delete an existing cross-connect.
                      This object must be initially set
                      to `createAndWait' or 'createAndGo'.
                      This object cannot be set to `active'
                      unless the following columnar object exists
                      in this row: atmVpCrossConnectAdminStatus.
                      To turn on a VP cross-connect,
                      the atmVpCrossConnectAdminStatus
                      is set to `up'."
                    DEFVAL { active }
                    ::= { atmVpCrossConnectEntry 11 }

    Information by cisco_v1

    atmVpCrossConnectRowStatus OBJECT-TYPE
    SYNTAX RowStatus








    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "The status of this entry in the
         atmVpCrossConnectTable.  This object is used to
         create a cross-connect for cross-connecting
         VPLs which are created using the atmVplTable
         or to change or delete an existing cross-connect.
         This object must be initially set
         to `createAndWait' or 'createAndGo'.
         To turn on a VP cross-connect,
         the atmVpCrossConnectAdminStatus
         is set to `up'."
    DEFVAL { createAndWait }
    ::= { atmVpCrossConnectEntry 11 }

    Information by oid_info

    Automatically extracted from Cisco "SNMP v2 MIBs".

    Information by mibdepot

    atmVpCrossConnectRowStatus OBJECT-TYPE
    SYNTAX  RowStatus
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
           "The status of this entry in the
                      atmVpCrossConnectTable.  This object is used to
                      create a cross-connect for cross-connecting
                      VPLs which are created using the atmVplTable
                      or to change or delete an existing cross-connect.
                      This object must be initially set
                      to `createAndWait' or 'createAndGo'.
                      This object cannot be set to `active'
                      unless the following columnar object exists


                      in this row: atmVpCrossConnectAdminStatus.
                      To turn on a VP cross-connect,
                      the atmVpCrossConnectAdminStatus
                      is set to `up'."
    DEFVAL  { active }
    ::= { atmVpCrossConnectEntry  11 }

    Information by cisco

    atmVpCrossConnectRowStatus OBJECT-TYPE
          SYNTAX         RowStatus
          MAX-ACCESS     read-create
          STATUS         current
          DESCRIPTION
           "The status of this entry in the
            atmVpCrossConnectTable.  This object is used to
            create a cross-connect for cross-connecting
            VPLs which are created using the atmVplTable
            or to change or delete an existing cross-connect.
            This object must be initially set
            to `createAndWait' or 'createAndGo'.
            To turn on a VP cross-connect,
            the atmVpCrossConnectAdminStatus
            is set to `up'."
          DEFVAL { createAndWait }
          ::= { atmVpCrossConnectEntry 11 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Brothers (10)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.37.1.9.1.1 atmVpCrossConnectIndex 0 0 A unique value to identify this VP cross-connect.
    1.3.6.1.2.1.37.1.9.1.2 atmVpCrossConnectLowIfIndex 0 0 The ifIndex value of the ATM interface for
    this VP cross-connect. The term low implies
    that this ATM interface has the numericall…
    1.3.6.1.2.1.37.1.9.1.3 atmVpCrossConnectLowVpi 0 0 The VPI value at the ATM interface
    associated with the VP cross-connect that is
    identified by atmVpCrossConnectLowIfIndex.
    1.3.6.1.2.1.37.1.9.1.4 atmVpCrossConnectHighIfIndex 0 0 The ifIndex value of the ATM interface for
    this VP cross-connect. The term high implies that
    this ATM interface has the numerical…
    1.3.6.1.2.1.37.1.9.1.5 atmVpCrossConnectHighVpi 0 0 The VPI value at the ATM interface
    associated with the VP cross-connect that is
    identified by atmVpCrossConnectHighIfIndex.
    1.3.6.1.2.1.37.1.9.1.6 atmVpCrossConnectAdminStatus 0 0 The desired administrative status of this
    bi-directional VP cross-connect.
    1.3.6.1.2.1.37.1.9.1.7 atmVpCrossConnectL2HOperStatus 0 0 The operational status of the VP cross-connect
    in one direction; (i.e., from the low to
    high direction).
    1.3.6.1.2.1.37.1.9.1.8 atmVpCrossConnectH2LOperStatus 0 0 The operational status of the VP cross-connect
    in one direction; (i.e., from the high to
    low direction).
    1.3.6.1.2.1.37.1.9.1.9 atmVpCrossConnectL2HLastChange 0 0 The value of sysUpTime at the time this
    VP cross-connect entered its current operational
    state in the low to high direction.
    1.3.6.1.2.1.37.1.9.1.10 atmVpCrossConnectH2LLastChange 0 0 The value of sysUpTime at the time this
    VP cross-connect entered its current operational
    in the high to low direction.