The printer will act as if media of the chosen
dimension (in the cross feed direction) is present in
this input source. Note that this value will be used
even if the input tray is empty. The cross feed
direction is ninety degrees relative to the feed
direction associated with this sub-unit. This dimension
is measured in input sub-unit dimensional units
(MediaUnit). If the printer supports the declare
dimension, the granted dimension is the same as the
declared dimension. If not, the granted dimension is set
to the closest dimension that the printer supports when
the declared dimension is set. The value (-1) means
other and specifically indicates that this sub-unit
places no restriction on this parameter. The value (-2)
indicates unknown.
Parsed from file Printer-MIB.mib
Module: Printer-MIB
The printer will act as if media of the chosen dimension (in
the cross feed direction) is present in this input source. Note
that this value will be used even if the input tray is empty.
The cross feed direction is ninety degrees relative to the feed
direction associated with this sub-unit. This dimension is
measured in input sub-unit dimensional units (controlled by
prtInputDimUnit, which uses PrtMediaUnitTC). If the printer
supports the declare dimension, the granted dimension is the
same as the declared dimension. If not, the granted dimension
is set to the closest dimension that the printer supports when
the declared dimension is set. The value (-1) means other and
specifically indicates that this sub-unit places no restriction
on this parameter. The value (-2) indicates unknown.
prtInputMediaDimXFeedDirChosen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The printer will act as if media of the chosen dimension (in
the cross feed direction) is present in this input source.
Note that this value will be used even if the input tray is
empty. The cross feed direction is ninety degrees relative
to the feed direction associated with this sub-unit. This
dimension is measured in input sub-unit dimensional units
(DimUnit). If the printer supports the declared
dimension, the granted dimension is the same as the
declared dimension. If not, the granted dimension is set
to the closest dimension that the printer supports when
the declared dimension is set. The value (-1) means other
and specifically indicates that this sub-unit places no
restriction on this parameter. The value (-2) indicates
unknown."
View at oid-info.com
The printer will act as if media of the chosen dimension (in
the cross feed direction) is present in this input source.
Note that this value will be used even if the input tray is
empty. The cross feed direction is ninety degrees relative
to the feed direction associated with this sub-unit. This
dimension is measured in input sub-unit dimensional units
(DimUnit). If the printer supports the declared
dimension, the granted dimension is the same as the
declared dimension. If not, the granted dimension is set
to the closest dimension that the printer supports when
the declared dimension is set. The value (-1) means other
and specifically indicates that this sub-unit places no
restriction on this parameter. The value (-2) indicates
unknown.
Parsed from file rfc1759.mib.txt
Company: None
Module: Printer-MIB
The printer will act as if media of the chosen dimension (in
the cross feed direction) is present in this input source. Note
that this value will be used even if the input tray is empty.
The cross feed direction is ninety degrees relative to the feed
direction associated with this sub-unit. This dimension is
measured in input sub-unit dimensional units (controlled by
prtInputDimUnit, which uses PrtMediaUnitTC). If the printer
supports the declare dimension, the granted dimension is the
same as the declared dimension. If not, the granted dimension
is set to the closest dimension that the printer supports when
the declared dimension is set. The value (-1) means other and
specifically indicates that this sub-unit places no restriction
on this parameter. The value (-2) indicates unknown.
prtInputMediaDimXFeedDirChosen OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (MediaUnit). If the printer supports the declare dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown." ::= { prtInputEntry 7 }
prtInputMediaDimXFeedDirChosen OBJECT-TYPE SYNTAX INTEGER(-2..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (controlled by prtInputDimUnit, which uses PrtMediaUnitTC). If the printer supports the declare dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown." ::= { prtInputEntry 7 }
Automatically extracted from RFC1759
prtInputMediaDimXFeedDirChosen OBJECT-TYPE SYNTAX INTEGER (-2147483648..2147483647) ACCESS read-only STATUS mandatory DESCRIPTION "The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (DimUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown." ::= { prtInputEntry 7 }
prtInputMediaDimXFeedDirChosen OBJECT-TYPE SYNTAX Integer32 (-2..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed direction associated with this sub-unit. This dimension is measured in input sub-unit dimensional units (controlled by prtInputDimUnit, which uses PrtMediaUnitTC). If the printer supports the declare dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown." ::= { prtInputEntry 7 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.43.8.2.1.1 | prtInputIndex | 0 | 0 | A unique value used by the printer to identify this input sub-unit. Although these values may change due to a major reconfigurati… |
| 1.3.6.1.2.1.43.8.2.1.2 | prtInputType | 0 | 0 | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the In… |
| 1.3.6.1.2.1.43.8.2.1.3 | prtInputDimUnit | 0 | 0 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.4 | prtInputMediaDimFeedDirDeclared | 0 | 0 | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will … |
| 1.3.6.1.2.1.43.8.2.1.5 | prtInputMediaDimXFeedDirDeclared | 0 | 0 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
| 1.3.6.1.2.1.43.8.2.1.6 | prtInputMediaDimFeedDirChosen | 0 | 0 | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this… |
| 1.3.6.1.2.1.43.8.2.1.8 | prtInputCapacityUnit | 0 | 0 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.9 | prtInputMaxCapacity | 0 | 0 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
| 1.3.6.1.2.1.43.8.2.1.10 | prtInputCurrentLevel | 0 | 0 | The current capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). If this input sub-unit can reliably s… |
| 1.3.6.1.2.1.43.8.2.1.11 | prtInputStatus | 0 | 0 | The current status of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.12 | prtInputMediaName | 0 | 0 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
| 1.3.6.1.2.1.43.8.2.1.13 | prtInputName | 0 | 0 | The name assigned to this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.14 | prtInputVendorName | 0 | 0 | The vendor name of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.15 | prtInputModel | 0 | 0 | The model name of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.16 | prtInputVersion | 0 | 0 | The version of this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.17 | prtInputSerialNumber | 0 | 0 | The serial number assigned to this input sub-unit. |
| 1.3.6.1.2.1.43.8.2.1.18 | prtInputDescription | 0 | 0 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.2.1.43.8.2.1.19 | prtInputSecurity | 0 | 0 | Indicates if this input sub-unit has some security associated with it. |
| 1.3.6.1.2.1.43.8.2.1.20 | prtInputMediaWeight | 0 | 0 | The weight of the medium associated with this input sub-unit in grams / per meter squared. The value (-2) means unknown. |
| 1.3.6.1.2.1.43.8.2.1.21 | prtInputMediaType | 0 | 0 | The name of the type of medium associated with this input sub unit. This name need not be processed by the printer; it might sim… |
| 1.3.6.1.2.1.43.8.2.1.22 | prtInputMediaColor | 0 | 0 | The name of the color of the medium associated with this input sub-unit using standardized string values. NOTE: The above descrip… |
| 1.3.6.1.2.1.43.8.2.1.23 | prtInputMediaFormParts | 0 | 0 | The number of parts associated with the medium associated with this input sub-unit if the medium is a multi-part form. The value… |
| 1.3.6.1.2.1.43.8.2.1.24 | prtInputMediaLoadTimeout | 0 | 0 | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer wi… |
| 1.3.6.1.2.1.43.8.2.1.25 | prtInputNextIndex | 0 | 0 | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the time-… |
| 1.3.6.1.2.1.43.8.2.1.26 | prtinputnextindex | 0 | 0 | prtinputnextindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The value of prtInputIndex correspon… |