The type of session (IP4, IP6, IP6 with flow
information, etc).
Parsed from file INT-SERV-MIB.mib
Module: INT-SERV-MIB
The type of session (IP4, IP6, IP6 with flow
information, etc).
intSrvFlowType OBJECT-TYPE
SYNTAX SessionType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The type of session (IP4, IP6, IP6 with flow
information, etc)."
View at oid-info.com
The type of session (IP4, IP6, IP6 with flow
information, etc).
Parsed from file integrated-services.mib.txt
Company: None
Module: INTEGRATED-SERVICES-MIB
The type of session (IP4, IP6, IP6 with flow
information, etc).
intSrvFlowType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { intSrvFlowEntry 2 }
intSrvFlowType OBJECT-TYPE SYNTAX SessionType ACCESS read-write STATUS mandatory DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { intSrvFlowEntry 2 }
Automatically extracted from Cisco "SNMP v2 MIBs".
intSrvFlowType OBJECT-TYPE SYNTAX SessionType ACCESS read-write STATUS mandatory DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { intSrvFlowEntry 2 }
intSrvFlowType OBJECT-TYPE SYNTAX SessionType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of session (IP4, IP6, IP6 with flow information, etc)." ::= { intSrvFlowEntry 2 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.52.1.2.1.1 | intSrvFlowNumber | 0 | 0 | The number of this flow. This is for SNMP In- dexing purposes only and has no relation to any protocol value. |
| 1.3.6.1.2.1.52.1.2.1.3 | intSrvFlowOwner | 0 | 0 | The process that installed this flow in the queue policy database. |
| 1.3.6.1.2.1.52.1.2.1.4 | intSrvFlowDestAddr | 0 | 0 | The destination address used by all senders in this session. This object may not be changed when the value of the RowStatus ob… |
| 1.3.6.1.2.1.52.1.2.1.5 | intSrvFlowSenderAddr | 0 | 0 | The source address of the sender selected by this reservation. The value of all zeroes in- dicates 'all senders'. This objec… |
| 1.3.6.1.2.1.52.1.2.1.6 | intSrvFlowDestAddrLength | 0 | 0 | The length of the destination address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 3… |
| 1.3.6.1.2.1.52.1.2.1.7 | intSrvFlowSenderAddrLength | 0 | 0 | The length of the sender's address in bits. This is the CIDR Prefix Length, which for IP4 hosts and multicast addresses is 3… |
| 1.3.6.1.2.1.52.1.2.1.8 | intSrvFlowProtocol | 0 | 0 | The IP Protocol used by a session. This ob- ject may not be changed when the value of the RowStatus object is 'active'. |
| 1.3.6.1.2.1.52.1.2.1.9 | intSrvFlowDestPort | 0 | 0 | The UDP or TCP port number used as a destina- tion port for all senders in this session. If the IP protocol in use, s… |
| 1.3.6.1.2.1.52.1.2.1.10 | intSrvFlowPort | 0 | 0 | The UDP or TCP port number used as a source port for this sender in this session. If the IP protocol in use, sp… |
| 1.3.6.1.2.1.52.1.2.1.11 | intSrvFlowFlowId | 0 | 0 | The flow ID that this sender is using, if this is an IPv6 session. |
| 1.3.6.1.2.1.52.1.2.1.12 | intSrvFlowInterface | 0 | 0 | The ifIndex value of the interface on which this reservation exists. |
| 1.3.6.1.2.1.52.1.2.1.13 | intSrvFlowIfAddr | 0 | 0 | The IP Address on the ifEntry on which this reservation exists. This is present primarily to support those interfaces which … |
| 1.3.6.1.2.1.52.1.2.1.14 | intSrvFlowRate | 0 | 0 | The Reserved Rate of the sender's data stream. If this is a Controlled Load service flow, this rate is derived from the Tspec ra… |
| 1.3.6.1.2.1.52.1.2.1.15 | intSrvFlowBurst | 0 | 0 | The size of the largest burst expected from the sender at a time. If this is less than the sender's advertised burst size, … |
| 1.3.6.1.2.1.52.1.2.1.16 | intSrvFlowWeight | 0 | 0 | The weight used to prioritize the traffic. Note that the interpretation of this object is implementation-specific, as im… |
| 1.3.6.1.2.1.52.1.2.1.17 | intSrvFlowQueue | 0 | 0 | The number of the queue used by this traffic. Note that the interpretation of this object is implementation-specific, as im… |
| 1.3.6.1.2.1.52.1.2.1.18 | intSrvFlowMinTU | 0 | 0 | The minimum message size for this flow. The policing algorithm will treat smaller messages as though they are this size. |
| 1.3.6.1.2.1.52.1.2.1.19 | intSrvFlowMaxTU | 0 | 0 | The maximum datagram size for this flow that will conform to the traffic specification. This value cannot exceed the MTU of the… |
| 1.3.6.1.2.1.52.1.2.1.20 | intSrvFlowBestEffort | 0 | 0 | The number of packets that were remanded to best effort service. |
| 1.3.6.1.2.1.52.1.2.1.21 | intSrvFlowPoliced | 0 | 0 | The number of packets policed since the incep- tion of the flow's service. |
| 1.3.6.1.2.1.52.1.2.1.22 | intSrvFlowDiscard | 0 | 0 | If 'true', the flow is to incur loss when traffic is policed. If 'false', policed traff- ic is treated as best effort traff… |
| 1.3.6.1.2.1.52.1.2.1.23 | intSrvFlowService | 0 | 0 | The QoS service being applied to this flow. |
| 1.3.6.1.2.1.52.1.2.1.24 | intSrvFlowOrder | 0 | 0 | In the event of ambiguity, the order in which the classifier should make its comparisons. The row with intSrvFlowOrder=0 is … |
| 1.3.6.1.2.1.52.1.2.1.25 | intSrvFlowStatus | 0 | 0 | 'active' for all active flows. This object may be used to install static classifier infor- mation, delete classifier informat… |