atmMIBCompliance2 MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities
including networks which have ATM and
AAL5 interfaces."
MODULE -- this module
--
-- ****** Interface and Traffic Descriptor Support ***
--
MANDATORY-GROUPS {atmInterfaceConfGroup2,
atmTrafficDescrGroup2 }
OBJECT atmInterfaceMaxVpcs
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmInterfaceMaxVccs
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmInterfaceMaxActiveVpiBits
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
At the ATM UNI the maximum number of
active VPI bits configured for use ranges
from 0 to 8 only.
Implementations may support smaller ranges."
OBJECT atmInterfaceMaxActiveVciBits
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required.
Implementations may support smaller ranges."
OBJECT atmInterfaceIlmiVpi
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmInterfaceIlmiVci
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmInterfaceMyNeighborIpAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmInterfaceMyNeighborIfName
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmInterfaceSubscrAddress
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrParamIndexNext
DESCRIPTION
"This object is only required for systems
that support the creation of entries in
the atmTrafficDescrParamTable."
OBJECT atmTrafficDescrType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrParam1
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrParam2
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrParam3
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrParam4
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrParam5
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmServiceCategory
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmTrafficDescrRowStatus
SYNTAX INTEGER {active(1)}
-- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT atmTrafficFrameDiscard
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
--
-- ****** DS3 PLCP Support **************************
--
GROUP atmInterfaceDs3PlcpGroup
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement the
DS3 PLCP layer."
--
-- ****** TC Sublayer Support ********************************
--
GROUP atmInterfaceTCGroup
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement the
TC Sublayer."
--
-- ****** VPC Support *******************************
--
GROUP atmVpcTerminationGroup2
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement ATM
VPLs that terminate VPCs (i.e., ones which
are NOT cross-connected to other VPLs)."
GROUP atmVplCrossConnectGroup
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement ATM
VPLs that are not associated with VCLs
and are cross-connected to other VPLs
for VPCs."
GROUP atmVpPvcCrossConnectGroup
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement ATM
VPLs that are not associated with VCLs
and are cross-connected to other VPLs
for permanent VPCs (i.e., PVCs).
This group is not used to crossconnect
a PVC with an SVC to form a Soft PVC."
OBJECT atmVplAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVplReceiveTrafficDescrIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVplTransmitTrafficDescrIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVplRowStatus
SYNTAX INTEGER {active(1)}
-- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT atmVplCastType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVplConnKind
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVpCrossConnectAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVpCrossConnectRowStatus
SYNTAX INTEGER {active(1)}
-- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
--
-- ****** VCC Support *******************************
--
GROUP atmVccTerminationGroup2
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement ATM
VCLs that terminate VCCs (i.e., ones which
are NOT cross-connected to other VCLs)."
GROUP atmVclCrossConnectGroup
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement ATM
VCLs that are cross-connected to other VCLs
for VCCs."
GROUP atmVcPvcCrossConnectGroup
DESCRIPTION
"This group is mandatory only for those
ATM interfaces which implement ATM
VCLs that are cross-connected to other
VCLs for permanent VCCs (i.e., PVCs).
This group is not used to crossconnect
a PVC with an SVC to form a Soft PVC."
OBJECT atmVclAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVclReceiveTrafficDescrIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVclTransmitTrafficDescrIndex
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVccAalType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVclRowStatus
SYNTAX INTEGER {active(1)}
-- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
OBJECT atmVclCastType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVclConnKind
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVcCrossConnectAdminStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVcCrossConnectRowStatus
SYNTAX INTEGER { active(1)}
-- subset of RowStatus
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required, and only one
of the six enumerated values for the
RowStatus textual convention need be
supported, specifically: active(1)."
--
-- ****** AAL5 Support ******************************
--
GROUP aal5VccGroup
DESCRIPTION
"This group is mandatory for the
AAL5 virtual connections only."
OBJECT atmVccAal5CpcsTransmitSduSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVccAal5CpcsReceiveSduSize
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
OBJECT atmVccAal5EncapsType
MIN-ACCESS read-only
DESCRIPTION
"Write access is not required."
View at oid-info.com
The compliance statement for SNMP entities
including networks which have ATM and
AAL5 interfaces.
Parsed from file ATM-MIB.txt
Company: None
Module: ATM-MIB
The compliance statement for SNMP entities
including networks which have ATM and
AAL5 interfaces.
atmMIBCompliance2 OBJECT IDENTIFIER ::= { atmMIBCompliances 2 }
Automatically extracted from Management Information Bases (MIBs) provided with the OIDView tool from ByteSphere Technologies
atmMIBCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities including networks which have ATM and AAL5 interfaces." MODULE MANDATORY-GROUPS {atmInterfaceConfGroup2, atmTrafficDescrGroup2 } OBJECT atmInterfaceMaxVpcs MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMaxVccs MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMaxActiveVpiBits MIN-ACCESS read-only DESCRIPTION "Write access is not required. At the ATM UNI the maximum number of active VPI bits configured for use ranges from 0 to 8 only. Implementations may support smaller ranges." OBJECT atmInterfaceMaxActiveVciBits MIN-ACCESS read-only DESCRIPTION "Write access is not required. Implementations may support smaller ranges." OBJECT atmInterfaceIlmiVpi MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceIlmiVci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMyNeighborIpAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMyNeighborIfName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceSubscrAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParamIndexNext DESCRIPTION "This object is only required for systems that support the creation of entries in the atmTrafficDescrParamTable." OBJECT atmTrafficDescrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam1 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam2 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam3 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam4 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam5 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmServiceCategory MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT atmTrafficFrameDiscard MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP atmInterfaceDs3PlcpGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement the DS3 PLCP layer." GROUP atmInterfaceTCGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement the TC Sublayer." GROUP atmVpcTerminationGroup2 DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VPLs that terminate VPCs (i.e., ones which are NOT cross-connected to other VPLs)." GROUP atmVplCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs for VPCs." GROUP atmVpPvcCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs for permanent VPCs (i.e., PVCs). This group is not used to crossconnect a PVC with an SVC to form a Soft PVC." OBJECT atmVplAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplReceiveTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplTransmitTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT atmVplCastType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplConnKind MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVpCrossConnectAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVpCrossConnectRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." GROUP atmVccTerminationGroup2 DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VCLs that terminate VCCs (i.e., ones which are NOT cross-connected to other VCLs)." GROUP atmVclCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs for VCCs." GROUP atmVcPvcCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs for permanent VCCs (i.e., PVCs). This group is not used to crossconnect a PVC with an SVC to form a Soft PVC." OBJECT atmVclAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclReceiveTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclTransmitTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVccAalType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT atmVclCastType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclConnKind MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVcCrossConnectAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVcCrossConnectRowStatus SYNTAX INTEGER { active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." GROUP aal5VccGroup DESCRIPTION "This group is mandatory for the AAL5 virtual connections only." OBJECT atmVccAal5CpcsTransmitSduSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVccAal5CpcsReceiveSduSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVccAal5EncapsType MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { atmMIBCompliances 2 }
atmMIBCompliance2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities including networks which have ATM and AAL5 interfaces." MODULE MANDATORY-GROUPS {atmInterfaceConfGroup2, atmTrafficDescrGroup2 } OBJECT atmInterfaceMaxVpcs MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMaxVccs MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMaxActiveVpiBits MIN-ACCESS read-only DESCRIPTION "Write access is not required. At the ATM UNI the maximum number of active VPI bits configured for use ranges from 0 to 8 only. Implementations may support smaller ranges." OBJECT atmInterfaceMaxActiveVciBits MIN-ACCESS read-only DESCRIPTION "Write access is not required. Implementations may support smaller ranges." OBJECT atmInterfaceIlmiVpi MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceIlmiVci MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMyNeighborIpAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceMyNeighborIfName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmInterfaceSubscrAddress MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParamIndexNext DESCRIPTION "This object is only required for systems that support the creation of entries in the atmTrafficDescrParamTable." OBJECT atmTrafficDescrType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam1 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam2 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam3 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam4 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrParam5 MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmServiceCategory MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmTrafficDescrRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT atmTrafficFrameDiscard MIN-ACCESS read-only DESCRIPTION "Write access is not required." GROUP atmInterfaceDs3PlcpGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement the DS3 PLCP layer." GROUP atmInterfaceTCGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement the TC Sublayer." GROUP atmVpcTerminationGroup2 DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VPLs that terminate VPCs (i.e., ones which are NOT cross-connected to other VPLs)." GROUP atmVplCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs for VPCs." GROUP atmVpPvcCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VPLs that are not associated with VCLs and are cross-connected to other VPLs for permanent VPCs (i.e., PVCs). This group is not used to crossconnect a PVC with an SVC to form a Soft PVC." OBJECT atmVplAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplReceiveTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplTransmitTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT atmVplCastType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVplConnKind MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVpCrossConnectAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVpCrossConnectRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." GROUP atmVccTerminationGroup2 DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VCLs that terminate VCCs (i.e., ones which are NOT cross-connected to other VCLs)." GROUP atmVclCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs for VCCs." GROUP atmVcPvcCrossConnectGroup DESCRIPTION "This group is mandatory only for those ATM interfaces which implement ATM VCLs that are cross-connected to other VCLs for permanent VCCs (i.e., PVCs). This group is not used to crossconnect a PVC with an SVC to form a Soft PVC." OBJECT atmVclAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclReceiveTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclTransmitTrafficDescrIndex MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVccAalType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclRowStatus SYNTAX INTEGER {active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." OBJECT atmVclCastType MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVclConnKind MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVcCrossConnectAdminStatus MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVcCrossConnectRowStatus SYNTAX INTEGER { active(1)} MIN-ACCESS read-only DESCRIPTION "Write access is not required, and only one of the six enumerated values for the RowStatus textual convention need be supported, specifically: active(1)." GROUP aal5VccGroup DESCRIPTION "This group is mandatory for the AAL5 virtual connections only." OBJECT atmVccAal5CpcsTransmitSduSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVccAal5CpcsReceiveSduSize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT atmVccAal5EncapsType MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { atmMIBCompliances 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.37.2.2.1 | atmMIBCompliance | 0 | 0 | The compliance statement for SNMP entities including networks which have ATM and AAL5 interfaces. |