This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred.
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds.
A value of zero indicates no timeout.
Parsed from file SNA-SDLC-MIB.mib
Module: SNA-SDLC-MIB
This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred.
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds.
A value of zero indicates no timeout.
sdlcPortOperACTIVTO OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred.
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds.
A value of zero indicates no timeout."
View at oid-info.com
This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred.
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds.
A value of zero indicates no timeout.
Parsed from file rfc1747-SNA-Data-Link-Control-SDLC.mib.txt
Company: None
Module: SNA-SDLC-MIB
This parameter defines the period of time (in
100ths of a second) that the port will allow a
switched line to remain inactive before
disconnecting. A switched line is considered
to be inactive if there are no I-Frames being
transferred.
The object descriptor contains the name of an
NCP configuration parameter, ACTIVTO. Please
note that the value of this object represents
1/100ths of a second while the NCP ACTIVTO is
represented in seconds.
A value of zero indicates no timeout.
sdlcPortOperACTIVTO OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines the period of time (in 100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds. A value of zero indicates no timeout." ::= { sdlcPortOperEntry 6 }
sdlcPortOperACTIVTO OBJECT-TYPE SYNTAX TimeInterval ACCESS read-only STATUS mandatory DESCRIPTION "This parameter defines the period of time (in 100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds. A value of zero indicates no timeout." ::= { sdlcPortOperEntry 6 }
Automatically extracted from Cisco "SNMP v2 MIBs".
sdlcPortOperACTIVTO OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines the period of time (in 100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds. A value of zero indicates no timeout." ::= { sdlcPortOperEntry 6 }
sdlcPortOperACTIVTO OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter defines the period of time (in 100ths of a second) that the port will allow a switched line to remain inactive before disconnecting. A switched line is considered to be inactive if there are no I-Frames being transferred. The object descriptor contains the name of an NCP configuration parameter, ACTIVTO. Please note that the value of this object represents 1/100ths of a second while the NCP ACTIVTO is represented in seconds. A value of zero indicates no timeout." ::= { sdlcPortOperEntry 6 }
IETF SNA DLC MIB Working Group
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.41.1.1.2.1.1 | sdlcPortOperName | 0 | 0 | An octet string that describes the physical port to which this interface is currently attached. It has implementation-specific s… |
| 1.3.6.1.2.1.41.1.1.2.1.2 | sdlcPortOperRole | 0 | 0 | This object describes the role that the link station has assumed on this connection. Even though this is defined as a port object… |
| 1.3.6.1.2.1.41.1.1.2.1.3 | sdlcPortOperType | 0 | 0 | This parameter defines whether the SDLC port is currently operating as though connected to a leased or switched line. |
| 1.3.6.1.2.1.41.1.1.2.1.4 | sdlcPortOperTopology | 0 | 0 | This parameter defines whether the SDLC port is currently operating in a point-to-point or multipoint topology. |
| 1.3.6.1.2.1.41.1.1.2.1.5 | sdlcPortOperISTATUS | 0 | 0 | This parameter describes the initial value of the administrative status, ifAdminStatus, of this SDLC port at last port start-up. |
| 1.3.6.1.2.1.41.1.1.2.1.7 | sdlcPortOperPAUSE | 0 | 0 | This object describes the current minimum elapsed time (in 1/100ths of a second) between any two traversals of the poll list for … |
| 1.3.6.1.2.1.41.1.1.2.1.8 | sdlcPortOperSlowPollMethod | 0 | 0 | This object defines the exact method that is in effect for periodically polling failed secondary link station addresses. If sdlcPo… |
| 1.3.6.1.2.1.41.1.1.2.1.9 | sdlcPortOperSERVLIM | 0 | 0 | This object describes the number of times the active poll list is currently being traversed before polling a station on the slow … |
| 1.3.6.1.2.1.41.1.1.2.1.10 | sdlcPortOperSlowPollTimer | 0 | 0 | This object describes the elapsed time (in 1/100ths of a second) between polls for failed secondary link station addresses. This o… |
| 1.3.6.1.2.1.41.1.1.2.1.11 | sdlcPortOperLastModifyTime | 0 | 0 | This object describes the value of sysUpTime when this port definition was last modified. If the port has not been modified, then… |
| 1.3.6.1.2.1.41.1.1.2.1.12 | sdlcPortOperLastFailTime | 0 | 0 | This object describes the value of sysUpTime when this SDLC port last failed. If the port has not failed, then this value shall … |
| 1.3.6.1.2.1.41.1.1.2.1.13 | sdlcPortOperLastFailCause | 0 | 0 | This enumerated object describes the cause of the last failure of this SDLC port. If the port has not failed, then this object h… |