An entry in the vrrpOperTable containing the operational
characteristics of a virtual router. On a VRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Rows in the table cannot be modified unless the value of `vrrpOperAdminState'
is `disabled' and the
`vrrpOperState' has transitioned to `initialize'.
Parsed from file vrrp.mib.txt
Company: ruijie
Module: VRRP-MIB
Vendor: 3Com
Module: VRRP-MIB (VRRP-MIB.mib)
Type: ENTRY
Access: not-accessible
Syntax: VrrpOperEntry
Automatically extracted from www.mibdepot.com
vrrpOperEntry OBJECT-TYPE SYNTAX VrrpOperEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'." INDEX { ifIndex, vrrpOperVrId } ::= { vrrpOperTable 1 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.46.1.1.3.1.1 | vrrpOperVrId, vrrpOperIfIndex | 0 | 0 | This object contains the Virtual Router Identifier (VRID). |
| 1.3.6.1.2.1.46.1.1.3.1.2 | vrrpOperVirtualMacAddr | 0 | 0 | The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined … |
| 1.3.6.1.2.1.46.1.1.3.1.3 | vrrpOperState, vrrpOperIpAddr | 0 | 0 | The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtua… |
| 1.3.6.1.2.1.46.1.1.3.1.4 | vrrpOperAdminState | 0 | 0 | This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual … |
| 1.3.6.1.2.1.46.1.1.3.1.5 | vrrpOperPriority | 0 | 0 | This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority… |
| 1.3.6.1.2.1.46.1.1.3.1.6 | vrrpOperIpAddrCount, vrrpOperControl | 0 | 0 | The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAs… |
| 1.3.6.1.2.1.46.1.1.3.1.7 | vrrpOperMasterIpAddr | 0 | 0 | The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by… |
| 1.3.6.1.2.1.46.1.1.3.1.8 | vrrpOperPrimaryIpAddr | 0 | 0 | In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that wil… |
| 1.3.6.1.2.1.46.1.1.3.1.9 | vrrpOperAuthType | 0 | 0 | vrrpOperAuthtype |
| 1.3.6.1.2.1.46.1.1.3.1.10 | vrrpOperAuthKey | 0 | 0 | The Authentication Key. This object is set according to the value of the 'vrrpOperAuthType' object ('simpleTextPassword' or 'ipAu… |
| 1.3.6.1.2.1.46.1.1.3.1.11 | vrrpOperAdvertisementInterval | 0 | 0 | The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. |
| 1.3.6.1.2.1.46.1.1.3.1.12 | vrrpOperPreemptMode, vrrpOperHMACMD5Key | 0 | 0 | Controls whether a higher priority virtual router will preempt a lower priority master. |
| 1.3.6.1.2.1.46.1.1.3.1.13 | vrrpOperVirtualRouterUpTime | 0 | 0 | This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized… |
| 1.3.6.1.2.1.46.1.1.3.1.14 | vrrpOperProtocol | 0 | 0 | The particular protocol being controlled by this Virtual Router. New enumerations to this list can only be added via a new RFC on… |
| 1.3.6.1.2.1.46.1.1.3.1.15 | vrrpOperRowStatus | 0 | 0 | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a curre… |
| 1.3.6.1.2.1.46.1.1.3.1.17 | vrrpOperCriticalIpAddr | 0 | 0 | IP address of the interface that will cause a shutdown event. |
| 1.3.6.1.2.1.46.1.1.3.1.18 | vrrpOperHoldDownTimer | 0 | 0 | Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master. |
| 1.3.6.1.2.1.46.1.1.3.1.19 | vrrpOperHoldDownState | 0 | 0 | Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to … |
| 1.3.6.1.2.1.46.1.1.3.1.20 | vrrpOperHoldDownTimeRemaining | 0 | 0 | Used to indicate the amount of time (in seconds) left before the vrrpOperHoldDownTimer will expire. |
| 1.3.6.1.2.1.46.1.1.3.1.21 | vrrpOperAction | 0 | 0 | Used to trigger an action on this vrrp interface. |
| 1.3.6.1.2.1.46.1.1.3.1.22 | vrrpOperCriticalIpAddrEnable | 0 | 0 | Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (0.0.0.0). No effect if an u… |
| 1.3.6.1.2.1.46.1.1.3.1.23 | vrrpOperBackUpMaster | 0 | 0 | None |
| 1.3.6.1.2.1.46.1.1.3.1.24 | vrrpOperBackUpMasterState | 0 | 0 | None |
| 1.3.6.1.2.1.46.1.1.3.1.25 | vrrpOperFasterAdvInterval | 0 | 0 | This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement… |
| 1.3.6.1.2.1.46.1.1.3.1.26 | vrrpOperFasterAdvIntervalEnable | 0 | 0 | Used to indicate if the Faster Advertisement Interval should be used. 'Disable' means use regular Advertisement interval. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.46.1.1.3.0 | vrrpTrapCntl | 0 | 0 | None |