This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port.
Parsed from file SNA-SDLC-MIB.mib
Module: SNA-SDLC-MIB
This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port.
sdlcLSAddress OBJECT-TYPE
SYNTAX INTEGER (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port."
View at oid-info.com
This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port.
Parsed from file rfc1747-SNA-Data-Link-Control-SDLC.mib.txt
Company: None
Module: SNA-SDLC-MIB
This value is the poll address of the
secondary link station for this SDLC link. It
uniquely identifies the SDLC link station
within a single SDLC port.
sdlcLSAddress OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port." ::= { sdlcLSAdminEntry 1 }
sdlcLSAddress OBJECT-TYPE SYNTAX INTEGER(1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port." ::= { sdlcLSAdminEntry 1 }
Automatically extracted from Cisco "SNMP v2 MIBs".
sdlcLSAddress OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port." ::= { sdlcLSAdminEntry 1 }
sdlcLSAddress OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port." ::= { sdlcLSAdminEntry 1 }
IETF SNA DLC MIB Working Group
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.41.1.2.1.1.1.0 | sdlcLSAddress | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.41.1.2.1.1.2 | sdlcLSAdminName | 0 | 0 | An octet string that defines the local name of the SDLC link station. This field may be sent in the XID3 control vector 0x0E, ty… |
| 1.3.6.1.2.1.41.1.2.1.1.3 | sdlcLSAdminState | 0 | 0 | This object controls the desired state of the SDLC station. The managed system shall attempt to keep the operational state, sdlc… |
| 1.3.6.1.2.1.41.1.2.1.1.4 | sdlcLSAdminISTATUS | 0 | 0 | This parameter controls the desired state, sdlcLSAdminState, of the SDLC link station at link station start-up. |
| 1.3.6.1.2.1.41.1.2.1.1.5 | sdlcLSAdminMAXDATASend | 0 | 0 | This object contains the maximum PDU size that the local link station thinks it can send to the adjacent link station before havi… |
| 1.3.6.1.2.1.41.1.2.1.1.6 | sdlcLSAdminMAXDATARcv | 0 | 0 | This object contains the maximum PDU size that the local link station can receive from the adjacent link station. This value is … |
| 1.3.6.1.2.1.41.1.2.1.1.7 | sdlcLSAdminREPLYTO | 0 | 0 | This object controls the reply timeout (in 1/100ths of a second) for an SDLC link station. If the link station does not receive a… |
| 1.3.6.1.2.1.41.1.2.1.1.8 | sdlcLSAdminMAXIN | 0 | 0 | This object controls the maximum number of unacknowledged I-frames which an SDLC link station may receive. This should range fro… |
| 1.3.6.1.2.1.41.1.2.1.1.9 | sdlcLSAdminMAXOUT | 0 | 0 | This object controls the maximum number of consecutive unacknowledged I-frames which an SDLC link station shall send without an ac… |
| 1.3.6.1.2.1.41.1.2.1.1.10 | sdlcLSAdminMODULO | 0 | 0 | This object controls the modulus for an SDLC link station. This modulus determines the size of the rotating acknowledgement wind… |
| 1.3.6.1.2.1.41.1.2.1.1.11 | sdlcLSAdminRETRIESm | 0 | 0 | This object controls number of retries in a retry sequence for the local SDLC link station. A retry sequence is a series of retra… |
| 1.3.6.1.2.1.41.1.2.1.1.12 | sdlcLSAdminRETRIESt | 0 | 0 | This object controls the interval (in 1/100ths of a second) between retry sequences for the local SDLC link station if multiple r… |
| 1.3.6.1.2.1.41.1.2.1.1.13 | sdlcLSAdminRETRIESn | 0 | 0 | This object controls the number of times that a retry sequence is repeated for the local SDLC link station. A retry sequence is … |
| 1.3.6.1.2.1.41.1.2.1.1.14 | sdlcLSAdminRNRLIMIT | 0 | 0 | This object controls the length of time (in 1/100ths of a second) that an SDLC link station will allow its adjacent link station … |
| 1.3.6.1.2.1.41.1.2.1.1.15 | sdlcLSAdminDATMODE | 0 | 0 | This object controls whether communications mode with the adjacent link station is two-way-alternate (half) or two-way-simultaneo… |
| 1.3.6.1.2.1.41.1.2.1.1.16 | sdlcLSAdminGPoll | 0 | 0 | This object describes the group poll address for this link station instance. If group poll is not in effect for this link statio… |
| 1.3.6.1.2.1.41.1.2.1.1.17 | sdlcLSAdminSimRim | 0 | 0 | This object controls the support for transmission and receipt of SIM and RIM control frames for this link station. The value of t… |
| 1.3.6.1.2.1.41.1.2.1.1.18 | sdlcLSAdminXmitRcvCap | 0 | 0 | This object controls the transmit-receive capabilities for this SDLC link station. The value of this object establishes the valu… |
| 1.3.6.1.2.1.41.1.2.1.1.19 | sdlcLSAdminRowStatus | 0 | 0 | This object is used by a management station to create or delete the row entry in sdlcLSAdminTable following the RowStatus textual … |