The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by rsvpSen-
derProtocol, is 50 (ESP) or 51 (AH), this
represents a virtual destination port number.
A value of zero indicates that the IP protocol
in use does not have ports. This object may
not be changed when the value of the RowStatus
object is 'active'.
Parsed from file RSVP-MIB.mib
Module: RSVP-MIB
The UDP or TCP port number used as a
destination port for all senders in this
session. If the IP protocol in use, specified
by rsvpSenderProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This
object may not be changed when the value of the
RowStatus object is 'active'.
rsvpSenderDestPort OBJECT-TYPE
SYNTAX Port
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The UDP or TCP port number used as a
destination port for all senders in this
session. If the IP protocol in use, specified
by rsvpSenderProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This
object may not be changed when the value of the
RowStatus object is active."
View at oid-info.com
The UDP or TCP port number used as a destina-
tion port for all senders in this session. If
the IP protocol in use, specified by rsvpSen-
derProtocol, is 50 (ESP) or 51 (AH), this
represents a virtual destination port number.
A value of zero indicates that the IP protocol
in use does not have ports. This object may
not be changed when the value of the RowStatus
object is 'active'.
Parsed from file INT_2206.MIB.txt
Company: None
Module: RSVP-MIB
The UDP or TCP port number used as a
destination port for all senders in this
session. If the IP protocol in use, specified
by rsvpSenderProtocol, is 50 (ESP) or 51 (AH),
this represents a virtual destination port
number. A value of zero indicates that the IP
protocol in use does not have ports. This
object may not be changed when the value of the
RowStatus object is 'active'.
rsvpSenderDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 8 }
rsvpSenderDestPort OBJECT-TYPE SYNTAX Port ACCESS read-write STATUS mandatory DESCRIPTION "The UDP or TCP port number used as a destination port for all senders in this session. If the IP protocol in use, specified by rsvpSenderProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 8 }
Automatically extracted from Cisco "SNMP v2 MIBs".
rsvpSenderDestPort OBJECT-TYPE SYNTAX Port ACCESS read-write STATUS mandatory DESCRIPTION "The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, specified by rsvpSen- derProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 8 }
rsvpSenderDestPort OBJECT-TYPE SYNTAX Port MAX-ACCESS read-create STATUS current DESCRIPTION "The UDP or TCP port number used as a destination port for all senders in this session. If the IP protocol in use, specified by rsvpSenderProtocol, is 50 (ESP) or 51 (AH), this represents a virtual destination port number. A value of zero indicates that the IP protocol in use does not have ports. This object may not be changed when the value of the RowStatus object is 'active'." ::= { rsvpSenderEntry 8 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.51.1.2.1.1 | rsvpSenderNumber, rsvpSenderSessionIndex | 0 | 0 | The number of this sender. This is for SNMP Indexing purposes only and has no relation to any protocol value. |
1.3.6.1.2.1.51.1.2.1.2 | rsvpSenderType | 0 | 0 | The type of session (IP4, IP6, IP6 with flow information, etc). |
1.3.6.1.2.1.51.1.2.1.3 | rsvpSenderDestAddr | 0 | 0 | The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus ob… |
1.3.6.1.2.1.51.1.2.1.4 | rsvpSenderAddr | 0 | 0 | The source address used by this sender in this session. This object may not be changed when the value of the RowStatus object … |
1.3.6.1.2.1.51.1.2.1.5 | rsvpSenderDestAddrLength | 0 | 0 | The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 3… |
1.3.6.1.2.1.51.1.2.1.6 | rsvpSenderAddrLength | 0 | 0 | The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 32… |
1.3.6.1.2.1.51.1.2.1.7 | rsvpSenderProtocol | 0 | 0 | The IP Protocol used by this session. This object may not be changed when the value of the RowStatus object is 'active'. |
1.3.6.1.2.1.51.1.2.1.9 | rsvpSenderPort | 0 | 0 | The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, specified by r… |
1.3.6.1.2.1.51.1.2.1.10 | rsvpSenderFlowId | 0 | 0 | The flow ID that this sender is using, if this is an IPv6 session. |
1.3.6.1.2.1.51.1.2.1.11 | rsvpSenderHopAddr | 0 | 0 | The address used by the previous RSVP hop (which may be the original sender). |
1.3.6.1.2.1.51.1.2.1.12 | rsvpSenderHopLih | 0 | 0 | The Logical Interface Handle used by the previous RSVP hop (which may be the original sender). |
1.3.6.1.2.1.51.1.2.1.13 | rsvpSenderInterface | 0 | 0 | The ifIndex value of the interface on which this PATH message was most recently received. |
1.3.6.1.2.1.51.1.2.1.14 | rsvpSenderTSpecRate | 0 | 0 | The Average Bit Rate of the sender's data stream. Within a transmission burst, the ar- rival rate may be as fast as rsv… |
1.3.6.1.2.1.51.1.2.1.15 | rsvpSenderTSpecPeakRate | 0 | 0 | The Peak Bit Rate of the sender's data stream. Traffic arrival is not expected to exceed this rate at any time, apart from the… |
1.3.6.1.2.1.51.1.2.1.16 | rsvpSenderTSpecBurst | 0 | 0 | The size of the largest burst expected from the sender at a time. |
1.3.6.1.2.1.51.1.2.1.17 | rsvpSenderTSpecMinTU | 0 | 0 | The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size. |
1.3.6.1.2.1.51.1.2.1.18 | rsvpSenderTSpecMaxTU | 0 | 0 | The maximum message size for this flow. The admission algorithm will reject TSpecs whose Maximum Transmission Unit, plus th… |
1.3.6.1.2.1.51.1.2.1.19 | rsvpSenderInterval | 0 | 0 | The interval between refresh messages as advertised by the Previous Hop. |
1.3.6.1.2.1.51.1.2.1.20 | rsvpSenderRSVPHop | 0 | 0 | If TRUE, the node believes that the previous IP hop is an RSVP hop. If FALSE, the node believes that the previous IP hop ma… |
1.3.6.1.2.1.51.1.2.1.21 | rsvpSenderLastChange | 0 | 0 | The time of the last change in this PATH mes- sage; This is either the first time it was re- ceived or the time of the most rec… |
1.3.6.1.2.1.51.1.2.1.22 | rsvpSenderPolicy | 0 | 0 | The contents of the policy object, displayed as an uninterpreted string of octets, including the object header. In the absence … |
1.3.6.1.2.1.51.1.2.1.23 | rsvpSenderAdspecBreak | 0 | 0 | The global break bit general characterization parameter from the ADSPEC. If TRUE, at least one non-IS hop was detected in th… |
1.3.6.1.2.1.51.1.2.1.24 | rsvpSenderAdspecHopCount | 0 | 0 | The hop count general characterization parameter from the ADSPEC. A return of zero or noSuchValue indicates one of the fo… |
1.3.6.1.2.1.51.1.2.1.25 | rsvpSenderAdspecPathBw | 0 | 0 | The path bandwidth estimate general character- ization parameter from the ADSPEC. A return of zero or noSuchValue indicates one … |
1.3.6.1.2.1.51.1.2.1.26 | rsvpSenderAdspecMinLatency | 0 | 0 | The minimum path latency general characteriza- tion parameter from the ADSPEC. A return of zero or noSuchValue indicates one … |
1.3.6.1.2.1.51.1.2.1.27 | rsvpSenderAdspecMtu | 0 | 0 | The composed Maximum Transmission Unit general characterization parameter from the ADSPEC. A return of zero or noSuchValue indi… |
1.3.6.1.2.1.51.1.2.1.28 | rsvpSenderAdspecGuaranteedSvc | 0 | 0 | If TRUE, the ADSPEC contains a Guaranteed Ser- vice fragment. If FALSE, the ADSPEC does not contain a Guaranteed Service fragm… |
1.3.6.1.2.1.51.1.2.1.29 | rsvpSenderAdspecGuaranteedBreak | 0 | 0 | If TRUE, the Guaranteed Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not … |
1.3.6.1.2.1.51.1.2.1.30 | rsvpSenderAdspecGuaranteedCtot | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'C' parameter. … |
1.3.6.1.2.1.51.1.2.1.31 | rsvpSenderAdspecGuaranteedDtot | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the end-to-end composed value for the guaranteed service 'D' parameter. … |
1.3.6.1.2.1.51.1.2.1.32 | rsvpSenderAdspecGuaranteedCsum | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed service 'C' parameter since the last … |
1.3.6.1.2.1.51.1.2.1.33 | rsvpSenderAdspecGuaranteedDsum | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the composed value for the guaranteed ser- vice 'D' parameter since the la… |
1.3.6.1.2.1.51.1.2.1.34 | rsvpSenderAdspecGuaranteedHopCount | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the hop count general characterization par… |
1.3.6.1.2.1.51.1.2.1.35 | rsvpSenderAdspecGuaranteedPathBw | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the path bandwidth estimate general cha… |
1.3.6.1.2.1.51.1.2.1.36 | rsvpSenderAdspecGuaranteedMinLatency | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the minimum path latency general characterizat… |
1.3.6.1.2.1.51.1.2.1.37 | rsvpSenderAdspecGuaranteedMtu | 0 | 0 | If rsvpSenderAdspecGuaranteedSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit ge… |
1.3.6.1.2.1.51.1.2.1.38 | rsvpSenderAdspecCtrlLoadSvc | 0 | 0 | If TRUE, the ADSPEC contains a Controlled Load Service fragment. If FALSE, the ADSPEC does not contain a Controlled Load S… |
1.3.6.1.2.1.51.1.2.1.39 | rsvpSenderAdspecCtrlLoadBreak | 0 | 0 | If TRUE, the Controlled Load Service fragment has its 'break' bit set, indicating that one or more nodes along the path do not … |
1.3.6.1.2.1.51.1.2.1.40 | rsvpSenderAdspecCtrlLoadHopCount | 0 | 0 | If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the hop count general characterization par… |
1.3.6.1.2.1.51.1.2.1.41 | rsvpSenderAdspecCtrlLoadPathBw | 0 | 0 | If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the path bandwidth estimate general cha… |
1.3.6.1.2.1.51.1.2.1.42 | rsvpSenderAdspecCtrlLoadMinLatency | 0 | 0 | If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the minimum path latency general characterizat… |
1.3.6.1.2.1.51.1.2.1.43 | rsvpSenderAdspecCtrlLoadMtu | 0 | 0 | If rsvpSenderAdspecCtrlLoadSvc is TRUE, this is the service-specific override of the com- posed Maximum Transmission Unit ge… |
1.3.6.1.2.1.51.1.2.1.44 | rsvpSenderStatus | 0 | 0 | 'active' for all active PATH messages. This object may be used to install static PATH in- formation or delete PATH informati… |
1.3.6.1.2.1.51.1.2.1.45 | rsvpSenderTTL | 0 | 0 | The TTL value in the RSVP header that was last received. |